[PATCH 01/12] arm64: dts: exynos: add USB DWC3 supplies to Espresso board

[Alim Akhtar]

Hi Krzysztof

On Mon, Jan 24, 2022 at 1:34 PM Krzysztof Kozlowski
<krzysztof.kozlowski at canonical.com> wrote:
>
> Add required voltage regulators for USB DWC3 block on Exynos7 Espresso
> board.  Due to lack of schematics of Espresso board, the choice of
> regulators is approximate.  What bindings call VDD10, for Exynos7 should
> be actually called VDD09 (0.9 V).  Use regulators with a matching
> voltage range based on vendor sources for Meizu Pro 5 M576 handset (also
> with Exynos7420).
>

I checked Espresso board schematic, it is 0.9V for the USB and supplied by LDO4

> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at canonical.com>
> ---
>  arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 5 +++++
>  arch/arm64/boot/dts/exynos/exynos7.dtsi         | 2 +-
>  2 files changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
> index 125c03f351d9..4c45e689d34a 100644
> --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
> +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
> @@ -412,6 +412,11 @@ &ufs {
>         status = "okay";
>  };
>
> +&usbdrd {
> +       vdd10-supply = <&ldo4_reg>;
> +       vdd33-supply = <&ldo6_reg>;
> +};
> +
>  &usbdrd_phy {
>         vbus-supply = <&usb30_vbus_reg>;
>         vbus-boost-supply = <&usb3drd_boost_5v>;
> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> index c3efbc8add38..01b4210d8b62 100644
> --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> @@ -672,7 +672,7 @@ usbdrd_phy: phy at 15500000 {
>                         #phy-cells = <1>;
>                 };
>
> -               usbdrd3 {
> +               usbdrd: usb {
>                         compatible = "samsung,exynos7-dwusb3";
>                         clocks = <&clock_fsys0 ACLK_USBDRD300>,
>                                <&clock_fsys0 SCLK_USBDRD300_SUSPENDCLK>,
> --
> 2.32.0
>


-- 
Regards,
Alim