[PATCH] Adding architectural support for HPE's GXP BMC. This is the first of a series of patches to support HPE's BMC with Linux Kernel.
Krzysztof Kozlowski
krzysztof.kozlowski at canonical.com
Tue Jan 25 12:41:21 PST 2022
On 25/01/2022 20:46, nick.hawkins at hpe.com wrote:
> From: Nick Hawkins <nick.hawkins at hpe.com>
>
Thanks for the patches. The commit should come with description. Please
check other commits adding new sub-arch or boards for nice examples.
> Signed-off-by: Nick Hawkins <nick.hawkins at hpe.com>
> ---
> .../devicetree/bindings/vendor-prefixes.yaml | 2 +
> MAINTAINERS | 8 +
> arch/arm/Kconfig | 2 +
> arch/arm/boot/dts/gxp.dts | 700 ++++++++++++++++++
DTS goes separately.
> arch/arm/configs/gxp_defconfig | 243 ++++++
Defconfig is separate commit.
> arch/arm/mach-hpe/Kconfig | 20 +
> arch/arm/mach-hpe/Makefile | 1 +
> arch/arm/mach-hpe/gxp.c | 63 ++
> 8 files changed, 1039 insertions(+)
> create mode 100644 arch/arm/boot/dts/gxp.dts
> create mode 100644 arch/arm/configs/gxp_defconfig
> create mode 100644 arch/arm/mach-hpe/Kconfig
> create mode 100644 arch/arm/mach-hpe/Makefile
> create mode 100644 arch/arm/mach-hpe/gxp.c
>
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> index 294093d45a23..e8b0ec874aed 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> @@ -515,6 +515,8 @@ patternProperties:
> description: Jiangsu HopeRun Software Co., Ltd.
> "^hp,.*":
> description: Hewlett Packard
Is Hewlett Packard not an Enterprise?
> + "^hpe,.*":
> + description: Hewlett Packard Enterprise
...
> "^hsg,.*":
> description: HannStar Display Co.
> "^holtek,.*":
> diff --git a/MAINTAINERS b/MAINTAINERS
> index ea3e6c914384..007d99734dd1 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -8382,6 +8382,14 @@ L: linux-efi at vger.kernel.org
> S: Maintained
> F: block/partitions/efi.*
>
> +GXP ARCHITECTURE
> +M: Jean-Marie Verdun <verdun at hpe.com>
> +M: Nick Hawkins <nick.hawkins at hpe.com>
> +S: Maintained
> +F: arch/arm/boot/dts/gxp.dts
> +F: arch/arm/configs/gxp_defconfig
> +F: arch/arm/mach-hpe/gxp.c
> +
> H8/300 ARCHITECTURE
> M: Yoshinori Sato <ysato at users.sourceforge.jp>
> L: uclinux-h8-devel at lists.sourceforge.jp (moderated for non-subscribers)
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index fabe39169b12..d428d0d35889 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -708,6 +708,8 @@ source "arch/arm/mach-vt8500/Kconfig"
>
> source "arch/arm/mach-zynq/Kconfig"
>
> +source "arch/arm/mach-hpe/Kconfig"
All entries in that secion are ordered alphabetically, so mach-hp or
mach-hpe should not stick out.
> +
> # ARMv7-M architecture
> config ARCH_LPC18XX
> bool "NXP LPC18xx/LPC43xx"
> diff --git a/arch/arm/boot/dts/gxp.dts b/arch/arm/boot/dts/gxp.dts
This needs some better, longer name than just gxp... Look how other
files are named in that directory.
> new file mode 100644
> index 000000000000..7bd814ecaaee
> --- /dev/null
> +++ b/arch/arm/boot/dts/gxp.dts
Where is DTSI? What is this file about? Why there is no description?
What's the purpose?
Where is the dts Makefile change? How do you compile it?
> @@ -0,0 +1,700 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree file for HPE GXP
> + */
> +
> +/dts-v1/;
> +/ {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "HPE,GXP";
Didn't checkpatch complain about undocumented compatible?
If even if it did not, you need to document it. And solve all the issues
like - why uppercase, where is DTSI or SoC compatible... and what is it
exactly?
> + model = "GXP";
So informative... Model GXP like compatible.
> +
> + chosen {
> + bootargs = "earlyprintk console=ttyS0,115200 user_debug=31";
earlyprint is a debugging feature, not suitable for mainline DTS. The
same seems with "user_debug=31". Remove both.
Console should go to chosen stdout-path node instead.
> + };
> +
> + aliases {
> + };
No need for an empty node.
> +
> + memory at 40000000 {
> + device_type = "memory";
> + reg = <0x40000000 0x20000000>;
> + };
> +
> + ahb at 80000000 {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + vic0: vic at ceff0000 {
Node names should be generic, so this is interrupt-controller.
> + compatible = "arm,pl192-vic";
> + interrupt-controller;
> + reg = <0xceff0000 0x1000>;
> + #interrupt-cells = <1>;
> + };
> +
> + vic1: vic at 80f00000 {
> + compatible = "arm,pl192-vic";
> + interrupt-controller;
> + reg = <0x80f00000 0x1000>;
> + #interrupt-cells = <1>;
> + };
> +
> + timer0: timer at c0000080 {
> + compatible = "hpe,gxp-timer";
Undocumented compatible. Also looks too generic.
> + reg = <0xc0000080 0x1>, <0xc0000094 0x01>, <0xc0000088 0x08>;
> + interrupts = <0>;
> + interrupt-parent = <&vic0>;
> + clock-frequency = <400000000>;
> + };
> +
> + watchdog: watchdog at c0000090 {
> + compatible = "hpe,gxp-wdt";
Undocumented compatible. Also looks too generic.
> + reg = <0xc0000090 0x02>, <0xc0000096 0x01>;
> + };
> +
> + uartc: serial at c00000f0 {
> + compatible = "ns16550a";
> + reg = <0xc00000f0 0x8>;
> + interrupts = <19>;
> + interrupt-parent = <&vic0>;
> + clock-frequency = <1846153>;
> + reg-shift = <0>;
> + };
> +
> + uarta: serial at c00000e0 {
> + compatible = "ns16550a";
> + reg = <0xc00000e0 0x8>;
> + interrupts = <17>;
> + interrupt-parent = <&vic0>;
> + clock-frequency = <1846153>;
> + reg-shift = <0>;
> + };
> +
> + uartb: serial at c00000e8 {
> + compatible = "ns16550a";
> + reg = <0xc00000e8 0x8>;
> + interrupts = <18>;
> + interrupt-parent = <&vic0>;
> + clock-frequency = <1846153>;
> + reg-shift = <0>;
> + };
> +
> + vuart_a_cfg: vuarta_cfg at 80fc0230 {
> + compatible = "hpe,gxp-vuarta_cfg", "simple-mfd", "syscon";
> + reg = <0x80fc0230 0x100>;
> + reg-io-width = <1>;
> + };
> +
> + vuart_a: vuart_a at 80fd0200 {
> + compatible = "hpe,gxp-vuart";
> + reg = <0x80fd0200 0x100>;
> + interrupts = <2>;
> + interrupt-parent = <&vic1>;
> + clock-frequency = <1846153>;
> + reg-shift = <0>;
> + status = "okay";
> + serial-line = <3>;
> + vuart_cfg = <&vuart_a_cfg>;
> + };
> +
> + usb0: ehci at cefe0000 {
> + compatible = "generic-ehci";
> + reg = <0xcefe0000 0x100>;
> + interrupts = <7>;
> + interrupt-parent = <&vic0>;
> + };
> +
> + usb1: ohci at cefe0100 {
> + compatible = "generic-ohci";
> + reg = <0xcefe0100 0x110>;
> + interrupts = <6>;
> + interrupt-parent = <&vic0>;
> + };
> +
> + spifi0: spifi at c0000200 {
What is spifi? Maybe "spi"?
> + compatible = "hpe,gxp-spifi";
Undocumented compatible. Also looks too generic.
> + reg = <0xc0000200 0x80>, <0xc000c000 0x100>, <0xf8000000 0x8000000>;
> + interrupts = <20>;
> + interrupt-parent = <&vic0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + flash at 0 {
> + compatible = "jedec,spi-nor";
> + reg = <0>;
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + bmc at 0 {
> + label = "bmc";
> + reg = <0x0 0x2000000>;
> + };
> + u-boot at 0 {
> + label = "u-boot";
> + reg = <0x0 0x60000>;
> + };
> + u-boot-env at 60000 {
> + label = "u-boot-env";
> + reg = <0x60000 0x20000>;
> + };
> + kernel at 80000 {
> + label = "kernel";
> + reg = <0x80000 0x4c0000>;
> + };
> + rofs at 540000 {
> + label = "rofs";
> + reg = <0x540000 0x1740000>;
> + };
> + rwfs at 1c80000 {
> + label = "rwfs";
> + reg = <0x1c80000 0x250000>;
> + };
> + section at 1edf000{
> + label = "section";
> + reg = <0x1ed0000 0x130000>;
> + };
> + };
> + };
> +
> + flash at 1 {
> + compatible = "jedec,spi-nor";
> + reg = <1>;
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + host-prime at 0 {
> + label = "host-prime";
> + reg = <0x0 0x02000000>;
> + };
> + host-second at 0 {
> + label = "host-second";
> + reg = <0x02000000 0x02000000>;
> + };
> + };
> + };
> + };
> +
> + sram at d0000000 {
> + compatible = "mtd-ram";
> + reg = <0xd0000000 0x80000>;
> + bank-width = <1>;
> + erase-size =<1>;
> + partition at 0 {
> + label = "host-reserved";
> + reg = <0x0 0x10000>;
> + };
> + partition at 10000 {
> + label = "nvram";
> + reg = <0x10000 0x70000>;
> + };
> + };
> +
> + srom at 80fc0000 {
> + compatible = "hpe,gxp-srom", "simple-mfd", "syscon";
> + reg = <0x80fc0000 0x100>;
> + };
> +
> + vrom at 58000000 {
> + compatible = "mtd-ram";
> + bank-width = <4>;
> + reg = <0x58000000 0x4000000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + partition at 0 {
> + label = "vrom-prime";
> + reg = <0x0 0x2000000>;
> + };
> + partition at 2000000 {
> + label = "vrom-second";
> + reg = <0x2000000 0x2000000>;
> + };
> + };
> +
> + i2cg: i2cg at c00000f8 {
What's this exactly?
> + compatible = "syscon";
> + reg = <0xc00000f8 0x08>;
> + };
> +
> + i2c0: i2c at c0002000 {
> + compatible = "hpe,gxp-i2c";
> + reg = <0xc0002000 0x70>;
> + interrupts = <9>;
> + interrupt-parent = <&vic0>;
> + i2cg-handle = <&i2cg>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c1: i2c at c0002100 {
> + compatible = "hpe,gxp-i2c";
> + reg = <0xc0002100 0x70>;
> + interrupts = <9>;
> + interrupt-parent = <&vic0>;
> + i2cg-handle = <&i2cg>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c2: i2c at c0002200 {
> + compatible = "hpe,gxp-i2c";
> + reg = <0xc0002200 0x70>;
> + interrupts = <9>;
> + interrupt-parent = <&vic0>;
> + i2cg-handle = <&i2cg>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + 24c02 at 50 {
> + compatible = "atmel,24c02";
> + pagesize = <8>;
> + reg = <0x50>;
> + };
> + };
> +
> + i2c3: i2c at c0002300 {
> + compatible = "hpe,gxp-i2c";
> + reg = <0xc0002300 0x70>;
> + interrupts = <9>;
> + interrupt-parent = <&vic0>;
> + i2cg-handle = <&i2cg>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c4: i2c at c0002400 {
> + compatible = "hpe,gxp-i2c";
> + reg = <0xc0002400 0x70>;
> + interrupts = <9>;
> + interrupt-parent = <&vic0>;
> + i2cg-handle = <&i2cg>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c5: i2c at c0002500 {
> + compatible = "hpe,gxp-i2c";
> + reg = <0xc0002500 0x70>;
> + interrupts = <9>;
> + interrupt-parent = <&vic0>;
> + i2cg-handle = <&i2cg>;
> + };
> +
> + i2c6: i2c at c0002600 {
> + compatible = "hpe,gxp-i2c";
> + reg = <0xc0002600 0x70>;
> + interrupts = <9>;
> + interrupt-parent = <&vic0>;
> + i2cg-handle = <&i2cg>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c7: i2c at c0002700 {
> + compatible = "hpe,gxp-i2c";
> + reg = <0xc0002700 0x70>;
> + interrupts = <9>;
> + interrupt-parent = <&vic0>;
> + i2cg-handle = <&i2cg>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + psu1: psu at 58 {
> + compatible = "hpe,gxp-psu";
> + reg = <0x58>;
> + };
> +
> + psu2: psu at 59 {
> + compatible = "hpe,gxp-psu";
> + reg = <0x59>;
> + };
> + };
> +
> + i2c8: i2c at c0002800 {
> + compatible = "hpe,gxp-i2c";
> + reg = <0xc0002800 0x70>;
> + interrupts = <9>;
> + interrupt-parent = <&vic0>;
> + i2cg-handle = <&i2cg>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c9: i2c at c0002900 {
> + compatible = "hpe,gxp-i2c";
> + reg = <0xc0002900 0x70>;
> + interrupts = <9>;
> + interrupt-parent = <&vic0>;
> + i2cg-handle = <&i2cg>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2cmux at 4 {
Does it even compile with W=1? The unit address looks quite different
than what is below.
Also - node name should be generic.
> + compatible = "i2c-mux-reg";
> + i2c-parent = <&i2c4>;
> + reg = <0xd1000074 1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + i2c4 at 1 {
> + reg = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c4 at 3 {
> + reg = <3>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c4 at 4 {
> + reg = <4>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> +
> + i2cmux at 6 {
> + compatible = "i2c-mux-reg";
> + i2c-parent = <&i2c6>;
> + reg = <0xd1000076 1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + i2c6 at 1 {
> + reg = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c6 at 2 {
> + reg = <2>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c6 at 3 {
> + reg = <3>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c6 at 4 {
> + reg = <4>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c6 at 5 {
> + reg = <5>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> +
> + mdio0: mdio at c0004080 {
> + compatible = "hpe,gxp-umac-mdio";
> + reg = <0xc0004080 0x10>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + ext_phy0: ethernt-phy at 0 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + phy-mode = "sgmii";
> + reg = <0>;
> + };
> + };
> +
> + mdio1: mdio at c0005080 {
> + compatible = "hpe,gxp-umac-mdio";
> + reg = <0xc0005080 0x10>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + int_phy0: ethernt-phy at 0 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + phy-mode = "gmii";
> + reg = <0>;
> + };
> + int_phy1: ethernt-phy at 1 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + phy-mode = "gmii";
> + reg = <1>;
> + };
> + };
> +
> + umac0: umac at c0004000 {
> + compatible = "hpe, gxp-umac";
No spaces in compatibles. Previous comments about compatibles also
apply. About node name as well.
I'll stop on DTS now, because it does not look much better below.
> + reg = <0xc0004000 0x80>;
> + interrupts = <10>;
> + interrupt-parent = <&vic0>;
> + mac-address = [94 18 82 16 04 d8];
> + phy-handle = <&ext_phy0>;
> + int-phy-handle = <&int_phy0>;
> + };
> +
(...)
> diff --git a/arch/arm/configs/gxp_defconfig b/arch/arm/configs/gxp_defconfig
> new file mode 100644
> index 000000000000..f37c6630e06d
> --- /dev/null
> +++ b/arch/arm/configs/gxp_defconfig
> @@ -0,0 +1,243 @@
> +CONFIG_KERNEL_XZ=y
> +CONFIG_DEFAULT_HOSTNAME="gxp"
> +CONFIG_SYSVIPC=y
> +CONFIG_NO_HZ=y
> +CONFIG_HIGH_RES_TIMERS=y
> +CONFIG_BSD_PROCESS_ACCT=y
> +CONFIG_BSD_PROCESS_ACCT_V3=y
> +CONFIG_LOG_BUF_SHIFT=18
> +CONFIG_CFS_BANDWIDTH=y
> +CONFIG_RT_GROUP_SCHED=y
> +CONFIG_CGROUP_FREEZER=y
> +CONFIG_CGROUP_DEVICE=y
> +CONFIG_CGROUP_CPUACCT=y
> +CONFIG_NAMESPACES=y
> +CONFIG_SCHED_AUTOGROUP=y
> +CONFIG_RELAY=y
> +CONFIG_BLK_DEV_INITRD=y
> +CONFIG_CC_OPTIMIZE_FOR_SIZE=y
> +CONFIG_KALLSYMS_ALL=y
> +CONFIG_EMBEDDED=y
> +# CONFIG_COMPAT_BRK is not set
> +CONFIG_SLAB=y
> +CONFIG_ARCH_MULTI_V6=y
> +CONFIG_ARCH_HPE=y
> +CONFIG_ARCH_HPE_GXP=y
> +CONFIG_SECCOMP=y
> +# CONFIG_ATAGS is not set
> +CONFIG_ZBOOT_ROM_TEXT=0x0
> +CONFIG_ZBOOT_ROM_BSS=0x0
> +# CONFIG_SUSPEND is not set
> +CONFIG_JUMP_LABEL=y
> +# CONFIG_STRICT_KERNEL_RWX is not set
> +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
> +CONFIG_KSM=y
> +CONFIG_CLEANCACHE=y
> +CONFIG_NET=y
> +CONFIG_PACKET=y
> +CONFIG_PACKET_DIAG=y
> +CONFIG_UNIX=y
> +CONFIG_UNIX_DIAG=y
> +CONFIG_XFRM_USER=y
> +CONFIG_XFRM_STATISTICS=y
> +CONFIG_INET=y
> +CONFIG_VLAN_8021Q=y
> +CONFIG_NETLINK_DIAG=y
> +CONFIG_NET_NCSI=y
> +# CONFIG_WIRELESS is not set
> +CONFIG_DEVTMPFS=y
> +CONFIG_DEVTMPFS_MOUNT=y
> +# CONFIG_STANDALONE is not set
> +CONFIG_MTD=y
> +CONFIG_MTD_BLOCK=y
> +CONFIG_MTD_PHYSMAP=y
> +CONFIG_MTD_PHYSMAP_OF=y
> +CONFIG_MTD_PLATRAM=y
> +CONFIG_MTD_SPI_NOR=y
> +CONFIG_SPI_GXP_SPIFI=y
> +CONFIG_BLK_DEV_NULL_BLK=y
> +CONFIG_BLK_DEV_LOOP=y
> +CONFIG_BLK_DEV_NBD=y
> +CONFIG_BLK_DEV_RAM=y
> +CONFIG_EEPROM_AT24=y
> +CONFIG_SCSI=y
> +CONFIG_BLK_DEV_SD=y
> +# CONFIG_SCSI_LOWLEVEL is not set
> +CONFIG_NETDEVICES=y
> +# CONFIG_NET_VENDOR_ALACRITECH is not set
> +# CONFIG_NET_VENDOR_AMAZON is not set
> +# CONFIG_NET_VENDOR_AQUANTIA is not set
> +# CONFIG_NET_VENDOR_ARC is not set
> +# CONFIG_NET_VENDOR_AURORA is not set
> +# CONFIG_NET_VENDOR_BROADCOM is not set
> +# CONFIG_NET_VENDOR_CADENCE is not set
> +# CONFIG_NET_VENDOR_CAVIUM is not set
> +# CONFIG_NET_VENDOR_CIRRUS is not set
> +# CONFIG_NET_VENDOR_CORTINA is not set
> +# CONFIG_NET_VENDOR_EZCHIP is not set
> +# CONFIG_NET_VENDOR_FARADAY is not set
> +# CONFIG_NET_VENDOR_GOOGLE is not set
> +# CONFIG_NET_VENDOR_HISILICON is not set
> +# CONFIG_NET_VENDOR_HUAWEI is not set
> +# CONFIG_NET_VENDOR_INTEL is not set
> +# CONFIG_NET_VENDOR_MARVELL is not set
> +# CONFIG_NET_VENDOR_MELLANOX is not set
> +# CONFIG_NET_VENDOR_MICREL is not set
> +# CONFIG_NET_VENDOR_MICROCHIP is not set
> +# CONFIG_NET_VENDOR_MICROSEMI is not set
> +# CONFIG_NET_VENDOR_NATSEMI is not set
> +# CONFIG_NET_VENDOR_NETRONOME is not set
> +# CONFIG_NET_VENDOR_NI is not set
> +# CONFIG_NET_VENDOR_QUALCOMM is not set
> +# CONFIG_NET_VENDOR_RENESAS is not set
> +# CONFIG_NET_VENDOR_ROCKER is not set
> +# CONFIG_NET_VENDOR_SAMSUNG is not set
> +# CONFIG_NET_VENDOR_SEEQ is not set
> +# CONFIG_NET_VENDOR_SOLARFLARE is not set
> +# CONFIG_NET_VENDOR_SMSC is not set
> +# CONFIG_NET_VENDOR_SOCIONEXT is not set
> +# CONFIG_NET_VENDOR_STMICRO is not set
> +# CONFIG_NET_VENDOR_SYNOPSYS is not set
> +# CONFIG_NET_VENDOR_VIA is not set
> +# CONFIG_NET_VENDOR_WIZNET is not set
> +# CONFIG_NET_VENDOR_XILINX is not set
> +CONFIG_UMAC=y
> +# CONFIG_USB_NET_DRIVERS is not set
> +# CONFIG_WLAN is not set
> +# CONFIG_INPUT_LEDS is not set
> +CONFIG_INPUT_EVDEV=y
> +# CONFIG_KEYBOARD_ATKBD is not set
> +CONFIG_KEYBOARD_GPIO=y
> +CONFIG_KEYBOARD_GPIO_POLLED=y
> +# CONFIG_INPUT_MOUSE is not set
> +CONFIG_SERIO_LIBPS2=y
> +CONFIG_VT_HW_CONSOLE_BINDING=y
> +# CONFIG_LEGACY_PTYS is not set
> +CONFIG_SERIAL_8250=y
> +# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
> +CONFIG_SERIAL_8250_CONSOLE=y
> +CONFIG_SERIAL_8250_NR_UARTS=6
> +CONFIG_SERIAL_8250_RUNTIME_UARTS=6
> +CONFIG_SERIAL_8250_EXTENDED=y
> +CONFIG_SERIAL_8250_SHARE_IRQ=y
> +CONFIG_SERIAL_8250_GXP_VUART=y
> +CONFIG_SERIAL_OF_PLATFORM=y
> +CONFIG_TTY_PRINTK=y
> +CONFIG_IPMI_HANDLER=y
> +CONFIG_IPMI_DEVICE_INTERFACE=y
> +CONFIG_IPMI_SI=y
> +CONFIG_IPMI_SSIF=y
> +CONFIG_HPE_KCS_IPMI_BMC=y
> +CONFIG_HW_RANDOM_TIMERIOMEM=y
> +CONFIG_I2C_CHARDEV=y
> +CONFIG_I2C_GXP=y
> +CONFIG_I2C_SLAVE=y
> +CONFIG_I2C_SLAVE_EEPROM=y
> +CONFIG_SPI=y
> +CONFIG_GPIOLIB=y
> +CONFIG_GPIO_SYSFS=y
> +CONFIG_GPIO_GXP=y
> +CONFIG_SENSORS_EMC1403=y
> +CONFIG_SENSORS_GXP_FAN_CTRL=y
> +CONFIG_SENSORS_GXP_CORETEMP=y
> +CONFIG_SENSORS_GXP_PSU=y
> +CONFIG_SENSORS_GXP_POWER=y
> +CONFIG_WATCHDOG=y
> +CONFIG_GXP_WATCHDOG=y
> +CONFIG_MFD_SYSCON=y
> +CONFIG_FB=y
> +CONFIG_FB_THUMBNAIL=y
> +CONFIG_FB_SIMPLE=y
> +CONFIG_USB=y
> +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_ROOT_HUB_TT=y
> +CONFIG_USB_OHCI_HCD=y
> +CONFIG_USB_OHCI_HCD_PLATFORM=y
> +CONFIG_USB_STORAGE=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GXP_UDC=y
> +CONFIG_USB_CONFIGFS=y
> +CONFIG_USB_CONFIGFS_SERIAL=y
> +CONFIG_USB_CONFIGFS_ACM=y
> +CONFIG_USB_CONFIGFS_OBEX=y
> +CONFIG_USB_CONFIGFS_NCM=y
> +CONFIG_USB_CONFIGFS_ECM=y
> +CONFIG_USB_CONFIGFS_ECM_SUBSET=y
> +CONFIG_USB_CONFIGFS_RNDIS=y
> +CONFIG_USB_CONFIGFS_EEM=y
> +CONFIG_USB_CONFIGFS_MASS_STORAGE=y
> +CONFIG_USB_CONFIGFS_F_LB_SS=y
> +CONFIG_USB_CONFIGFS_F_FS=y
> +CONFIG_USB_CONFIGFS_F_HID=y
> +CONFIG_USB_CONFIGFS_F_PRINTER=y
> +CONFIG_NEW_LEDS=y
> +CONFIG_LEDS_CLASS=y
> +CONFIG_LEDS_GPIO=y
> +CONFIG_LEDS_TRIGGERS=y
> +CONFIG_LEDS_TRIGGER_TIMER=y
> +CONFIG_LEDS_TRIGGER_ONESHOT=y
> +CONFIG_LEDS_TRIGGER_MTD=y
> +CONFIG_LEDS_TRIGGER_HEARTBEAT=y
> +CONFIG_LEDS_TRIGGER_CPU=y
> +CONFIG_LEDS_TRIGGER_GPIO=y
> +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
> +CONFIG_LEDS_TRIGGER_TRANSIENT=y
> +CONFIG_LEDS_TRIGGER_PANIC=y
> +# CONFIG_VIRTIO_MENU is not set
> +# CONFIG_IOMMU_SUPPORT is not set
> +CONFIG_HPE_GXP_XREG=y
> +CONFIG_HPE_GXP_FN2=y
> +CONFIG_HPE_GXP_CSM=y
> +CONFIG_HPE_GXP_SROM=y
> +CONFIG_FANOTIFY=y
> +CONFIG_OVERLAY_FS=y
> +CONFIG_OVERLAY_FS_REDIRECT_DIR=y
> +CONFIG_TMPFS=y
> +CONFIG_TMPFS_POSIX_ACL=y
> +CONFIG_JFFS2_FS=y
> +# CONFIG_JFFS2_FS_WRITEBUFFER is not set
> +CONFIG_JFFS2_SUMMARY=y
> +CONFIG_JFFS2_FS_XATTR=y
> +# CONFIG_JFFS2_FS_POSIX_ACL is not set
> +# CONFIG_JFFS2_FS_SECURITY is not set
> +CONFIG_SQUASHFS=y
> +CONFIG_SQUASHFS_XZ=y
> +CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
> +# CONFIG_NETWORK_FILESYSTEMS is not set
> +CONFIG_NLS_CODEPAGE_437=y
> +CONFIG_NLS_ASCII=y
> +CONFIG_NLS_ISO8859_1=y
> +CONFIG_NLS_UTF8=y
> +CONFIG_CRYPTO_CCM=y
> +CONFIG_CRYPTO_GCM=y
> +CONFIG_CRYPTO_CRC32C=y
> +CONFIG_CRYPTO_ARC4=y
> +CONFIG_CRYPTO_DEFLATE=y
> +CONFIG_CRYPTO_LZO=y
> +CONFIG_CRYPTO_ZSTD=y
> +CONFIG_CRYPTO_USER_API_HASH=y
> +# CONFIG_CRYPTO_HW is not set
> +CONFIG_CRC16=y
> +# CONFIG_XZ_DEC_ARM is not set
> +# CONFIG_XZ_DEC_ARMTHUMB is not set
> +CONFIG_DMA_API_DEBUG=y
> +CONFIG_PRINTK_TIME=y
> +CONFIG_BOOT_PRINTK_DELAY=y
> +CONFIG_DYNAMIC_DEBUG=y
> +CONFIG_DEBUG_INFO=y
> +# CONFIG_ENABLE_MUST_CHECK is not set
> +CONFIG_MAGIC_SYSRQ=y
> +CONFIG_PANIC_ON_OOPS=y
> +CONFIG_FUNCTION_PROFILER=y
> +CONFIG_STACK_TRACER=y
> +CONFIG_SCHED_TRACER=y
> +CONFIG_STRICT_DEVMEM=y
> +CONFIG_DEBUG_USER=y
> +CONFIG_DEBUG_LL=y
> +CONFIG_DEBUG_LL_UART_8250=y
> +CONFIG_DEBUG_UART_PHYS=0xC00000F0
> +CONFIG_DEBUG_UART_VIRT=0xF00000F0
> +CONFIG_DEBUG_UART_8250_SHIFT=0
> +CONFIG_EARLY_PRINTK=y
> +CONFIG_TEST_KSTRTOX=y
> diff --git a/arch/arm/mach-hpe/Kconfig b/arch/arm/mach-hpe/Kconfig
> new file mode 100644
> index 000000000000..9b27f97c6536
> --- /dev/null
> +++ b/arch/arm/mach-hpe/Kconfig
> @@ -0,0 +1,20 @@
> +menuconfig ARCH_HPE
> + bool "HPE SoC support"
> + help
> + This enables support for HPE ARM based SoC chips
> +if ARCH_HPE
> +
> +config ARCH_HPE_GXP
> + bool "HPE GXP SoC"
> + select ARM_VIC
> + select PINCTRL
> + select IRQ_DOMAIN
> + select GENERIC_IRQ_CHIP
> + select MULTI_IRQ_HANDLER
> + select SPARSE_IRQ
> + select CLKSRC_MMIO
> + depends on ARCH_MULTI_V7
> + help
> + Support for GXP SoCs
> +
> +endif
> diff --git a/arch/arm/mach-hpe/Makefile b/arch/arm/mach-hpe/Makefile
> new file mode 100644
> index 000000000000..8b0a91234df4
> --- /dev/null
> +++ b/arch/arm/mach-hpe/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_ARCH_HPE_GXP) += gxp.o
> diff --git a/arch/arm/mach-hpe/gxp.c b/arch/arm/mach-hpe/gxp.c
> new file mode 100644
> index 000000000000..b58f25fbae5a
> --- /dev/null
> +++ b/arch/arm/mach-hpe/gxp.c
> @@ -0,0 +1,63 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* Copyright (C) 2022 Hewlett-Packard Enterprise Development Company, L.P.
> + *
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +
> +#include <linux/init.h>
> +#include <asm/mach/arch.h>
> +#include <asm/mach/map.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +#include <linux/clk-provider.h>
> +#include <linux/clocksource.h>
> +
> +#define IOP_REGS_PHYS_BASE 0xc0000000
> +#define IOP_REGS_VIRT_BASE 0xf0000000
> +#define IOP_REGS_SIZE (240*SZ_1M)
> +
> +#define IOP_EHCI_USBCMD 0x0efe0010
> +
> +static struct map_desc gxp_io_desc[] __initdata = {
> + {
> + .virtual = (unsigned long)IOP_REGS_VIRT_BASE,
> + .pfn = __phys_to_pfn(IOP_REGS_PHYS_BASE),
> + .length = IOP_REGS_SIZE,
> + .type = MT_DEVICE,
> + },
> +};
> +
> +void __init gxp_map_io(void)
> +{
> + iotable_init(gxp_io_desc, ARRAY_SIZE(gxp_io_desc));
> +}
> +
> +static void __init gxp_dt_init(void)
> +{
> + //reset EHCI host controller for clear start
Linux style comments please, so /*.
> + __raw_writel(0x00080002,
What is this magic value?
> + (void __iomem *)(IOP_REGS_VIRT_BASE + IOP_EHCI_USBCMD));
Why do you need the cast?
> + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
> +}
> +
> +static void gxp_restart(enum reboot_mode mode, const char *cmd)
> +{
> + pr_info("gpx restart");
Skip it.
> + __raw_writel(1, (void __iomem *) IOP_REGS_VIRT_BASE);
> +}
> +
> +static const char * const gxp_board_dt_compat[] = {
> + "HPE,GXP",
> + NULL,
> +};
> +
> +DT_MACHINE_START(GXP_DT, "HPE GXP")
> + .init_machine = gxp_dt_init,
> + .map_io = gxp_map_io,
> + .restart = gxp_restart,
> + .dt_compat = gxp_board_dt_compat,
> +MACHINE_END
Best regards,
Krzysztof
More information about the linux-arm-kernel
mailing list