[PATCH 1/4] arm64: dts: zynqmp: add AMS driver to device tree

[Michal Simek]

On 1/20/22 02:02, Robert Hancock wrote:
> Add an entry to the ZynqMP device tree to support the AMS device which
> now has a driver in mainline.
> 
> Signed-off-by: Robert Hancock <robert.hancock at calian.com>
> ---
>   .../arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi |  4 +++
>   arch/arm64/boot/dts/xilinx/zynqmp.dtsi        | 26 +++++++++++++++++++
>   2 files changed, 30 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
> index 1e0b1bca7c94..108592104a1b 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
> @@ -239,6 +239,10 @@ &lpd_watchdog {
>   	clocks = <&zynqmp_clk LPD_WDT>;
>   };
>   
> +&xilinx_ams {
> +	clocks = <&zynqmp_clk AMS_REF>;
> +};

Please send this patch out of the series. It should go via soc tree not via iio 
tree.
And unfortunately clock is not listed in DT binding document and needs to be 
added there.
Can you please send that patch too? dtbs_check reports it as issue.

> +
>   &zynqmp_dpdma {
>   	clocks = <&zynqmp_clk DPDMA_REF>;
>   };
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> index 74e66443e4ce..d1fe1e5b46c1 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> @@ -878,6 +878,32 @@ lpd_watchdog: watchdog at ff150000 {
>   			timeout-sec = <10>;
>   		};
>   
> +		xilinx_ams: ams at ffa50000 {
> +			compatible = "xlnx,zynqmp-ams";
> +			status = "disabled";
> +			interrupt-parent = <&gic>;
> +			interrupts = <0 56 4>;
> +			reg = <0x0 0xffa50000 0x0 0x800>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			#io-channel-cells = <1>;
> +			ranges = <0 0 0xffa50800 0x800>;
> +
> +			ams_ps: ams_ps at 0 {
> +				compatible = "xlnx,zynqmp-ams-ps";
> +				status = "disabled";
> +				reg = <0x0 0x400>;
> +			};
> +
> +			ams_pl: ams_pl at 400 {
> +				compatible = "xlnx,zynqmp-ams-pl";
> +				status = "disabled";
> +				reg = <0x400 0x400>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +		};
> +
>   		zynqmp_dpdma: dma-controller at fd4c0000 {
>   			compatible = "xlnx,zynqmp-dpdma";
>   			status = "disabled";

And this second piece is completely aligned with dt binding that's why it is fine.

Thanks,
Michal