[PATCH RESEND v2 1/5] dt-bindings: pci: st-pcie: PCIe controller found on STi platforms

[Bjorn Helgaas]

On Mon, Jan 03, 2022 at 08:47:27AM +0100, Alain Volmat wrote:
> Addition of the bindings for the Designware based PCIe controller
> that can be found on STi platforms such as STiH407, STiH410 or STiH418.
> 
> Signed-off-by: Alain Volmat <avolmat at me.com>
> ---
>  .../devicetree/bindings/pci/snps,dw-pcie.yaml |   2 +-
>  .../devicetree/bindings/pci/st,st-pcie.yaml   | 112 ++++++++++++++++++
>  2 files changed, 113 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/pci/st,st-pcie.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
> index 9ed0dfba7f89..3a92078128f7 100644
> --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
> @@ -35,7 +35,7 @@ properties:
>      maxItems: 5
>      items:
>        enum: [ dbi, dbi2, config, atu, app, elbi, mgmt, ctrl, parf, cfg, link,
> -              ulreg, smu, mpu, apb, phy ]
> +              ulreg, smu, mpu, apb, phy, mem-window ]
>  
>    num-lanes:
>      description: |
> diff --git a/Documentation/devicetree/bindings/pci/st,st-pcie.yaml b/Documentation/devicetree/bindings/pci/st,st-pcie.yaml
> new file mode 100644
> index 000000000000..2fa686d573c3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/st,st-pcie.yaml
> @@ -0,0 +1,112 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/st,st-pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: PCIe RC controller on ST STi platform
> +
> +maintainers:
> +  - Alain Volmat <avolmat at me.com>
> +
> +allOf:
> +  - $ref: /schemas/pci/snps,dw-pcie.yaml#
> +
> +properties:
> +  compatible:
> +    const: st,stih407-pcie
> +
> +  reg:
> +    items:
> +      - description: Controller control and status registers.
> +      - description: PCIe configuration registers.
> +      - description: Memory made available to the controller
> +
> +  reg-names:
> +    items:
> +      - const: dbi
> +      - const: config
> +      - const: mem-window

I guess "mem-window" is the range for inbound DMA?  Other controllers
should have similar ranges.  Can we use the same DT reg names used by
other controllers instead of adding something new and STi-specific?

> +  interrupts:
> +    maxItems: 1
> +
> +  resets:
> +    items:
> +    - description: Controller reset
> +    - description: Powerdown reset (optional)
> +    minItems: 1
> +
> +  reset-names:
> +    items:
> +      - const: softreset
> +      - const: powerdown

"softreset" and "powerdown" appear only in this binding.  Are they
really unique to STi, or can we use the same names used for other
controllers?