[PATCH RFC 1/4] brcmfmac: use separate firmware for 43430 revision 4

Stefan Wahren stefan.wahren at i2se.com
Sat Jan 22 04:35:47 PST 2022


Am 01.01.22 um 21:26 schrieb Stefan Wahren:
> A separate firmware is needed, for Broadcom 43430 revision 4. This
> chip can be found on e.g. certain revisions of Raspberry Pi Zero 2 W.
> Original firmware file from IC vendor is named 'brcmfmac43436-sdio.bin',
> but brcmfmac and also btbcm drivers report chip id 43430, so requested
> firmware file name is 'brcmfmac43430c0-sdio.bin' in line with other
> 43430 revisions.
>
> Signed-off-by: Stefan Wahren <stefan.wahren at i2se.com>
> ---
>
> Hi,
> i'm not sure about all these mappings. All i can say is that the wifi
> interface of the RPi Zero 2 cames up with this patch.
gentle ping (yes, i'm aware of the merge window)
>
>  drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
> index 8effeb7..c79bd47 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
> @@ -618,6 +618,7 @@ BRCMF_FW_DEF(43430A0, "brcmfmac43430a0-sdio");
>  /* Note the names are not postfixed with a1 for backward compatibility */
>  BRCMF_FW_CLM_DEF(43430A1, "brcmfmac43430-sdio");
>  BRCMF_FW_DEF(43430B0, "brcmfmac43430b0-sdio");
> +BRCMF_FW_CLM_DEF(43430C0, "brcmfmac43430c0-sdio");
>  BRCMF_FW_CLM_DEF(43455, "brcmfmac43455-sdio");
>  BRCMF_FW_DEF(43456, "brcmfmac43456-sdio");
>  BRCMF_FW_CLM_DEF(4354, "brcmfmac4354-sdio");
> @@ -649,7 +650,8 @@ static const struct brcmf_firmware_mapping brcmf_sdio_fwnames[] = {
>  	BRCMF_FW_ENTRY(BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, 4339),
>  	BRCMF_FW_ENTRY(BRCM_CC_43430_CHIP_ID, 0x00000001, 43430A0),
>  	BRCMF_FW_ENTRY(BRCM_CC_43430_CHIP_ID, 0x00000002, 43430A1),
> -	BRCMF_FW_ENTRY(BRCM_CC_43430_CHIP_ID, 0xFFFFFFFC, 43430B0),
> +	BRCMF_FW_ENTRY(BRCM_CC_43430_CHIP_ID, 0x00000004, 43430C0),
> +	BRCMF_FW_ENTRY(BRCM_CC_43430_CHIP_ID, 0xFFFFFFF8, 43430B0),
>  	BRCMF_FW_ENTRY(BRCM_CC_4345_CHIP_ID, 0x00000200, 43456),
>  	BRCMF_FW_ENTRY(BRCM_CC_4345_CHIP_ID, 0xFFFFFDC0, 43455),
>  	BRCMF_FW_ENTRY(BRCM_CC_4354_CHIP_ID, 0xFFFFFFFF, 4354),



More information about the linux-arm-kernel mailing list