[PATCH 0/3] dt-bindings: dmaengine: zynqmp_dma: Convert binding to YAML

[Michal Simek]

On 1/12/22 16:15, Michael Tretter wrote:
> Hi,
> 
> This series converts the ZynqMP dma engine dt bindings to yaml and fixes the
> ZynqMP device tree following the stricter yaml bindings.
> 
> The series is based on https://github.com/Xilinx/linux-xlnx/tree/zynqmp/dt to
> avoid conflicts when applying the patches to the zynqmp/dt tree.
> 
> Patch 1 converts the binding to yaml, Patches 2 and 3 cleanup the dma engine
> nodes in the zynqmp.dtsi that is included by actual board device trees.
> 
> Michael
> 
> Michael Tretter (3):
>    dt-bindings: dmaengine: zynqmp_dma: convert to yaml
>    arm64: zynqmp: Add missing #dma-cells property
>    arm64: zynqmp: Rename dma to dma-controller
> 
>   .../dma/xilinx/xlnx,zynqmp-dma-1.0.yaml       | 85 +++++++++++++++++++
>   .../bindings/dma/xilinx/zynqmp_dma.txt        | 26 ------
>   arch/arm64/boot/dts/xilinx/zynqmp.dtsi        | 48 +++++++----
>   3 files changed, 117 insertions(+), 42 deletions(-)
>   create mode 100644 Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml
>   delete mode 100644 Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
> 

Rob/Vinod:
Not sure how you want to split it but feel free to take 2/3 and 3/3 via your 
tree with my ack.

Acked-by: Michal Simek <michal.simek at xilinx.com>

If you want to take just 1/3 I will take the rest via my soc tree.

Thanks,
Michal