[PATCH v1 1/2] arm64: dts: imx8mq: fix mipi_csi bidirectional port numbers

[Martin Kepplinger]

The port numbers for the imx8mq mipi csi controller are wrong and
the mipi driver can't find any media devices as port at 1 is connected
to the CSI bridge, not port at 0. And port at 0 is connected to the
source - the sensor. Fix this.

Fixes: bcadd5f66c2a ("arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions")
Signed-off-by: Martin Kepplinger <martin.kepplinger at puri.sm>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 2df2510d0118..bb68c94c2fc9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -1151,8 +1151,8 @@ ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port at 0 {
-						reg = <0>;
+					port at 1 {
+						reg = <1>;
 
 						csi1_mipi_ep: endpoint {
 							remote-endpoint = <&csi1_ep>;
@@ -1203,8 +1203,8 @@ ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port at 0 {
-						reg = <0>;
+					port at 1 {
+						reg = <1>;
 
 						csi2_mipi_ep: endpoint {
 							remote-endpoint = <&csi2_ep>;
-- 
2.30.2