[PATCH 2/7] arm64: dts: ls1028a: move Mali DP500 node into /soc

[Leo Li]

> -----Original Message-----
> From: Michael Walle <michael at walle.cc>
> Sent: Tuesday, August 31, 2021 9:40 PM
> To: linux-arm-kernel at lists.infradead.org; devicetree at vger.kernel.org; linux-
> kernel at vger.kernel.org
> Cc: Shawn Guo <shawnguo at kernel.org>; Leo Li <leoyang.li at nxp.com>; Rob
> Herring <robh+dt at kernel.org>; Vladimir Oltean <vladimir.oltean at nxp.com>;
> Michael Walle <michael at walle.cc>
> Subject: [PATCH 2/7] arm64: dts: ls1028a: move Mali DP500 node into /soc
> 
> Move it inside the /soc subnode because it is part of the CCSR space.

I just noticed that the dp0_out label has been changed to dpi0_out besides the move.  Is this an intentional change or a typo?  If intentional we probably should mention it, otherwise we should change it back as it is breaking build for off-tree patch that uses the label.

> 
> Signed-off-by: Michael Walle <michael at walle.cc>
> ---
>  .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 41 ++++++++++---------
>  1 file changed, 21 insertions(+), 20 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index 9a65a7118faa..92e4f004c1c2 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -793,6 +793,27 @@ QORIQ_CLK_PLL_DIV(16)>,
>  			clock-names = "wdog_clk", "apb_pclk";
>  		};
> 
> +		malidp0: display at f080000 {
> +			compatible = "arm,mali-dp500";
> +			reg = <0x0 0xf080000 0x0 0x10000>;
> +			interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
> +				     <0 223 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "DE", "SE";
> +			clocks = <&dpclk>,
> +				 <&clockgen QORIQ_CLK_HWACCEL 2>,
> +				 <&clockgen QORIQ_CLK_HWACCEL 2>,
> +				 <&clockgen QORIQ_CLK_HWACCEL 2>;
> +			clock-names = "pxlclk", "mclk", "aclk", "pclk";
> +			arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
> +			arm,malidp-arqos-value = <0xd000d000>;
> +
> +			port {
> +				dpi0_out: endpoint {
> +
> +				};
> +			};
> +		};
> +
>  		sai1: audio-controller at f100000 {
>  			#sound-dai-cells = <0>;
>  			compatible = "fsl,vf610-sai";
> @@ -1139,24 +1160,4 @@ ftm_alarm0: timer at 2800000 {
>  		};
>  	};
> 
> -	malidp0: display at f080000 {
> -		compatible = "arm,mali-dp500";
> -		reg = <0x0 0xf080000 0x0 0x10000>;
> -		interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
> -			     <0 223 IRQ_TYPE_LEVEL_HIGH>;
> -		interrupt-names = "DE", "SE";
> -		clocks = <&dpclk>,
> -			 <&clockgen QORIQ_CLK_HWACCEL 2>,
> -			 <&clockgen QORIQ_CLK_HWACCEL 2>,
> -			 <&clockgen QORIQ_CLK_HWACCEL 2>;
> -		clock-names = "pxlclk", "mclk", "aclk", "pclk";
> -		arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
> -		arm,malidp-arqos-value = <0xd000d000>;
> -
> -		port {
> -			dp0_out: endpoint {
> -
> -			};
> -		};
> -	};
>  };
> --
> 2.30.2