[PATCH 0/9] i.MX8MP power-domains part 1 and GPU support

[Lucas Stach]

Hi all,

this series starts adding the power-domain control for the i.MX8MP
SoC. The GPCv2 support is complete (at least from going over the RM,
TF-A and experience with other i.MX8M* SoCs), but not all
power-domains are usable right now. Currently only the HSIO
(USB and PCIe) and GPU power domains are enabled.

Other power domains (MEDIA, VPU, HDMI, AUDIO) can be added when the
blk-ctrl driver support for those domains is ready, which is still
work in progress at the moment. As my priorities are shifting to
other things for a while, I wanted to push out the part that is
usable now and enables more functionality on the i.MX8MP.

Regards,
Lucas

Lucas Stach (9):
  soc: imx: gpcv2: add PGC control register indirection
  dt-bindings: power: add defines for i.MX8MP power domain
  soc: imx: gpcv2: add support for i.MX8MP power domains
  dt-bindings: power: imx8mp: add defines for HSIO blk-ctrl domains
  dt-bindings: soc: add binding for i.MX8MP HSIO blk-ctrl
  soc: imx: add i.MX8MP HSIO blk-ctrl
  arm64: dts: imx8mp: add HSIO power-domains
  arm64: dts: imx8mp: add GPU power domains
  arm64: dts: imx8mp: add GPU nodes

 .../bindings/power/fsl,imx-gpcv2.yaml         |   2 +
 .../soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml     |  78 +++
 arch/arm64/boot/dts/freescale/imx8mp.dtsi     | 118 ++++-
 drivers/soc/imx/Makefile                      |   1 +
 drivers/soc/imx/gpcv2.c                       | 430 ++++++++++++++++-
 drivers/soc/imx/imx8mp-blk-ctrl.c             | 444 ++++++++++++++++++
 include/dt-bindings/power/imx8mp-power.h      |  35 ++
 7 files changed, 1090 insertions(+), 18 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml
 create mode 100644 drivers/soc/imx/imx8mp-blk-ctrl.c
 create mode 100644 include/dt-bindings/power/imx8mp-power.h

-- 
2.30.2