[PATCH] dt-bindings: i2c: imx: Make each example a separate entry

[Rob Herring]

Each independent example should be a separate entry. This allows for
'interrupts' to have different cell sizes.

Signed-off-by: Rob Herring <robh at kernel.org>
---
 Documentation/devicetree/bindings/i2c/i2c-imx.yaml | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
index c167958ae2a9..01720e338b4c 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
@@ -88,9 +88,7 @@ unevaluatedProperties: false
 examples:
   - |
     #include <dt-bindings/clock/imx5-clock.h>
-    #include <dt-bindings/clock/vf610-clock.h>
-    #include <dt-bindings/gpio/gpio.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
 
     i2c at 83fc4000 {
         compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
@@ -99,6 +97,9 @@ examples:
         clocks = <&clks IMX5_CLK_I2C2_GATE>;
     };
 
+  - |
+    #include <dt-bindings/clock/vf610-clock.h>
+
     i2c at 40066000 {
         compatible = "fsl,vf610-i2c";
         reg = <0x40066000 0x1000>;
-- 
2.32.0