[PATCH net v3 6/9] net: axienet: Fix TX ring slot available check

[Robert Hancock]

The check for whether a TX ring slot was available was incorrect,
since a slot which had been loaded with transmit data but the device had
not started transmitting would be treated as available, potentially
causing non-transmitted slots to be overwritten. The control field in
the descriptor should be checked, rather than the status field (which may
only be updated when the device completes the entry).

Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock at calian.com>
---
 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 3f92001bacaf..85fe2b3bd37a 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -643,7 +643,6 @@ static int axienet_free_tx_chain(struct net_device *ndev, u32 first_bd,
 		if (cur_p->skb && (status & XAXIDMA_BD_STS_COMPLETE_MASK))
 			dev_consume_skb_irq(cur_p->skb);
 
-		cur_p->cntrl = 0;
 		cur_p->app0 = 0;
 		cur_p->app1 = 0;
 		cur_p->app2 = 0;
@@ -651,6 +650,7 @@ static int axienet_free_tx_chain(struct net_device *ndev, u32 first_bd,
 		cur_p->skb = NULL;
 		/* ensure our transmit path and device don't prematurely see status cleared */
 		wmb();
+		cur_p->cntrl = 0;
 		cur_p->status = 0;
 
 		if (sizep)
@@ -713,7 +713,7 @@ static inline int axienet_check_tx_bd_space(struct axienet_local *lp,
 	/* Ensure we see all descriptor updates from device or TX IRQ path */
 	rmb();
 	cur_p = &lp->tx_bd_v[(lp->tx_bd_tail + num_frag) % lp->tx_bd_num];
-	if (cur_p->status & XAXIDMA_BD_STS_ALL_MASK)
+	if (cur_p->cntrl)
 		return NETDEV_TX_BUSY;
 	return 0;
 }
-- 
2.31.1