[PATCH v2 04/16] clk: samsung: fsd: Add initial clock support

[Krzysztof Kozlowski]

On 18/01/2022 15:48, Alim Akhtar wrote:
> Add initial clock support for FSD (Full Self-Driving) SoC
> which is required to bring-up platforms based on this SoC.
> 
> Cc: linux-fsd at tesla.com
> Signed-off-by: Jayati Sahu <jayati.sahu at samsung.com>
> Signed-off-by: Ajay Kumar <ajaykumar.rs at samsung.com>
> Signed-off-by: Pankaj Dubey <pankaj.dubey at samsung.com>
> Signed-off-by: Alim Akhtar <alim.akhtar at samsung.com>
> ---
>  drivers/clk/samsung/Kconfig   |   7 +
>  drivers/clk/samsung/Makefile  |   1 +
>  drivers/clk/samsung/clk-fsd.c | 308 ++++++++++++++++++++++++++++++++++
>  drivers/clk/samsung/clk-pll.c |   1 +
>  drivers/clk/samsung/clk-pll.h |   1 +
>  5 files changed, 318 insertions(+)
>  create mode 100644 drivers/clk/samsung/clk-fsd.c
> 
> diff --git a/drivers/clk/samsung/Kconfig b/drivers/clk/samsung/Kconfig
> index 0e18d6ff2916..11587eb87fc4 100644
> --- a/drivers/clk/samsung/Kconfig
> +++ b/drivers/clk/samsung/Kconfig
> @@ -124,3 +124,10 @@ config S3C2443_COMMON_CLK
>  	help
>  	  Support for the clock controller present on the Samsung
>  	  S3C2416/S3C2443 SoCs. Choose Y here only if you build for this SoC.
> +
> +config TESLA_FSD_COMMON_CLK
> +	bool "Tesla FSD clock controller support" if COMPILE_TEST
> +	depends on COMMON_CLK_SAMSUNG
> +	help
> +	  Support for the clock controller present on the Tesla FSD SoC.
> +	  Choose Y here only if you build for this SoC.

The clock drivers Kconfig is organized in a way, that platform should
select only COMMON_CLK_SAMSUNG (first comment in a file), so let's keep
it consistent also for FSD. "select TESLA_FSD_COMMON_CLK if ARM64 &&
ARCH_TESLA_FSD" and skip the select in Kconfig.platform in following patch.


Best regards,
Krzysztof