[PATCH net-next v12 5/7] net: dt-bindings: dwmac: Convert mediatek-dwmac to DT schema
Biao Huang
biao.huang at mediatek.com
Sun Jan 16 23:07:04 PST 2022
Convert mediatek-dwmac to DT schema, and delete old mediatek-dwmac.txt.
And there are some changes in .yaml than .txt, others almost keep the same:
1. compatible "const: snps,dwmac-4.20".
2. delete "snps,reset-active-low;" in example, since driver remove this
property long ago.
3. add "snps,reset-delay-us = <0 10000 10000>" in example.
4. the example is for rgmii interface, keep related properties only.
Signed-off-by: Biao Huang <biao.huang at mediatek.com>
Reviewed-by: Rob Herring <robh at kernel.org>
---
.../bindings/net/mediatek-dwmac.txt | 91 ----------
.../bindings/net/mediatek-dwmac.yaml | 155 ++++++++++++++++++
2 files changed, 155 insertions(+), 91 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/mediatek-dwmac.txt
create mode 100644 Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.txt b/Documentation/devicetree/bindings/net/mediatek-dwmac.txt
deleted file mode 100644
index afbcaebf062e..000000000000
--- a/Documentation/devicetree/bindings/net/mediatek-dwmac.txt
+++ /dev/null
@@ -1,91 +0,0 @@
-MediaTek DWMAC glue layer controller
-
-This file documents platform glue layer for stmmac.
-Please see stmmac.txt for the other unchanged properties.
-
-The device node has following properties.
-
-Required properties:
-- compatible: Should be "mediatek,mt2712-gmac" for MT2712 SoC
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the MAC interrupts
-- interrupt-names: Should contain a list of interrupt names corresponding to
- the interrupts in the interrupts property, if available.
- Should be "macirq" for the main MAC IRQ
-- clocks: Must contain a phandle for each entry in clock-names.
-- clock-names: The name of the clock listed in the clocks property. These are
- "axi", "apb", "mac_main", "ptp_ref", "rmii_internal" for MT2712 SoC.
-- mac-address: See ethernet.txt in the same directory
-- phy-mode: See ethernet.txt in the same directory
-- mediatek,pericfg: A phandle to the syscon node that control ethernet
- interface and timing delay.
-
-Optional properties:
-- mediatek,tx-delay-ps: TX clock delay macro value. Default is 0.
- It should be defined for RGMII/MII interface.
- It should be defined for RMII interface when the reference clock is from MT2712 SoC.
-- mediatek,rx-delay-ps: RX clock delay macro value. Default is 0.
- It should be defined for RGMII/MII interface.
- It should be defined for RMII interface.
-Both delay properties need to be a multiple of 170 for RGMII interface,
-or will round down. Range 0~31*170.
-Both delay properties need to be a multiple of 550 for MII/RMII interface,
-or will round down. Range 0~31*550.
-
-- mediatek,rmii-rxc: boolean property, if present indicates that the RMII
- reference clock, which is from external PHYs, is connected to RXC pin
- on MT2712 SoC.
- Otherwise, is connected to TXC pin.
-- mediatek,rmii-clk-from-mac: boolean property, if present indicates that
- MT2712 SoC provides the RMII reference clock, which outputs to TXC pin only.
-- mediatek,txc-inverse: boolean property, if present indicates that
- 1. tx clock will be inversed in MII/RGMII case,
- 2. tx clock inside MAC will be inversed relative to reference clock
- which is from external PHYs in RMII case, and it rarely happen.
- 3. the reference clock, which outputs to TXC pin will be inversed in RMII case
- when the reference clock is from MT2712 SoC.
-- mediatek,rxc-inverse: boolean property, if present indicates that
- 1. rx clock will be inversed in MII/RGMII case.
- 2. reference clock will be inversed when arrived at MAC in RMII case, when
- the reference clock is from external PHYs.
- 3. the inside clock, which be sent to MAC, will be inversed in RMII case when
- the reference clock is from MT2712 SoC.
-- assigned-clocks: mac_main and ptp_ref clocks
-- assigned-clock-parents: parent clocks of the assigned clocks
-
-Example:
- eth: ethernet at 1101c000 {
- compatible = "mediatek,mt2712-gmac";
- reg = <0 0x1101c000 0 0x1300>;
- interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
- interrupt-names = "macirq";
- phy-mode ="rgmii-rxid";
- mac-address = [00 55 7b b5 7d f7];
- clock-names = "axi",
- "apb",
- "mac_main",
- "ptp_ref",
- "rmii_internal";
- clocks = <&pericfg CLK_PERI_GMAC>,
- <&pericfg CLK_PERI_GMAC_PCLK>,
- <&topckgen CLK_TOP_ETHER_125M_SEL>,
- <&topckgen CLK_TOP_ETHER_50M_SEL>,
- <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
- assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>,
- <&topckgen CLK_TOP_ETHER_50M_SEL>,
- <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
- assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>,
- <&topckgen CLK_TOP_APLL1_D3>,
- <&topckgen CLK_TOP_ETHERPLL_50M>;
- power-domains = <&scpsys MT2712_POWER_DOMAIN_AUDIO>;
- mediatek,pericfg = <&pericfg>;
- mediatek,tx-delay-ps = <1530>;
- mediatek,rx-delay-ps = <1530>;
- mediatek,rmii-rxc;
- mediatek,txc-inverse;
- mediatek,rxc-inverse;
- snps,txpbl = <1>;
- snps,rxpbl = <1>;
- snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- };
diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
new file mode 100644
index 000000000000..8ad6e19661b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mediatek-dwmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek DWMAC glue layer controller
+
+maintainers:
+ - Biao Huang <biao.huang at mediatek.com>
+
+description:
+ This file documents platform glue layer for stmmac.
+
+# We need a select here so we don't match all nodes with 'snps,dwmac'
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - mediatek,mt2712-gmac
+ required:
+ - compatible
+
+allOf:
+ - $ref: "snps,dwmac.yaml#"
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - mediatek,mt2712-gmac
+ - const: snps,dwmac-4.20a
+
+ clocks:
+ items:
+ - description: AXI clock
+ - description: APB clock
+ - description: MAC Main clock
+ - description: PTP clock
+ - description: RMII reference clock provided by MAC
+
+ clock-names:
+ items:
+ - const: axi
+ - const: apb
+ - const: mac_main
+ - const: ptp_ref
+ - const: rmii_internal
+
+ mediatek,pericfg:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ The phandle to the syscon node that control ethernet
+ interface and timing delay.
+
+ mediatek,tx-delay-ps:
+ description:
+ The internal TX clock delay (provided by this driver) in nanoseconds.
+ For MT2712 RGMII interface, Allowed value need to be a multiple of 170,
+ or will round down. Range 0~31*170.
+ For MT2712 RMII/MII interface, Allowed value need to be a multiple of 550,
+ or will round down. Range 0~31*550.
+
+ mediatek,rx-delay-ps:
+ description:
+ The internal RX clock delay (provided by this driver) in nanoseconds.
+ For MT2712 RGMII interface, Allowed value need to be a multiple of 170,
+ or will round down. Range 0~31*170.
+ For MT2712 RMII/MII interface, Allowed value need to be a multiple of 550,
+ or will round down. Range 0~31*550.
+
+ mediatek,rmii-rxc:
+ type: boolean
+ description:
+ If present, indicates that the RMII reference clock, which is from external
+ PHYs, is connected to RXC pin. Otherwise, is connected to TXC pin.
+
+ mediatek,rmii-clk-from-mac:
+ type: boolean
+ description:
+ If present, indicates that MAC provides the RMII reference clock, which
+ outputs to TXC pin only.
+
+ mediatek,txc-inverse:
+ type: boolean
+ description:
+ If present, indicates that
+ 1. tx clock will be inversed in MII/RGMII case,
+ 2. tx clock inside MAC will be inversed relative to reference clock
+ which is from external PHYs in RMII case, and it rarely happen.
+ 3. the reference clock, which outputs to TXC pin will be inversed in RMII case
+ when the reference clock is from MAC.
+
+ mediatek,rxc-inverse:
+ type: boolean
+ description:
+ If present, indicates that
+ 1. rx clock will be inversed in MII/RGMII case.
+ 2. reference clock will be inversed when arrived at MAC in RMII case, when
+ the reference clock is from external PHYs.
+ 3. the inside clock, which be sent to MAC, will be inversed in RMII case when
+ the reference clock is from MAC.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - clocks
+ - clock-names
+ - phy-mode
+ - mediatek,pericfg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt2712-clk.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/power/mt2712-power.h>
+
+ eth: ethernet at 1101c000 {
+ compatible = "mediatek,mt2712-gmac", "snps,dwmac-4.20a";
+ reg = <0x1101c000 0x1300>;
+ interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "macirq";
+ phy-mode ="rgmii-rxid";
+ mac-address = [00 55 7b b5 7d f7];
+ clock-names = "axi",
+ "apb",
+ "mac_main",
+ "ptp_ref",
+ "rmii_internal";
+ clocks = <&pericfg CLK_PERI_GMAC>,
+ <&pericfg CLK_PERI_GMAC_PCLK>,
+ <&topckgen CLK_TOP_ETHER_125M_SEL>,
+ <&topckgen CLK_TOP_ETHER_50M_SEL>,
+ <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
+ assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>,
+ <&topckgen CLK_TOP_ETHER_50M_SEL>,
+ <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>,
+ <&topckgen CLK_TOP_APLL1_D3>,
+ <&topckgen CLK_TOP_ETHERPLL_50M>;
+ power-domains = <&scpsys MT2712_POWER_DOMAIN_AUDIO>;
+ mediatek,pericfg = <&pericfg>;
+ mediatek,tx-delay-ps = <1530>;
+ snps,txpbl = <1>;
+ snps,rxpbl = <1>;
+ snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>;
+ snps,reset-delays-us = <0 10000 10000>;
+ };
--
2.25.1
More information about the linux-arm-kernel
mailing list