[PATCH v2 11/11] arm64: dts: freescale: add initial support for verdin imx8m mini

[Krzysztof Kozlowski]

On 14/01/2022 15:15, Marcel Ziswiler wrote:
> From: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> 
> This patch adds the device tree to support Toradex Verdin iMX8M Mini a
> computer on module which can be used on different carrier boards.
> 
> The module consists of an NXP i.MX 8M Mini family SoC (either i.MX 8M
> Mini Quad or 8M Mini DualLite), a PCA9450A PMIC, a Gigabit Ethernet PHY,
> 1 or 2 GB of LPDDR4 RAM, an eMMC, a TLA2024 ADC, an I2C EEPROM, an
> RX8130 RTC, an optional SPI CAN controller plus an optional Bluetooth/
> Wi-Fi module.
> 
> Anything that is not self-contained on the module is disabled by
> default.
> 
> The device tree for the Dahlia includes the module's device tree and
> enables the supported peripherals of the carrier board.
> 
> The device tree for the Verdin Development Board includes the module's
> device tree as well as the Dahlia one as it is a superset and supports
> almost all peripherals available.
> 
> So far there is no display functionality supported at all but basic
> console UART, USB host, eMMC and Ethernet and PCIe functionality work
> fine.
> 
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> 
> ---
> 
> Changes in v2:
> - Remove bootargs which will be filled in by the bootloader as requested
>   by Krzysztof.
> - Remove the previously #ifdefed-out spi-nor as requested by Krzysztof.
> - Fix capitalisation in cover-letter.
> 

Thanks for the changes.

Looks, good but I did not perform review thorough enough to give a
Reviewed-by tag, so let it be just:

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski at canonical.com>


Best regards,
Krzysztof