[PATCH v2 3/3] arm64: dts: meson-g12-common: add uart_ao_b pins muxing

Gary Bisson gary.bisson at boundarydevices.com
Wed Jan 12 13:16:42 PST 2022


- RX/TX signals can be mapped on 2 different pairs of pins so supporting
  both options
- RTS/CTS signals however only have 1 option available

Signed-off-by: Gary Bisson <gary.bisson at boundarydevices.com>
---
Changes v1->v2:
- renamed nodes as suggested by Neil

Cc: Rob Herring <robh+dt at kernel.org>
Cc: Neil Armstrong <narmstrong at baylibre.com>
Cc: Kevin Hilman <khilman at baylibre.com>
Cc: Jerome Brunet <jbrunet at baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
Cc: devicetree at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
---
 .../boot/dts/amlogic/meson-g12-common.dtsi    | 27 +++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index af1357c48bee..62350c408e16 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -1952,6 +1952,33 @@ mux {
 						};
 					};
 
+					uart_ao_b_2_3_pins: uart-ao-b-2-3 {
+						mux {
+							groups = "uart_ao_b_tx_2",
+								 "uart_ao_b_rx_3";
+							function = "uart_ao_b";
+							bias-disable;
+						};
+					};
+
+					uart_ao_b_8_9_pins: uart-ao-b-8-9 {
+						mux {
+							groups = "uart_ao_b_tx_8",
+								 "uart_ao_b_rx_9";
+							function = "uart_ao_b";
+							bias-disable;
+						};
+					};
+
+					uart_ao_b_cts_rts_pins: uart-ao-b-cts-rts {
+						mux {
+							groups = "uart_ao_b_cts",
+								 "uart_ao_b_rts";
+							function = "uart_ao_b";
+							bias-disable;
+						};
+					};
+
 					pwm_a_e_pins: pwm-a-e {
 						mux {
 							groups = "pwm_a_e";
-- 
2.34.1




More information about the linux-arm-kernel mailing list