[PATCH v2 09/11] dt-bindings: PCI: mvebu: Update information about intx interrupts

[Marek Behún]

On Wed, 12 Jan 2022 16:18:12 +0100
Pali Rohár <pali at kernel.org> wrote:

> Signed-off-by: Pali Rohár <pali at kernel.org>
> Acked-by: Rob Herring <robh at kernel.org>
> ---
>  Documentation/devicetree/bindings/pci/mvebu-pci.txt | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
> index 24225852bce0..6d022a9d36ee 100644
> --- a/Documentation/devicetree/bindings/pci/mvebu-pci.txt
> +++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
> @@ -81,6 +81,11 @@ and the following optional properties:
>  - reset-gpios: optional GPIO to PERST#
>  - reset-delay-us: delay in us to wait after reset de-assertion, if not
>    specified will default to 100ms, as required by the PCIe specification.
> +- interrupt-names: list of interrupt names, supported are:
> +   - "intx" - interrupt line triggered by one of the legacy interrupt
> +- interrupts or interrupts-extended: List of the interrupt sources which
> +  corresponding to the "interrupt-names". If non-empty then also additional
> +  'interrupt-controller' subnode must be defined.
>  
>  Example:
>  

Empty commit message. At least add something like this:

Document the following additional properties in the mvebu-pci DT
binding:
- interrupt-names
- interrupts / interrupts-extended


Marek