[PATCH 1/3] iio: adc: sun4i-gpadc-iio: no temp sensor on R40

[Evgeny Boger]

22.11.2021 15:41, Jonathan Cameron пишет:
> On Mon, 22 Nov 2021 10:11:32 +0100
> Maxime Ripard <maxime at cerno.tech> wrote:
>
>> On Fri, Nov 19, 2021 at 10:14:54PM +0300, Evgeny Boger wrote:
>>> R40 SoC has touchscreen controller also serving as general-purpose ADC.
>>> The hardware is very similar to A31, except that R40 has separate
>>> calibrated thermal sensor IP (handled by sun8i_thermal).
>>>
>>> Despite the temperature sensor in the RTP is never mentioned in
>>> the R40 family user manuals, it appears to be working. However,
>>> it's not very useful as it lacks calibration data and there is another
>>> fully functioning temperature sensor anyway.
>>>
>>> This patch disables the temperature sensor in RTP/GPADC IP on R40.
>>>
>>> The reason for disabling the temperature sensor is that the IP
>>> needs to be switched back and forth between RTP and GPADC modes for
>>> temperature measurements. Not only this introduces delays, but it also
>>> disturbs external circuitry by injecting current into ADC inputs.
>>>
>>> Signed-off-by: Evgeny Boger <boger at wirenboard.com>
>> Acked-by: Maxime Ripard <maxime at cerno.tech>
> +Cc linux-iio at vger.kernel.org
>
> I'm fine with this and assuming Lee is happy to pick it up + send
> me an immutable branch in case anything crosses with it this cycle..
>
> Acked-by: Jonathan Cameron <Jonathan.Cameron at huawei.com>

Hi Jonathan!

Is there anything else I should do to make this patch series accepted?


> Thanks,
>
> Jonathan
>
>> Maxime
>>