[PATCH] arm64: dts: imx8mm-venice-gw73xx-0x: add dt overlays for serial modes

[Lothar Waßmann]

Hi,

On Mon, 10 Jan 2022 16:00:21 -0800 Tim Harvey wrote:
> On Tue, Dec 14, 2021 at 1:36 PM Tim Harvey <tharvey at gateworks.com> wrote:
> >
[...]
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dts
> > new file mode 100644
> > index 000000000000..97f19c15c3d0
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dts
> > @@ -0,0 +1,61 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Copyright 2021 Gateworks Corporation
> > + *
> > + * GW73xx RS485 HD:
> > + *  - GPIO1_0 rs485_term selects on-chip termination
> > + *  - GPIO4_0 rs485_en needs to be driven high (active)
> > + *  - GPIO4_2 rs485_hd needs to be driven high (active)
> > + *  - UART4_TX is DE for RS485 transmitter
> > + *  - RS485_EN needs to be pulled high
> > + *  - RS485_HALF needs to be pulled high
> > + */
> > +
> > +#include <dt-bindings/gpio/gpio.h>
> > +
> > +#include "imx8mm-pinfunc.h"
> > +
> > +/dts-v1/;
> > +/plugin/;
> > +
> > +&{/} {
> > +       compatible = "gw,imx8mm-gw73xx-0x";
> > +};
> > +
> > +&gpio4 {
> > +       rs485_en {
> > +               gpio-hog;
> > +               gpios = <0 GPIO_ACTIVE_HIGH>;
> > +               output-high;
> > +               line-name = "rs485_en";
> > +       };
> > +
> > +       rs485_hd {
> > +               gpio-hog;
> > +               gpios = <2 GPIO_ACTIVE_HIGH>;
> > +               output-high;
> > +               line-name = "rs485_hd";
> > +       };
> > +};
> > +
> > +&uart2 {
> > +       pinctrl-names = "default";
> > +       pinctrl-0 = <&pinctrl_uart2>;
> > +       rts-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
> > +       linux,rs485-enabled-at-boot-time;
> > +       status = "okay";
> > +};
> > +
> > +&uart4 {
> > +       status = "disabled";
> > +};
> > +
> > +&iomuxc {
> > +       pinctrl_uart2: uast2grp {
>
s/uast/uart/


Lothar Waßmann

-- 
___________________________________________________________

Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Geschäftsführer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996

www.karo-electronics.de | info at karo-electronics.de
___________________________________________________________