[PATCH] dt-bindings: clock: imx5: Drop clock consumer node from example

[Rob Herring]

The example nodes have different sized interrupt cells which is not valid
given no interrupt-parent is specified. As provider examples don't need to
show the consumer side in the first place, just drop the consumer node.

Signed-off-by: Rob Herring <robh at kernel.org>
---
 Documentation/devicetree/bindings/clock/imx5-clock.yaml | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.yaml b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
index b1740d7abe68..c0e19ff92c76 100644
--- a/Documentation/devicetree/bindings/clock/imx5-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
@@ -55,11 +55,4 @@ examples:
                      <0 72 IRQ_TYPE_LEVEL_HIGH>;
         #clock-cells = <1>;
     };
-
-    can at 53fc8000 {
-        compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
-        reg = <0x53fc8000 0x4000>;
-        interrupts = <82>;
-        clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
-        clock-names = "ipg", "per";
-    };
+...
-- 
2.32.0