[PATCH v4 3/3] PCI: qcom: add support for IPQ60xx PCIe controller
Baruch Siach
baruch at tkos.co.il
Thu Jan 6 10:05:22 PST 2022
Hi Lorenzo,
On Thu, Jan 06 2022, Lorenzo Pieralisi wrote:
> [+Pali - query on reset delay]
>
> On Mon, Dec 27, 2021 at 08:46:05AM +0200, Baruch Siach wrote:
>> From: Selvam Sathappan Periakaruppan <speriaka at codeaurora.org>
>>
>> IPQ60xx series of SoCs have one port of PCIe gen 3. Add support for that
>> platform.
>>
>> The code is based on downstream[1] Codeaurora kernel v5.4 (branch
>> win.linuxopenwrt.2.0).
>>
>> Split out the DBI registers access part from .init into .post_init. DBI
>> registers are only accessible after phy_power_on().
>>
>> [1] https://source.codeaurora.org/quic/qsdk/oss/kernel/linux-ipq-5.4/
>>
>> Signed-off-by: Selvam Sathappan Periakaruppan <speriaka at codeaurora.org>
>> Signed-off-by: Baruch Siach <baruch.siach at siklu.com>
>> ---
>> v4:
>>
>> * Rebase on v5.16-rc1
>>
>> v3:
>> * Drop speed setup; rely on generic code (Rob Herring)
>>
>> * Drop unused CLK_RATE macros (Bjorn Helgaas)
>>
>> * Minor formatting fixes (Bjorn Helgaas)
>>
>> * Add reference to downstream Codeaurora kernel tree (Bjorn Helgaas)
>>
>> v2:
>> * Drop ATU configuration; rely on common code instead
>>
>> * Use more common register macros
>>
>> * Use bulk clk and reset APIs
>> ---
>> drivers/pci/controller/dwc/pcie-designware.h | 1 +
>> drivers/pci/controller/dwc/pcie-qcom.c | 145 +++++++++++++++++++
>> 2 files changed, 146 insertions(+)
>>
>> diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
>> index ea87809ee298..279c3778a13b 100644
>> --- a/drivers/pci/controller/dwc/pcie-designware.h
>> +++ b/drivers/pci/controller/dwc/pcie-designware.h
>> @@ -76,6 +76,7 @@
>>
>> #define GEN3_RELATED_OFF 0x890
>> #define GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL BIT(0)
>> +#define GEN3_RELATED_OFF_RXEQ_RGRDLESS_RXTS BIT(13)
>> #define GEN3_RELATED_OFF_GEN3_EQ_DISABLE BIT(16)
>> #define GEN3_RELATED_OFF_RATE_SHADOW_SEL_SHIFT 24
>> #define GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK GENMASK(25, 24)
>> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
>> index 1c3d1116bb60..14f86c45a8d9 100644
>> --- a/drivers/pci/controller/dwc/pcie-qcom.c
>> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
>> @@ -52,6 +52,10 @@
>> #define PCIE20_PARF_DBI_BASE_ADDR 0x168
>> #define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16C
>> #define PCIE20_PARF_MHI_CLOCK_RESET_CTRL 0x174
>> +#define AHB_CLK_EN BIT(0)
>> +#define MSTR_AXI_CLK_EN BIT(1)
>> +#define BYPASS BIT(4)
>> +
>> #define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT 0x178
>> #define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1A8
>> #define PCIE20_PARF_LTSSM 0x1B0
>> @@ -171,6 +175,11 @@ struct qcom_pcie_resources_2_7_0 {
>> struct clk *ref_clk_src;
>> };
>>
>> +struct qcom_pcie_resources_2_9_0 {
>> + struct clk_bulk_data clks[5];
>> + struct reset_control *rst;
>> +};
>> +
>> union qcom_pcie_resources {
>> struct qcom_pcie_resources_1_0_0 v1_0_0;
>> struct qcom_pcie_resources_2_1_0 v2_1_0;
>> @@ -178,6 +187,7 @@ union qcom_pcie_resources {
>> struct qcom_pcie_resources_2_3_3 v2_3_3;
>> struct qcom_pcie_resources_2_4_0 v2_4_0;
>> struct qcom_pcie_resources_2_7_0 v2_7_0;
>> + struct qcom_pcie_resources_2_9_0 v2_9_0;
>> };
>>
>> struct qcom_pcie;
>> @@ -1297,6 +1307,127 @@ static void qcom_pcie_post_deinit_2_7_0(struct qcom_pcie *pcie)
>> clk_disable_unprepare(res->pipe_clk);
>> }
>>
>> +static int qcom_pcie_get_resources_2_9_0(struct qcom_pcie *pcie)
>> +{
>> + struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0;
>> + struct dw_pcie *pci = pcie->pci;
>> + struct device *dev = pci->dev;
>> + int ret;
>> +
>> + res->clks[0].id = "iface";
>> + res->clks[1].id = "axi_m";
>> + res->clks[2].id = "axi_s";
>> + res->clks[3].id = "axi_bridge";
>> + res->clks[4].id = "rchng";
>> +
>> + ret = devm_clk_bulk_get(dev, ARRAY_SIZE(res->clks), res->clks);
>> + if (ret < 0)
>> + return ret;
>> +
>> + res->rst = devm_reset_control_array_get_exclusive(dev);
>> + if (IS_ERR(res->rst))
>> + return PTR_ERR(res->rst);
>> +
>> + return 0;
>> +}
>> +
>> +static void qcom_pcie_deinit_2_9_0(struct qcom_pcie *pcie)
>> +{
>> + struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0;
>> +
>> + clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks);
>> +}
>> +
>> +static int qcom_pcie_init_2_9_0(struct qcom_pcie *pcie)
>> +{
>> + struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0;
>> + struct device *dev = pcie->pci->dev;
>> + int ret;
>> +
>> + ret = reset_control_assert(res->rst);
>> + if (ret) {
>> + dev_err(dev, "reset assert failed (%d)\n", ret);
>> + return ret;
>> + }
>> +
>> + usleep_range(2000, 2500);
>> +
>> + ret = reset_control_deassert(res->rst);
>> + if (ret) {
>> + dev_err(dev, "reset deassert failed (%d)\n", ret);
>> + return ret;
>> + }
>> +
>> + /*
>> + * Don't have a way to see if the reset has completed.
>> + * Wait for some time.
>
> Is this arbitrary ? What does this reset represent ?
I have no idea. I'm just porting working downstream kernel code, and I
have no access to hardware documentation.
Note that some other variants also add delays before or after reset
deassert:
qcom_pcie_init_2_4_0()
qcom_pcie_init_2_3_3()
qcom_pcie_init_2_7_0()
baruch
>> + */
>> + usleep_range(2000, 2500);
>> +
>> + ret = clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks);
>> + if (ret)
>> + goto err_reset;
>> +
>> + return 0;
>> +
>> + /*
>> + * Not checking for failure, will anyway return
>> + * the original failure in 'ret'.
>> + */
>> +err_reset:
>> + reset_control_assert(res->rst);
>> +
>> + return ret;
>> +}
>> +
>> +static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie)
>> +{
>> + struct dw_pcie *pci = pcie->pci;
>> + u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
>> + u32 val;
>> + int i;
>> +
>> + writel(SLV_ADDR_SPACE_SZ,
>> + pcie->parf + PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE);
>> +
>> + val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
>> + val &= ~BIT(0);
>> + writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
>> +
>> + writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR);
>> +
>> + writel(DEVICE_TYPE_RC, pcie->parf + PCIE20_PARF_DEVICE_TYPE);
>> + writel(BYPASS | MSTR_AXI_CLK_EN | AHB_CLK_EN,
>> + pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL);
>> + writel(GEN3_RELATED_OFF_RXEQ_RGRDLESS_RXTS
>> + | GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL,
>> + pci->dbi_base + GEN3_RELATED_OFF);
>> +
>> + writel(MST_WAKEUP_EN | SLV_WAKEUP_EN | MSTR_ACLK_CGC_DIS
>> + | SLV_ACLK_CGC_DIS | CORE_CLK_CGC_DIS |
>> + AUX_PWR_DET | L23_CLK_RMV_DIS | L1_CLK_RMV_DIS,
>> + pcie->parf + PCIE20_PARF_SYS_CTRL);
>> +
>> + writel(0, pcie->parf + PCIE20_PARF_Q2A_FLUSH);
>> +
>> + dw_pcie_dbi_ro_wr_en(pci);
>> + writel(PCIE_CAP_LINK1_VAL, pci->dbi_base + offset + PCI_EXP_SLTCAP);
>> +
>> + /* Configure PCIe link capabilities for ASPM */
>> + val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP);
>> + val &= ~PCI_EXP_LNKCAP_ASPMS;
>> + writel(val, pci->dbi_base + offset + PCI_EXP_LNKCAP);
>> +
>> + writel(PCI_EXP_DEVCTL2_COMP_TMOUT_DIS, pci->dbi_base + offset +
>> + PCI_EXP_DEVCTL2);
>> +
>> + for (i = 0; i < 256; i++)
>> + writel(0x0, pcie->parf + PCIE20_PARF_BDF_TO_SID_TABLE_N
>> + + (4 * i));
>> +
>> + return 0;
>> +}
>> +
>> static int qcom_pcie_link_up(struct dw_pcie *pci)
>> {
>> u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
>> @@ -1487,6 +1618,15 @@ static const struct qcom_pcie_ops ops_1_9_0 = {
>> .config_sid = qcom_pcie_config_sid_sm8250,
>> };
>>
>> +/* Qcom IP rev.: 2.9.0 Synopsys IP rev.: 5.00a */
>> +static const struct qcom_pcie_ops ops_2_9_0 = {
>> + .get_resources = qcom_pcie_get_resources_2_9_0,
>> + .init = qcom_pcie_init_2_9_0,
>> + .post_init = qcom_pcie_post_init_2_9_0,
>> + .deinit = qcom_pcie_deinit_2_9_0,
>> + .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
>> +};
>> +
>> static const struct qcom_pcie_cfg apq8084_cfg = {
>> .ops = &ops_1_0_0,
>> };
>> @@ -1520,6 +1660,10 @@ static const struct qcom_pcie_cfg sc7280_cfg = {
>> .pipe_clk_need_muxing = true,
>> };
>>
>> +static const struct qcom_pcie_cfg ipq6018_cfg = {
>> + .ops = &ops_2_9_0,
>> +};
>> +
>> static const struct dw_pcie_ops dw_pcie_ops = {
>> .link_up = qcom_pcie_link_up,
>> .start_link = qcom_pcie_start_link,
>> @@ -1629,6 +1773,7 @@ static const struct of_device_id qcom_pcie_match[] = {
>> { .compatible = "qcom,pcie-sm8250", .data = &sm8250_cfg },
>> { .compatible = "qcom,pcie-sc8180x", .data = &sm8250_cfg },
>> { .compatible = "qcom,pcie-sc7280", .data = &sc7280_cfg },
>> + { .compatible = "qcom,pcie-ipq6018", .data = &ipq6018_cfg },
>> { }
>> };
>>
>> --
>> 2.34.1
>>
--
~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -
More information about the linux-arm-kernel
mailing list