[PATCH] i2c: meson: Fix wrong speed use from probe

Lucas Tanure tanure at linux.com
Mon Feb 28 23:26:00 PST 2022


Having meson_i2c_set_clk_div after i2c_add_adapter
causes issues for client drivers that try to use
the bus before the requested speed is applied.

The bus can be used just after i2c_add_adapter, so
move i2c_add_adapter to the final step as
meson_i2c_set_clk_div needs to be called before
the bus is used.

Signed-off-by: Lucas Tanure <tanure at linux.com>
---
 drivers/i2c/busses/i2c-meson.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c
index ef73a42577cc..07eb819072c4 100644
--- a/drivers/i2c/busses/i2c-meson.c
+++ b/drivers/i2c/busses/i2c-meson.c
@@ -465,18 +465,18 @@ static int meson_i2c_probe(struct platform_device *pdev)
 	 */
 	meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_START, 0);
 
-	ret = i2c_add_adapter(&i2c->adap);
-	if (ret < 0) {
-		clk_disable_unprepare(i2c->clk);
-		return ret;
-	}
-
 	/* Disable filtering */
 	meson_i2c_set_mask(i2c, REG_SLAVE_ADDR,
 			   REG_SLV_SDA_FILTER | REG_SLV_SCL_FILTER, 0);
 
 	meson_i2c_set_clk_div(i2c, timings.bus_freq_hz);
 
+	ret = i2c_add_adapter(&i2c->adap);
+	if (ret < 0) {
+		clk_disable_unprepare(i2c->clk);
+		return ret;
+	}
+
 	return 0;
 }
 
-- 
2.35.1




More information about the linux-arm-kernel mailing list