[PATCH v3 5/7] arm64: dts: imx8mp: add HSIO power-domains

[Lucas Stach]

This adds the GPC and HSIO blk-ctrl nodes providing power control for
the high-speed (USB and PCIe) IOs.

Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
 arch/arm64/boot/dts/freescale/imx8mp.dtsi | 71 +++++++++++++++++++++--
 1 file changed, 65 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 6b840c05dd77..69e533add539 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/clock/imx8mp-clock.h>
+#include <dt-bindings/power/imx8mp-power.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -475,6 +476,44 @@ src: reset-controller at 30390000 {
 				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 				#reset-cells = <1>;
 			};
+
+			gpc: gpc at 303a0000 {
+				compatible = "fsl,imx8mp-gpc";
+				reg = <0x303a0000 0x1000>;
+				interrupt-parent = <&gic>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pgc_pcie_phy: power-domain at 1 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_PCIE_PHY>;
+					};
+
+					pgc_usb1_phy: power-domain at 2 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_USB1_PHY>;
+					};
+
+					pgc_usb2_phy: power-domain at 3 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_USB2_PHY>;
+					};
+
+					pgc_hsiomix: power-domains at 17 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_HSIOMIX>;
+						clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
+							 <&clk IMX8MP_CLK_HSIO_ROOT>;
+						assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
+						assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
+						assigned-clock-rates = <500000000>;
+					};
+				};
+			};
 		};
 
 		aips2: bus at 30400000 {
@@ -892,6 +931,28 @@ eqos: ethernet at 30bf0000 {
 			};
 		};
 
+		aips4 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x32c00000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			hsio_blk_ctrl: blk-ctrl at 32f10000 {
+				compatible = "fsl,imx8mp-hsio-blk-ctrl", "syscon";
+				reg = <0x32f10000 0x24>;
+				clocks = <&clk IMX8MP_CLK_USB_ROOT>,
+					 <&clk IMX8MP_CLK_PCIE_ROOT>;
+				clock-names = "usb", "pcie";
+				power-domains = <&pgc_hsiomix>, <&pgc_hsiomix>,
+						<&pgc_usb1_phy>, <&pgc_usb2_phy>,
+						<&pgc_hsiomix>, <&pgc_pcie_phy>;
+				power-domain-names = "bus", "usb", "usb-phy1",
+						     "usb-phy2", "pcie", "pcie-phy";
+				#power-domain-cells = <1>;
+			};
+		};
+
 		gic: interrupt-controller at 38800000 {
 			compatible = "arm,gic-v3";
 			reg = <0x38800000 0x10000>,
@@ -915,6 +976,7 @@ usb3_phy0: usb-phy at 381f0040 {
 			clock-names = "phy";
 			assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>;
 			assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB_PHY1>;
 			#phy-cells = <0>;
 			status = "disabled";
 		};
@@ -926,6 +988,7 @@ usb3_0: usb at 32f10100 {
 				 <&clk IMX8MP_CLK_USB_ROOT>;
 			clock-names = "hsio", "suspend";
 			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			dma-ranges = <0x40000000 0x40000000 0xc0000000>;
@@ -939,9 +1002,6 @@ usb_dwc3_0: usb at 38100000 {
 					 <&clk IMX8MP_CLK_USB_CORE_REF>,
 					 <&clk IMX8MP_CLK_USB_ROOT>;
 				clock-names = "bus_early", "ref", "suspend";
-				assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
-				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
-				assigned-clock-rates = <500000000>;
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usb3_phy0>, <&usb3_phy0>;
 				phy-names = "usb2-phy", "usb3-phy";
@@ -957,6 +1017,7 @@ usb3_phy1: usb-phy at 382f0040 {
 			clock-names = "phy";
 			assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>;
 			assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB_PHY2>;
 			#phy-cells = <0>;
 		};
 
@@ -967,6 +1028,7 @@ usb3_1: usb at 32f10108 {
 				 <&clk IMX8MP_CLK_USB_ROOT>;
 			clock-names = "hsio", "suspend";
 			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			dma-ranges = <0x40000000 0x40000000 0xc0000000>;
@@ -980,9 +1042,6 @@ usb_dwc3_1: usb at 38200000 {
 					 <&clk IMX8MP_CLK_USB_CORE_REF>,
 					 <&clk IMX8MP_CLK_USB_ROOT>;
 				clock-names = "bus_early", "ref", "suspend";
-				assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
-				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
-				assigned-clock-rates = <500000000>;
 				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usb3_phy1>, <&usb3_phy1>;
 				phy-names = "usb2-phy", "usb3-phy";
-- 
2.30.2