[PATCH V3] tty: serial: meson: Fix the compile link error reported by kernel test robot

[Yu Tu]

Hi,

On 2022/2/28 22:13, Neil Armstrong wrote:
> [ EXTERNAL EMAIL ]
> 
> Hi,
> 
> On 28/02/2022 14:55, Yu Tu wrote:
>> Describes the calculation of the UART baud rate clock using a clock
>> frame. Forgot to add in Kconfig kernel test Robot compilation error
>> due to COMMON_CLK dependency.
>>
>> Fixes: ("tty: serial:meson: Describes the calculation of the UART baud 
>> rate clock using a clock frame“)
> 
> As I already replied on V2 of this patch, you're invited to apply these 
> fixes directly
> on the next version of your "Use CCF to describe the UART baud rate 
> clock" patchset
> and not as a separate patch.
> 
Sorry, I don't understand what you mean. Could you be more specific?
> Thanks,
> Neil
> 
>> Reported-by: kernel test robot <lkp at intel.com>
>> Reported-by: Dan Carpenter <dan.carpenter at oracle.com>
>> Signed-off-by: Yu Tu <yu.tu at amlogic.com>
>> ---
>>   drivers/tty/serial/Kconfig      |  1 +
>>   drivers/tty/serial/meson_uart.c | 37 +++++++++++++++++++++++----------
>>   2 files changed, 27 insertions(+), 11 deletions(-)
>>
>> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
>> index e952ec5c7a7c..a0f2b82fc18b 100644
>> --- a/drivers/tty/serial/Kconfig
>> +++ b/drivers/tty/serial/Kconfig
>> @@ -200,6 +200,7 @@ config SERIAL_KGDB_NMI
>>   config SERIAL_MESON
>>       tristate "Meson serial port support"
>>       depends on ARCH_MESON || COMPILE_TEST
>> +    depends on COMMON_CLK
>>       select SERIAL_CORE
>>       help
>>         This enables the driver for the on-chip UARTs of the Amlogic
>> diff --git a/drivers/tty/serial/meson_uart.c 
>> b/drivers/tty/serial/meson_uart.c
>> index bf6be5468aaf..972f210f3492 100644
>> --- a/drivers/tty/serial/meson_uart.c
>> +++ b/drivers/tty/serial/meson_uart.c
>> @@ -780,28 +780,37 @@ static int meson_uart_probe(struct 
>> platform_device *pdev)
>>           return ret;
>>       irq = platform_get_irq(pdev, 0);
>> -    if (irq < 0)
>> -        return irq;
>> +    if (irq < 0) {
>> +        ret = irq;
>> +        goto err_out_clk_disable;
>> +    }
>>       of_property_read_u32(pdev->dev.of_node, "fifo-size", &fifosize);
>>       if (meson_ports[pdev->id]) {
>>           dev_err(&pdev->dev, "port %d already allocated\n", pdev->id);
>> -        return -EBUSY;
>> +        ret = -EBUSY;
>> +        goto err_out_clk_disable;
>>       }
>>       port = devm_kzalloc(&pdev->dev, sizeof(struct uart_port), 
>> GFP_KERNEL);
>> -    if (!port)
>> -        return -ENOMEM;
>> +    if (!port) {
>> +        ret = -ENOMEM;
>> +        goto err_out_clk_disable;
>> +    }
>>       port->membase = devm_ioremap_resource(&pdev->dev, res_mem);
>> -    if (IS_ERR(port->membase))
>> -        return PTR_ERR(port->membase);
>> +    if (IS_ERR(port->membase)) {
>> +        ret = PTR_ERR(port->membase);
>> +        goto err_out_clk_disable;
>> +    }
>>       private_data = devm_kzalloc(&pdev->dev, sizeof(*private_data),
>>                       GFP_KERNEL);
>> -    if (!private_data)
>> -        return -ENOMEM;
>> +    if (!private_data) {
>> +        ret = -ENOMEM;
>> +        goto err_out_clk_disable;
>> +    }
>>       if (device_get_match_data(&pdev->dev))
>>           private_data->use_xtal_clk = true;
>> @@ -822,7 +831,7 @@ static int meson_uart_probe(struct platform_device 
>> *pdev)
>>       ret = meson_uart_probe_clocks(port);
>>       if (ret)
>> -        return ret;
>> +        goto err_out_clk_disable;
>>       meson_ports[pdev->id] = port;
>>       platform_set_drvdata(pdev, port);
>> @@ -831,9 +840,15 @@ static int meson_uart_probe(struct 
>> platform_device *pdev)
>>       meson_uart_reset(port);
>>       ret = uart_add_one_port(&meson_uart_driver, port);
>> -    if (ret)
>> +    if (ret) {
>>           meson_ports[pdev->id] = NULL;
>> +        goto err_out_clk_disable;
>> +    }
>> +
>> +    return 0;
>> +err_out_clk_disable:
>> +    clk_disable_unprepare(pclk);
>>       return ret;
>>   }
>>
>> base-commit: c2faf737abfb10f88f2d2612d573e9edc3c42c37
>