[PATCH v3 3/3] arm64: dts: rockchip: Add sata nodes to rk356x

[Krzysztof Kozlowski]

On 27/02/2022 19:28, Frank Wunderlich wrote:
> From: Frank Wunderlich <frank-w at public-files.de>
> 
> RK356x supports up to 3 sata controllers which were compatible with the
> existing snps,dwc-ahci binding.
> 
> Signed-off-by: Frank Wunderlich <frank-w at public-files.de>
> ---
> changes in v3:
>   - fix combphy error by moving sata0 to rk3568.dtsi
>   - remove clock-names and interrupt-names
> changes in v2:
>   - added sata0 + 1, but have only tested sata2
> ---
>  arch/arm64/boot/dts/rockchip/rk3568.dtsi | 14 +++++++++++++
>  arch/arm64/boot/dts/rockchip/rk356x.dtsi | 26 ++++++++++++++++++++++++
>  2 files changed, 40 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
> index 5b0f528d6818..2a2f65899d47 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
> @@ -8,6 +8,19 @@
>  / {
>  	compatible = "rockchip,rk3568";
>  
> +	sata0: sata at fc000000 {
> +		compatible = "snps,dwc-ahci";
> +		reg = <0 0xfc000000 0 0x1000>;
> +		clocks = <&cru ACLK_SATA0>, <&cru CLK_SATA0_PMALIVE>,
> +			 <&cru CLK_SATA0_RXOOB>;
> +		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
> +		phys = <&combphy0 PHY_TYPE_SATA>;
> +		phy-names = "sata-phy";
> +		ports-implemented = <0x1>;
> +		power-domains = <&power RK3568_PD_PIPE>;
> +		status = "disabled";
> +	};
> +
>  	pipe_phy_grf0: syscon at fdc70000 {
>  		compatible = "rockchip,rk3568-pipe-phy-grf", "syscon";
>  		reg = <0x0 0xfdc70000 0x0 0x1000>;
> @@ -114,3 +127,4 @@ power-domain at RK3568_PD_PIPE {
>  		#power-domain-cells = <0>;
>  	};
>  };
> +

No need for new line here,

> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> index 7cdef800cb3c..484c5ace718a 100644
> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> @@ -230,6 +230,32 @@ scmi_shmem: sram at 0 {
>  		};
>  	};
>  
> +	sata1: sata at fc400000 {
> +		compatible = "snps,dwc-ahci";
> +		reg = <0 0xfc400000 0 0x1000>;
> +		clocks = <&cru ACLK_SATA1>, <&cru CLK_SATA1_PMALIVE>,
> +			 <&cru CLK_SATA1_RXOOB>;

clock-names should be added. Also to bindings.


Best regards,
Krzysztof