[PATCH v6 2/4] dt-bindings: input: Add Cypress TT2100 touchscreen controller

[Rob Herring]

On Sun, 27 Feb 2022 22:33:16 +1000, Alistair Francis wrote:
> Add the Cypress TrueTouch Generation 5 touchscreen device tree bindings
> documentation. It can use I2C or SPI bus.
> This touchscreen can handle some defined zone that are designed and
> sent as button. To be able to customize the keycode sent, the
> "linux,code" property in a "button" sub-node can be used.
> 
> Signed-off-by: Alistair Francis <alistair at alistair23.me>
> Reviewed-by: Linus Walleij <linus.walleij at linaro.org>
> ---
>  .../input/touchscreen/cypress,tt21000.yaml    | 98 +++++++++++++++++++
>  1 file changed, 98 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.example.dts:38.21-31: Warning (reg_format): /example-0/i2c/touchscreen at 24/button at 0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.example.dts:43.21-31: Warning (reg_format): /example-0/i2c/touchscreen at 24/button at 1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.example.dts:48.21-31: Warning (reg_format): /example-0/i2c/touchscreen at 24/button at 2:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.example.dts:37.26-40.19: Warning (avoid_default_addr_size): /example-0/i2c/touchscreen at 24/button at 0: Relying on default #address-cells value
Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.example.dts:37.26-40.19: Warning (avoid_default_addr_size): /example-0/i2c/touchscreen at 24/button at 0: Relying on default #size-cells value
Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.example.dts:42.26-45.19: Warning (avoid_default_addr_size): /example-0/i2c/touchscreen at 24/button at 1: Relying on default #address-cells value
Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.example.dts:42.26-45.19: Warning (avoid_default_addr_size): /example-0/i2c/touchscreen at 24/button at 1: Relying on default #size-cells value
Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.example.dts:47.26-50.19: Warning (avoid_default_addr_size): /example-0/i2c/touchscreen at 24/button at 2: Relying on default #address-cells value
Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.example.dts:47.26-50.19: Warning (avoid_default_addr_size): /example-0/i2c/touchscreen at 24/button at 2: Relying on default #size-cells value
Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.example.dt.yaml: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size'

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1598249

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.