[PATCH v1 10/11] spi: pxa2xx-pci: Drop temporary storage use for a handful of members
Andy Shevchenko
andriy.shevchenko at linux.intel.com
Fri Feb 25 09:23:49 PST 2022
Instead of using temporary storage, assign the values directly
to the corresponding struct pxa2xx_spi_controller members.
Signed-off-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
---
drivers/spi/spi-pxa2xx-pci.c | 110 ++++++++++++++++-------------------
1 file changed, 49 insertions(+), 61 deletions(-)
diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c
index 2dbe08034ad0..3c5d14affa95 100644
--- a/drivers/spi/spi-pxa2xx-pci.c
+++ b/drivers/spi/spi-pxa2xx-pci.c
@@ -28,19 +28,7 @@
#define PCI_DEVICE_ID_INTEL_LPT1_1 0x9ce6
struct pxa_spi_info {
- enum pxa_ssp_type type;
- unsigned int port_id;
- unsigned int num_chipselect;
- unsigned long max_clk_rate;
-
- /* DMA channel request parameters */
- bool (*dma_filter)(struct dma_chan *chan, void *param);
- void *tx_param;
- void *rx_param;
-
- unsigned int dma_burst_size;
-
- int (*setup)(struct pci_dev *pdev, struct pxa_spi_info *c);
+ int (*setup)(struct pci_dev *pdev, struct pxa2xx_spi_controller *c);
};
static struct dw_dma_slave byt_tx_param = { .dst_id = 0 };
@@ -99,48 +87,49 @@ static void lpss_dma_put_device(void *dma_dev)
pci_dev_put(dma_dev);
}
-static int lpss_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
+static int lpss_spi_setup(struct pci_dev *dev, struct pxa2xx_spi_controller *c)
{
+ struct ssp_device *ssp = &c->ssp;
struct dw_dma_slave *tx, *rx;
struct pci_dev *dma_dev;
int ret;
switch (dev->device) {
case PCI_DEVICE_ID_INTEL_BYT:
- c->type = LPSS_BYT_SSP;
- c->port_id = 0;
+ ssp->type = LPSS_BYT_SSP;
+ ssp->port_id = 0;
c->tx_param = &byt_tx_param;
c->rx_param = &byt_rx_param;
break;
case PCI_DEVICE_ID_INTEL_BSW0:
- c->type = LPSS_BSW_SSP;
- c->port_id = 0;
+ ssp->type = LPSS_BSW_SSP;
+ ssp->port_id = 0;
c->tx_param = &bsw0_tx_param;
c->rx_param = &bsw0_rx_param;
break;
case PCI_DEVICE_ID_INTEL_BSW1:
- c->type = LPSS_BSW_SSP;
- c->port_id = 1;
+ ssp->type = LPSS_BSW_SSP;
+ ssp->port_id = 1;
c->tx_param = &bsw1_tx_param;
c->rx_param = &bsw1_rx_param;
break;
case PCI_DEVICE_ID_INTEL_BSW2:
- c->type = LPSS_BSW_SSP;
- c->port_id = 2;
+ ssp->type = LPSS_BSW_SSP;
+ ssp->port_id = 2;
c->tx_param = &bsw2_tx_param;
c->rx_param = &bsw2_rx_param;
break;
case PCI_DEVICE_ID_INTEL_LPT0_0:
case PCI_DEVICE_ID_INTEL_LPT1_0:
- c->type = LPSS_LPT_SSP;
- c->port_id = 0;
+ ssp->type = LPSS_LPT_SSP;
+ ssp->port_id = 0;
c->tx_param = &lpt0_tx_param;
c->rx_param = &lpt0_rx_param;
break;
case PCI_DEVICE_ID_INTEL_LPT0_1:
case PCI_DEVICE_ID_INTEL_LPT1_1:
- c->type = LPSS_LPT_SSP;
- c->port_id = 1;
+ ssp->type = LPSS_LPT_SSP;
+ ssp->port_id = 1;
c->tx_param = &lpt1_tx_param;
c->rx_param = &lpt1_rx_param;
break;
@@ -149,7 +138,10 @@ static int lpss_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
}
c->num_chipselect = 1;
- c->max_clk_rate = 50000000;
+
+ ret = pxa2xx_spi_pci_clk_register(dev, ssp, 50000000);
+ if (ret)
+ return ret;
dma_dev = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
ret = devm_add_action_or_reset(&dev->dev, lpss_dma_put_device, dma_dev);
@@ -168,6 +160,7 @@ static int lpss_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
c->dma_filter = lpss_dma_filter;
c->dma_burst_size = 1;
+ c->enable_dma = 1;
return 0;
}
@@ -175,41 +168,45 @@ static struct pxa_spi_info lpss_info_config = {
.setup = lpss_spi_setup,
};
-static int ce4100_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
+static int ce4100_spi_setup(struct pci_dev *dev, struct pxa2xx_spi_controller *c)
{
- c->type = PXA25x_SSP;
- c->port_id = dev->devfn;
+ struct ssp_device *ssp = &c->ssp;
+
+ ssp->type = PXA25x_SSP;
+ ssp->port_id = dev->devfn;
c->num_chipselect = dev->devfn;
- c->max_clk_rate = 3686400;
- return 0;
+ return pxa2xx_spi_pci_clk_register(dev, ssp, 3686400);
}
static struct pxa_spi_info ce4100_info_config = {
.setup = ce4100_spi_setup,
};
-static int mrfld_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
+static int mrfld_spi_setup(struct pci_dev *dev, struct pxa2xx_spi_controller *c)
{
+ struct ssp_device *ssp = &c->ssp;
struct dw_dma_slave *tx, *rx;
struct pci_dev *dma_dev;
int ret;
+ ssp->type = MRFLD_SSP;
+
switch (PCI_FUNC(dev->devfn)) {
case 0:
- c->port_id = 3;
+ ssp->port_id = 3;
c->num_chipselect = 1;
c->tx_param = &mrfld3_tx_param;
c->rx_param = &mrfld3_rx_param;
break;
case 1:
- c->port_id = 5;
+ ssp->port_id = 5;
c->num_chipselect = 4;
c->tx_param = &mrfld5_tx_param;
c->rx_param = &mrfld5_rx_param;
break;
case 2:
- c->port_id = 6;
+ ssp->port_id = 6;
c->num_chipselect = 1;
c->tx_param = &mrfld6_tx_param;
c->rx_param = &mrfld6_rx_param;
@@ -218,8 +215,9 @@ static int mrfld_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
return -ENODEV;
}
- c->type = MRFLD_SSP;
- c->max_clk_rate = 25000000;
+ ret = pxa2xx_spi_pci_clk_register(dev, ssp, 25000000);
+ if (ret)
+ return ret;
dma_dev = pci_get_slot(dev->bus, PCI_DEVFN(21, 0));
ret = devm_add_action_or_reset(&dev->dev, lpss_dma_put_device, dma_dev);
@@ -234,6 +232,7 @@ static int mrfld_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
c->dma_filter = lpss_dma_filter;
c->dma_burst_size = 8;
+ c->enable_dma = 1;
return 0;
}
@@ -241,14 +240,15 @@ static struct pxa_spi_info mrfld_info_config = {
.setup = mrfld_spi_setup,
};
-static int qrk_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
+static int qrk_spi_setup(struct pci_dev *dev, struct pxa2xx_spi_controller *c)
{
- c->type = QUARK_X1000_SSP;
- c->port_id = dev->devfn;
+ struct ssp_device *ssp = &c->ssp;
+
+ ssp->type = QUARK_X1000_SSP;
+ ssp->port_id = dev->devfn;
c->num_chipselect = 1;
- c->max_clk_rate = 50000000;
- return 0;
+ return pxa2xx_spi_pci_clk_register(dev, ssp, 50000000);
}
static struct pxa_spi_info qrk_info_config = {
@@ -262,8 +262,8 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev,
int ret;
struct platform_device *pdev;
struct pxa2xx_spi_controller spi_pdata;
+ struct pxa_spi_info *info;
struct ssp_device *ssp;
- struct pxa_spi_info *c;
ret = pcim_enable_device(dev);
if (ret)
@@ -273,25 +273,17 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev,
if (ret)
return ret;
- c = (struct pxa_spi_info *)ent->driver_data;
- ret = c->setup(dev, c);
- if (ret)
- return ret;
-
memset(&spi_pdata, 0, sizeof(spi_pdata));
- spi_pdata.num_chipselect = c->num_chipselect;
- spi_pdata.dma_filter = c->dma_filter;
- spi_pdata.tx_param = c->tx_param;
- spi_pdata.rx_param = c->rx_param;
- spi_pdata.enable_dma = c->rx_param && c->tx_param;
- spi_pdata.dma_burst_size = c->dma_burst_size;
ssp = &spi_pdata.ssp;
ssp->dev = &dev->dev;
ssp->phys_base = pci_resource_start(dev, 0);
ssp->mmio_base = pcim_iomap_table(dev)[0];
- ssp->type = c->type;
- ssp->port_id = c->port_id;
+
+ info = (struct pxa_spi_info *)ent->driver_data;
+ ret = info->setup(dev, &spi_pdata);
+ if (ret)
+ return ret;
pci_set_master(dev);
@@ -300,10 +292,6 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev,
return ret;
ssp->irq = pci_irq_vector(dev, 0);
- ret = pxa2xx_spi_pci_clk_register(dev, ssp, c->max_clk_rate);
- if (ret)
- return ret;
-
memset(&pi, 0, sizeof(pi));
pi.fwnode = dev_fwnode(&dev->dev);
pi.parent = &dev->dev;
--
2.34.1
More information about the linux-arm-kernel
mailing list