[PATCH 1/2] dt-bindings: pinctrl: imx93: Add pinctrl binding

[Rob Herring]

On Tue, Feb 15, 2022 at 04:20:05PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan at nxp.com>
> 
> Add pinctrl binding doc for i.MX93
> 
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> ---
>  .../bindings/pinctrl/fsl,imx93-pinctrl.yaml   | 85 +++++++++++++++++++
>  1 file changed, 85 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml
> new file mode 100644
> index 000000000000..95c87ea4c5c8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml
> @@ -0,0 +1,85 @@
> +# SPDX-License-Identifier: GPL-2.0

Dual license. checkpatch will tell you this and which ones.

> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/fsl,imx93-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale IMX93 IOMUX Controller
> +
> +maintainers:
> +  - Peng Fan <peng.fan at nxp.com>
> +
> +description:
> +  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
> +  for common binding part and usage.
> +
> +properties:
> +  compatible:
> +    const: fsl,imx93-iomuxc
> +
> +  reg:
> +    maxItems: 1
> +
> +# Client device subnode's properties
> +patternProperties:
> +  'grp$':
> +    type: object
> +    description:
> +      Pinctrl node's client devices use subnodes for desired pin configuration.
> +      Client device subnodes use below standard properties.
> +
> +    properties:
> +      fsl,pins:
> +        description:
> +          each entry consists of 6 integers and represents the mux and config
> +          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
> +          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
> +          be found in <arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h>. The last
> +          integer CONFIG is the pad setting value like pull-up on this pin. Please
> +          refer to i.MX8M Plus Reference Manual for detailed CONFIG settings.
> +        $ref: /schemas/types.yaml#/definitions/uint32-matrix
> +        items:
> +          items:
> +            - description: |
> +                "mux_reg" indicates the offset of mux register.
> +            - description: |
> +                "conf_reg" indicates the offset of pad configuration register.
> +            - description: |
> +                "input_reg" indicates the offset of select input register.
> +            - description: |
> +                "mux_val" indicates the mux value to be applied.
> +            - description: |
> +                "input_val" indicates the select input value to be applied.
> +            - description: |
> +                "pad_setting" indicates the pad configuration value to be applied.
> +
> +
> +    required:
> +      - fsl,pins
> +
> +    additionalProperties: false
> +
> +allOf:
> +  - $ref: "pinctrl.yaml#"

Move this above 'properties'

> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  # Pinmux controller node
> +  - |
> +    iomuxc: pinctrl at 443c0000 {
> +        compatible = "fsl,imx93-iomuxc";
> +        reg = <0x30330000 0x10000>;
> +
> +        pinctrl_uart3: uart3grp {
> +            fsl,pins =
> +                <0x48 0x1f8 0x41c 0x1 0x0	0x49>,
> +                <0x4c 0x1fc 0x418 0x1 0x0	0x49>;
> +        };
> +    };
> +
> +...
> -- 
> 2.25.1
> 
>