[PATCH v1 3/8] soc: rockchip: set dwc3 clock for rk3566

Peter Geis pgwipeout at gmail.com
Fri Feb 25 06:54:26 PST 2022


The rk3566 dwc3 otg port clock is unavailable at boot, as it defaults to
the combophy as the clock source. As combophy0 doesn't exist on rk3566,
we need to set the clock source to the usb2 phy instead.

Add handling to the grf driver to handle this on boot.

Signed-off-by: Peter Geis <pgwipeout at gmail.com>
---
 drivers/soc/rockchip/grf.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/soc/rockchip/grf.c b/drivers/soc/rockchip/grf.c
index 494cf2b5bf7b..384461b70684 100644
--- a/drivers/soc/rockchip/grf.c
+++ b/drivers/soc/rockchip/grf.c
@@ -108,6 +108,20 @@ static const struct rockchip_grf_info rk3399_grf __initconst = {
 	.num_values = ARRAY_SIZE(rk3399_defaults),
 };
 
+#define RK3566_GRF_USB3OTG0_CON1	0x0104
+
+static const struct rockchip_grf_value rk3566_defaults[] __initconst = {
+	{ "usb3otg port switch", RK3566_GRF_USB3OTG0_CON1, HIWORD_UPDATE(0, 1, 12) },
+	{ "usb3otg clock switch", RK3566_GRF_USB3OTG0_CON1, HIWORD_UPDATE(1, 1, 7) },
+	{ "usb3otg disable usb3", RK3566_GRF_USB3OTG0_CON1, HIWORD_UPDATE(1, 1, 0) },
+};
+
+static const struct rockchip_grf_info rk3566_pipegrf __initconst = {
+	.values = rk3566_defaults,
+	.num_values = ARRAY_SIZE(rk3566_defaults),
+};
+
+
 static const struct of_device_id rockchip_grf_dt_match[] __initconst = {
 	{
 		.compatible = "rockchip,rk3036-grf",
@@ -130,6 +144,9 @@ static const struct of_device_id rockchip_grf_dt_match[] __initconst = {
 	}, {
 		.compatible = "rockchip,rk3399-grf",
 		.data = (void *)&rk3399_grf,
+	}, {
+		.compatible = "rockchip,rk3566-pipe-grf",
+		.data = (void *)&rk3566_pipegrf,
 	},
 	{ /* sentinel */ },
 };
-- 
2.25.1




More information about the linux-arm-kernel mailing list