[PATCH v2 00/10] ARM: at91: add cpu idle and cpufreq opps for sama7g5

[Nicolas Ferre]

On 13/01/2022 at 15:48, Claudiu Beznea wrote:
> 
> Hi,
> 
> This series adds CPU idle support for SAMA7G5. Along with this the
> CPUFreq OPPs for SAMA7G5 and proper config has been added.
> 
> Thank you,
> Claudiu Beznea

For whole series:
Acked-by: Nicolas Ferre <nicolas.ferre at microchip.com>

Patches queued in at91 tree for 5.18 (via arm-soc):
- 1-5 in at91-soc
- 6-8 in at91-dt
- 9, 10 in at91-defconfig

Best regards,
    Nicolas

> Changes in v2:
> - collected tags
> - add "opp-suspend" to 600MHz OPP on patch "ARM: dts: at91: sama7g5: add opps"
> - add patches:
> 	ARM: dts: at91: fix low limit for CPU regulator
> 	ARM: dts: at91: sama7g5ek: set regulator voltages for standby state
> 
> Claudiu Beznea (10):
>    ARM: at91: ddr: remove CONFIG_SOC_SAMA7 dependency
>    ARM: at91: ddr: align macro definitions
>    ARM: at91: ddr: fix typo to align with datasheet naming
>    ARM: at91: PM: add cpu idle support for sama7g5
>    ARM: at91: Kconfig: select PM_OPP
>    ARM: dts: at91: fix low limit for CPU regulator
>    ARM: dts: at91: sama7g5ek: set regulator voltages for standby state
>    ARM: dts: at91: sama7g5: add opps
>    ARM: configs: at91: sama7: enable cpu idle
>    ARM: configs: at91: sama7: add config for cpufreq
> 
>   arch/arm/boot/dts/at91-sama7g5ek.dts |  7 ++++-
>   arch/arm/boot/dts/sama7g5.dtsi       | 38 ++++++++++++++++++++++++++++
>   arch/arm/configs/sama7_defconfig     |  9 ++++++-
>   arch/arm/mach-at91/Kconfig           |  1 +
>   arch/arm/mach-at91/pm.c              | 27 +++++++++++++++++++-
>   arch/arm/mach-at91/pm_suspend.S      |  4 +--
>   include/linux/clk/at91_pmc.h         |  4 +++
>   include/soc/at91/sama7-ddr.h         | 15 +++++------
>   8 files changed, 91 insertions(+), 14 deletions(-)
> 


-- 
Nicolas Ferre