[PATCH V4 2/5] dt-bindings: mailbox: imx-mu: add i.MX93 S4 MU support
Peng Fan
peng.fan at nxp.com
Thu Feb 24 17:46:15 PST 2022
> Subject: Re: [PATCH V4 2/5] dt-bindings: mailbox: imx-mu: add i.MX93 S4 MU
> support
>
> On Wed, Feb 23, 2022 at 10:31:54AM +0800, Peng Fan (OSS) wrote:
> > From: Peng Fan <peng.fan at nxp.com>
> >
> > Similar to i.MX8ULP S4 MU, i.MX93 MU is dedicated for communication
> > between Sentinel and Cortex-A cores from hardware design, it could not
> > be reused for other purpose.
> >
> > However i.MX93 S4 MU use separate tx/rx interrupt, so update
> > interrupts and add interrupt-names property.
> >
> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at canonical.com>
> > Signed-off-by: Peng Fan <peng.fan at nxp.com>
> > ---
> > .../devicetree/bindings/mailbox/fsl,mu.yaml | 27
> ++++++++++++++++++-
> > 1 file changed, 26 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
> > b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
> > index 6d056d5e16bf..f5f9d501845d 100644
> > --- a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
> > +++ b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
> > @@ -29,6 +29,7 @@ properties:
> > - const: fsl,imx8ulp-mu
> > - const: fsl,imx8-mu-scu
> > - const: fsl,imx8-mu-seco
> > + - const: fsl,imx93-mu-s4
> > - const: fsl,imx8ulp-mu-s4
> > - items:
> > - const: fsl,imx93-mu
> > @@ -55,7 +56,13 @@ properties:
> > maxItems: 1
> >
> > interrupts:
> > - maxItems: 1
> > + minItems: 1
>
> I still don't think you tested this with 2 items. You need minItems and
> maxItems.
dt_binding check and dtbs_check both pass two interrupts entry.
So here it should be?
interrupts:
minItems: 1
maxItems: 2
>
> > +
> > + interrupt-names:
> > + minItems: 1
> > + items:
> > + - const: tx
> > + - const: rx
> >
> > "#mbox-cells":
> > description: |
> > @@ -90,6 +97,24 @@ required:
> > - interrupts
> > - "#mbox-cells"
> >
> > +allOf:
> > + - if:
> > + properties:
> > + compatible:
> > + enum:
> > + - fsl,imx93-mu-s4
> > + then:
> > + properties:
> > + interrupt-names:
> > + minItems: 2
> > + interrupts:
> > + maxItems: 2
>
> s/maxItems/minItems/
Fix in V5.
Thanks,
Peng.
>
> > +
> > + else:
> > + properties:
> > + interrupts:
> > + maxItems: 1
> > +
> > additionalProperties: false
> >
> > examples:
> > --
> > 2.25.1
> >
> >
More information about the linux-arm-kernel
mailing list