[PATCH v4 4/6] auxdisplay: add support for Titanmec TM1628 7 segment display controller
Heiner Kallweit
hkallweit1 at gmail.com
Thu Feb 24 12:09:46 PST 2022
This patch adds support for the Titanmec TM1628 7 segment display
controller. It's based on previous RFC work from Andreas Färber.
The RFC version placed the driver in the LED subsystem, but this was
NAK'ed by the LED maintainer. Therefore I moved the driver to
/drivers/auxdisplay what seems most reasonable to me.
Further changes to the RFC version:
- Driver can be built also w/o LED class support, for displays that
don't have any symbols to be exposed as LED's.
- Simplified the code and rewrote a lot of it.
- Driver is now kind of a MVP, but functionality should be sufficient
for most use cases.
- Use the existing 7 segment support in uapi/linux/map_to_7segment.h
as suggested by Geert Uytterhoeven.
Note: There's a number of chips from other manufacturers that are
almost identical, e.g. FD628, SM1628. Only difference I saw so
far is that they partially support other display modes.
TM1628: 6x12, 7x11
SM1628C: 4x13, 5x12, 6x11, 7x10
For typical displays on devices using these chips this
difference shouldn't matter.
Successfully tested on a TX3 Mini TV box that has an SM1628C and a
display with 4 digits and 7 symbols.
Co-developed-by: Andreas Färber <afaerber at suse.de>
Signed-off-by: Andreas Färber <afaerber at suse.de>
Signed-off-by: Heiner Kallweit <hkallweit1 at gmail.com>
---
v3:
- use Co-Developed-by
v4:
- switch to Co-developed-by
- style fixes
- fix potential write beyond end in display_text_store()
---
drivers/auxdisplay/Kconfig | 11 ++
drivers/auxdisplay/Makefile | 1 +
drivers/auxdisplay/tm1628.c | 376 ++++++++++++++++++++++++++++++++++++
3 files changed, 388 insertions(+)
create mode 100644 drivers/auxdisplay/tm1628.c
diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig
index 64012cda4..2764afc5c 100644
--- a/drivers/auxdisplay/Kconfig
+++ b/drivers/auxdisplay/Kconfig
@@ -203,6 +203,17 @@ config ARM_CHARLCD
line and the Linux version on the second line, but that's
still useful.
+config TM1628
+ tristate "TM1628 driver for LED 7/11 segment displays"
+ depends on SPI
+ depends on OF || COMPILE_TEST
+ help
+ Say Y to enable support for Titan Micro Electronics TM1628
+ LED controller.
+
+ It's a 3-wire SPI device controlling a two-dimensional grid of
+ LEDs. Dimming is applied to all outputs through an internal PWM.
+
menuconfig PARPORT_PANEL
tristate "Parallel port LCD/Keypad Panel support"
depends on PARPORT
diff --git a/drivers/auxdisplay/Makefile b/drivers/auxdisplay/Makefile
index 6968ed4d3..7728e17e1 100644
--- a/drivers/auxdisplay/Makefile
+++ b/drivers/auxdisplay/Makefile
@@ -14,3 +14,4 @@ obj-$(CONFIG_HT16K33) += ht16k33.o
obj-$(CONFIG_PARPORT_PANEL) += panel.o
obj-$(CONFIG_LCD2S) += lcd2s.o
obj-$(CONFIG_LINEDISP) += line-display.o
+obj-$(CONFIG_TM1628) += tm1628.o
diff --git a/drivers/auxdisplay/tm1628.c b/drivers/auxdisplay/tm1628.c
new file mode 100644
index 000000000..43d6f2626
--- /dev/null
+++ b/drivers/auxdisplay/tm1628.c
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Titan Micro Electronics TM1628 LED controller
+ *
+ * Copyright (c) 2019 Andreas Färber
+ * Copyright (c) 2022 Heiner Kallweit
+ */
+
+#include <linux/ctype.h>
+#include <linux/delay.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/spi/spi.h>
+#include <uapi/linux/map_to_7segment.h>
+
+#define TM1628_CMD_DISPLAY_MODE (0 << 6)
+#define TM1628_DISPLAY_MODE_6_12 0x02
+#define TM1628_DISPLAY_MODE_7_11 0x03
+
+#define TM1628_CMD_DATA (1 << 6)
+#define TM1628_DATA_TEST_MODE BIT(3)
+#define TM1628_DATA_FIXED_ADDR BIT(2)
+#define TM1628_DATA_WRITE_DATA 0x00
+#define TM1628_DATA_READ_DATA 0x02
+
+#define TM1628_CMD_DISPLAY_CTRL (2 << 6)
+#define TM1628_DISPLAY_CTRL_DISPLAY_ON BIT(3)
+
+#define TM1628_CMD_SET_ADDRESS (3 << 6)
+
+#define TM1628_BRIGHTNESS_MAX 7
+#define NUM_LED_SEGS 7
+
+/* Physical limits, depending on the mode the chip may support less */
+#define MAX_GRID_SIZE 7
+#define MAX_SEGMENT_NUM 16
+
+struct tm1628_led {
+ struct led_classdev leddev;
+ struct tm1628 *ctrl;
+ u32 grid;
+ u32 seg;
+};
+
+struct tm1628 {
+ struct spi_device *spi;
+ __le16 data[MAX_GRID_SIZE];
+ struct mutex disp_lock;
+ char text[MAX_GRID_SIZE + 1];
+ u8 segment_mapping[NUM_LED_SEGS];
+ u8 grid[MAX_GRID_SIZE];
+ int grid_size;
+ struct tm1628_led leds[];
+};
+
+/* Command 1: Display Mode Setting */
+static int tm1628_set_display_mode(struct spi_device *spi, u8 grid_mode)
+{
+ const u8 cmd = TM1628_CMD_DISPLAY_MODE | grid_mode;
+
+ return spi_write(spi, &cmd, 1);
+}
+
+/* Command 3: Address Setting */
+static int tm1628_set_address(struct spi_device *spi, u8 offset)
+{
+ const u8 cmd = TM1628_CMD_SET_ADDRESS | (offset * sizeof(__le16));
+
+ return spi_write(spi, &cmd, 1);
+}
+
+/* Command 2: Data Setting */
+static int tm1628_write_data(struct spi_device *spi, unsigned int offset,
+ unsigned int len)
+{
+ struct tm1628 *s = spi_get_drvdata(spi);
+ const u8 cmd = TM1628_CMD_DATA | TM1628_DATA_WRITE_DATA;
+ struct spi_transfer xfers[] = {
+ {
+ .tx_buf = &cmd,
+ .len = 1,
+ },
+ {
+ .tx_buf = (__force void *)(s->data + offset),
+ .len = len * sizeof(__le16),
+ },
+ };
+
+ if (offset + len > MAX_GRID_SIZE) {
+ dev_err(&spi->dev, "Invalid data address offset %u len %u\n",
+ offset, len);
+ return -EINVAL;
+ }
+
+ tm1628_set_address(spi, offset);
+
+ return spi_sync_transfer(spi, xfers, ARRAY_SIZE(xfers));
+}
+
+/* Command 4: Display Control */
+static int tm1628_set_display_ctrl(struct spi_device *spi, bool on)
+{
+ u8 cmd = TM1628_CMD_DISPLAY_CTRL | TM1628_BRIGHTNESS_MAX;
+
+ if (on)
+ cmd |= TM1628_DISPLAY_CTRL_DISPLAY_ON;
+
+ return spi_write(spi, &cmd, 1);
+}
+
+static int tm1628_show_text(struct tm1628 *s)
+{
+ static SEG7_CONVERSION_MAP(map_seg7, MAP_ASCII7SEG_ALPHANUM);
+ int msg_len, i, ret;
+
+ msg_len = strlen(s->text);
+
+ mutex_lock(&s->disp_lock);
+
+ for (i = 0; i < s->grid_size; i++) {
+ int pos = s->grid[i] - 1;
+ int j, char7_raw, char7;
+
+ if (i >= msg_len) {
+ s->data[pos] = 0;
+ continue;
+ }
+
+ char7_raw = map_to_seg7(&map_seg7, s->text[i]);
+
+ for (j = 0, char7 = 0; j < NUM_LED_SEGS; j++) {
+ if (char7_raw & BIT(j))
+ char7 |= BIT(s->segment_mapping[j] - 1);
+ }
+
+ s->data[pos] = cpu_to_le16(char7);
+ }
+
+ ret = tm1628_write_data(s->spi, 0, s->grid_size);
+
+ mutex_unlock(&s->disp_lock);
+
+ return ret;
+}
+
+static int tm1628_led_set_brightness(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct tm1628_led *led = container_of(led_cdev, struct tm1628_led, leddev);
+ struct tm1628 *s = led->ctrl;
+ int ret, offset = led->grid - 1;
+ __le16 bit = cpu_to_le16(BIT(led->seg - 1));
+
+ mutex_lock(&s->disp_lock);
+
+ if (brightness == LED_OFF)
+ s->data[offset] &= ~bit;
+ else
+ s->data[offset] |= bit;
+
+ ret = tm1628_write_data(s->spi, offset, 1);
+
+ mutex_unlock(&s->disp_lock);
+
+ return ret;
+}
+
+static enum led_brightness tm1628_led_get_brightness(struct led_classdev *led_cdev)
+{
+ struct tm1628_led *led = container_of(led_cdev, struct tm1628_led, leddev);
+ struct tm1628 *s = led->ctrl;
+ int offset = led->grid - 1;
+ __le16 bit = cpu_to_le16(BIT(led->seg - 1));
+ bool on;
+
+ mutex_lock(&s->disp_lock);
+ on = s->data[offset] & bit;
+ mutex_unlock(&s->disp_lock);
+
+ return on ? LED_ON : LED_OFF;
+}
+
+static int tm1628_register_led(struct tm1628 *s, struct fwnode_handle *node,
+ u32 grid, u32 seg, struct tm1628_led *led)
+{
+ struct device *dev = &s->spi->dev;
+ struct led_init_data init_data = { .fwnode = node };
+
+ led->ctrl = s;
+ led->grid = grid;
+ led->seg = seg;
+ led->leddev.max_brightness = LED_ON;
+ led->leddev.brightness_set_blocking = tm1628_led_set_brightness;
+ led->leddev.brightness_get = tm1628_led_get_brightness;
+
+ return devm_led_classdev_register_ext(dev, &led->leddev, &init_data);
+}
+
+static ssize_t display_text_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct tm1628 *s = dev_get_drvdata(dev);
+
+ return sysfs_emit(buf, "%s\n", s->text);
+}
+
+static ssize_t display_text_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct tm1628 *s = dev_get_drvdata(dev);
+ int ret, i;
+
+ for (i = 0; i < count && i < s->grid_size && isprint(buf[i]); i++)
+ s->text[i] = buf[i];
+
+ s->text[i] = '\0';
+
+ ret = tm1628_show_text(s);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static const DEVICE_ATTR_RW(display_text);
+
+static int tm1628_spi_probe(struct spi_device *spi)
+{
+ struct fwnode_handle *child;
+ unsigned int num_leds;
+ struct tm1628 *s;
+ int ret, i;
+
+ num_leds = device_get_child_node_count(&spi->dev);
+
+ s = devm_kzalloc(&spi->dev, struct_size(s, leds, num_leds), GFP_KERNEL);
+ if (!s)
+ return -ENOMEM;
+
+ s->spi = spi;
+ spi_set_drvdata(spi, s);
+
+ mutex_init(&s->disp_lock);
+
+ /* According to TM1628 datasheet */
+ msleep(200);
+
+ /* Clear screen */
+ ret = tm1628_write_data(spi, 0, MAX_GRID_SIZE);
+ if (ret)
+ return ret;
+
+ /* For now we support 6x12 mode only. This should be sufficient for most use cases */
+ ret = tm1628_set_display_mode(spi, TM1628_DISPLAY_MODE_6_12);
+ if (ret)
+ return ret;
+
+ ret = tm1628_set_display_ctrl(spi, true);
+ if (ret)
+ return ret;
+
+ num_leds = 0;
+
+ if (!IS_REACHABLE(CONFIG_LEDS_CLASS))
+ goto no_leds;
+
+ device_for_each_child_node(&spi->dev, child) {
+ u32 reg[2];
+
+ ret = fwnode_property_read_u32_array(child, "reg", reg, 2);
+ if (ret) {
+ dev_err(&spi->dev, "Reading %s reg property failed (%d)\n",
+ fwnode_get_name(child), ret);
+ continue;
+ }
+
+ if (reg[0] == 0 || reg[0] > MAX_GRID_SIZE) {
+ dev_err(&spi->dev, "Invalid grid %u at %s\n",
+ reg[0], fwnode_get_name(child));
+ continue;
+ }
+
+ if (reg[1] == 0 || reg[1] > MAX_SEGMENT_NUM) {
+ dev_err(&spi->dev, "Invalid segment %u at %s\n",
+ reg[1], fwnode_get_name(child));
+ continue;
+ }
+
+ ret = tm1628_register_led(s, child, reg[0], reg[1], s->leds + num_leds);
+ if (ret) {
+ dev_err(&spi->dev, "Failed to register LED %s (%d)\n",
+ fwnode_get_name(child), ret);
+ continue;
+ }
+ num_leds++;
+ }
+
+no_leds:
+ ret = device_property_count_u8(&spi->dev, "grid");
+ if (ret < 1 || ret > MAX_GRID_SIZE) {
+ dev_err(&spi->dev, "Invalid display length (%d)\n", ret);
+ return -EINVAL;
+ }
+
+ s->grid_size = ret;
+
+ ret = device_property_read_u8_array(&spi->dev, "grid", s->grid, s->grid_size);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < s->grid_size; i++) {
+ if (s->grid[i] < 1 || s->grid[i] > s->grid_size)
+ return -EINVAL;
+ }
+
+ ret = device_property_read_u8_array(&spi->dev, "segment-mapping",
+ s->segment_mapping, NUM_LED_SEGS);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < 7; i++) {
+ if (s->segment_mapping[i] < 1 || s->segment_mapping[i] > MAX_SEGMENT_NUM)
+ return -EINVAL;
+ }
+
+ ret = device_create_file(&spi->dev, &dev_attr_display_text);
+ if (ret)
+ return ret;
+
+ dev_info(&spi->dev, "Configured display with %u digits and %u symbols\n",
+ s->grid_size, num_leds);
+
+ return 0;
+}
+
+static void tm1628_spi_remove(struct spi_device *spi)
+{
+ device_remove_file(&spi->dev, &dev_attr_display_text);
+ tm1628_set_display_ctrl(spi, false);
+}
+
+static void tm1628_spi_shutdown(struct spi_device *spi)
+{
+ tm1628_set_display_ctrl(spi, false);
+}
+
+static const struct of_device_id tm1628_spi_of_matches[] = {
+ { .compatible = "titanmec,tm1628" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, tm1628_spi_of_matches);
+
+static const struct spi_device_id tm1628_spi_id_table[] = {
+ { "tm1628" },
+ {},
+};
+MODULE_DEVICE_TABLE(spi, tm1628_spi_id_table);
+
+static struct spi_driver tm1628_spi_driver = {
+ .probe = tm1628_spi_probe,
+ .remove = tm1628_spi_remove,
+ .shutdown = tm1628_spi_shutdown,
+ .id_table = tm1628_spi_id_table,
+
+ .driver = {
+ .name = "tm1628",
+ .of_match_table = tm1628_spi_of_matches,
+ },
+};
+module_spi_driver(tm1628_spi_driver);
+
+MODULE_DESCRIPTION("TM1628 LED controller driver");
+MODULE_AUTHOR("Andreas Färber <afaerber at suse.de>");
+MODULE_AUTHOR("Heiner Kallweit <hkallweit1 at gmail.com>");
+MODULE_LICENSE("GPL");
--
2.35.1
More information about the linux-arm-kernel
mailing list