[PATCH v2 11/23] PCI: aardvark: Fix setting MSI address

[Bjorn Helgaas]

[+cc Rob]

On Thu, Feb 24, 2022 at 01:59:01PM +0100, Pali Rohár wrote:
> On Wednesday 23 February 2022 12:13:12 Bjorn Helgaas wrote:
> > On Fri, Feb 18, 2022 at 03:43:29PM +0100, Marek Behún wrote:
> > > On Thu, 17 Feb 2022 11:14:52 -0600
> > > Bjorn Helgaas <helgaas at kernel.org> wrote:
> > > 
> > > > > +	phys_addr_t msi_addr;
> > > > >  	u32 reg;
> > > > >  	int i;
> > > > >  
> > > > > @@ -561,6 +561,11 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
> > > > >  	reg |= LANE_COUNT_1;
> > > > >  	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
> > > > >  
> > > > > +	/* Set MSI address */
> > > > > +	msi_addr = virt_to_phys(pcie);  
> > > > 
> > > > Strictly speaking, msi_addr should be a pci_bus_addr_t, not a
> > > > phys_addr_t, and virt_to_phys() doesn't return a bus address.

On second thought, probably a dma_addr_t, not a pci_bus_addr_t.

> > > the problem here is that as far as we know currently there is no
> > > function that converts a virtual address to pci_bus_addr_t like
> > > virt_to_phys() does to convert to phys_addr_t.
> > > 
> > > On Armada 3720 there are PCIe Controller Address Decoder Registers,
> > > which such a translating function would need to consult to do the
> > > translation. But the default settings of these registers is to map PCIe
> > > addresses 1 to 1 to physical addresses, and no driver changes these
> > > registers.
> > 
> > The poorly-named pcibios_resource_to_bus() (I think the name is my
> > fault) is the way to convert a CPU physical address to a PCI bus
> > address.
> 
> But here it is needed to do something different. It is needed to do
> inverse mapping of function which converts PCI bus address to CPU
> physical address of CPU memory. So to converting CPU physical address of
> CPU memory to PCI bus address from PCI bus point of view.
>
> I think that this information is stored in dma_ranges member of struct
> pci_host_bridge. But function pcibios_resource_to_bus() looks at the
> ->windows member which converts CPU physical address of PCI memory (not
> CPU memory) to PCI bus address, which is something different. So
> pcibios_resource_to_bus() would not work here and it may return
> incorrect values (as PCI memory may be different from CPU point of view
> and PCI bus point of view).

Oh, sorry, indeed you are correct and I was completely on the wrong
track.  pcibios_resource_to_bus() is what you need for doing MMIO --
CPU accesses to things on PCI.

MSI is the reverse.  From the device's point of view, an MSI is
basically a DMA as you allude to above, so I would expect the DMA API
to be involved somehow.

I do see a couple drivers using the DMA API for this:

  struct pcie_port {
    dma_addr_t msi_data;
  };

  dw_pcie_host_init
    pp->msi_data = dma_map_single_attrs(..., &pp->msi_msg, ...)
    dw_pcie_setup_rc
      dw_pcie_msi_init
        u64 msi_target = (u64)pp->msi_data;
	dw_pcie_writel_dbi(pci, PCIE_MSI_ADDR_LO, lower_32_bits(msi_target));

  dw_pci_setup_msi_msg
    u64 msi_target = (u64)pp->msi_data;
    msg->address_lo = lower_32_bits(msi_target);

  -----------------------------------------------------------

  struct tegra_msi {
    dma_addr_t phys;
  };

  tegra_pcie_probe
    tegra_pcie_msi_setup
      msi->virt = dma_alloc_attrs(..., &msi->phys, ...);

  tegra_pcie_enable_msi
    afi_writel(pcie, msi->phys, ...);

  tegra_compose_msi_msg
    msg->address_low = lower_32_bits(msi->phys);

Bjorn