[PATCH] ARM: dts: renesas: Align GPIO hog names with dtschema

[Geert Uytterhoeven]

Dtschema expects GPIO hogs to end with a "hog" suffix.
Also, the convention for node names is to use hyphens, not underscores.

Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
To be queued in renesas-devel for v5.18.
---
 arch/arm/boot/dts/iwg20d-q7-common.dtsi         | 2 +-
 arch/arm/boot/dts/r8a7740-armadillo800eva.dts   | 2 +-
 arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts | 4 ++--
 arch/arm/boot/dts/r8a7742-iwg21d-q7.dts         | 4 ++--
 arch/arm/boot/dts/r8a7742-iwg21m.dtsi           | 2 +-
 arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts       | 2 +-
 6 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index 849034a49a3f98e2..03caea6fc6ffa4cf 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -181,7 +181,7 @@ &du {
 };
 
 &gpio2 {
-	touch-interrupt {
+	touch-interrupt-hog {
 		gpio-hog;
 		gpios = <12 GPIO_ACTIVE_LOW>;
 		input;
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index c3ca693b91daebed..4a9e6343d4759b74 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -276,7 +276,7 @@ lcd0_pins: lcd0 {
 		function = "lcd0";
 	};
 
-	lcd0_mux {
+	lcd0-mux-hog {
 		/* DBGMD/LCDC0/FSIA MUX */
 		gpio-hog;
 		gpios = <176 0>;
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
index 3c8a7c8b1fdd56d3..4e58c54cde17c382 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
@@ -91,10 +91,10 @@ phy1: ethernet-phy at 1 {
 
 &gpio0 {
 	/* Disable hogging GP0_18 to output LOW */
-	/delete-node/ qspi_en;
+	/delete-node/ qspi-en-hog;
 
 	/* Hog GP0_18 to output HIGH to enable VIN2 */
-	vin2_en {
+	vin2-en-hog {
 		gpio-hog;
 		gpios = <18 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
index a5a79cdbcd0ee09b..64102b664055b475 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
@@ -226,7 +226,7 @@ &du {
 };
 
 &gpio0 {
-	touch-interrupt {
+	touch-interrupt-hog {
 		gpio-hog;
 		gpios = <24 GPIO_ACTIVE_LOW>;
 		input;
@@ -234,7 +234,7 @@ touch-interrupt {
 };
 
 &gpio1 {
-	can-trx-en-gpio{
+	can-trx-en-hog {
 		gpio-hog;
 		gpios = <28 GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm/boot/dts/r8a7742-iwg21m.dtsi b/arch/arm/boot/dts/r8a7742-iwg21m.dtsi
index 5621c9ed698f0e4a..b281a4d164b0aae8 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21m.dtsi
+++ b/arch/arm/boot/dts/r8a7742-iwg21m.dtsi
@@ -37,7 +37,7 @@ &extal_clk {
 
 &gpio0 {
 	/* GP0_18 set low to select QSPI. Doing so will disable VIN2 */
-	qspi_en {
+	qspi-en-hog {
 		gpio-hog;
 		gpios = <18 GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
index b024621c998103b2..6448022852491661 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -116,7 +116,7 @@ &extal_clk {
 };
 
 &gpio2 {
-	interrupt-fixup {
+	interrupt-fixup-hog {
 		gpio-hog;
 		gpios = <29 GPIO_ACTIVE_HIGH>;
 		line-name = "hdmi-hpd-int";
-- 
2.25.1