[PATCH v5.1 1/2] ARM: dts: bcm2835-rpi: Move the firmware clocks

[Jean-Michel Hautbois]

The bcm2835-rpi.dtsi is used by all Raspberry Pi generations. Move the
firmware clocks from bcm2711 specific dtsi to the general dtsi.

Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois at ideasonboard.com>
---
 arch/arm/boot/dts/bcm2711-rpi.dtsi | 5 -----
 arch/arm/boot/dts/bcm2835-rpi.dtsi | 5 +++++
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/bcm2711-rpi.dtsi b/arch/arm/boot/dts/bcm2711-rpi.dtsi
index ca266c5d9f9b..93b96cebe949 100644
--- a/arch/arm/boot/dts/bcm2711-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2711-rpi.dtsi
@@ -19,11 +19,6 @@ aliases {
 };
 
 &firmware {
-	firmware_clocks: clocks {
-		compatible = "raspberrypi,firmware-clocks";
-		#clock-cells = <1>;
-	};
-
 	expgpio: gpio {
 		compatible = "raspberrypi,firmware-gpio";
 		gpio-controller;
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 87ddcad76083..8f988dd253fc 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -21,6 +21,11 @@ firmware: firmware {
 			dma-ranges;
 		};
 
+		firmware_clocks: clocks {
+			compatible = "raspberrypi,firmware-clocks";
+			#clock-cells = <1>;
+		};
+
 		power: power {
 			compatible = "raspberrypi,bcm2835-power";
 			firmware = <&firmware>;
-- 
2.32.0