[PATCH] arm64: dts: rockchip: set vdd_gpu regulator on rk3568-evb1-v10 to always on

Michael Riesch michael.riesch at wolfvision.net
Wed Feb 23 03:20:08 PST 2022


As discussed in [0], the Rockchip power domain driver does not consider
the external supplies (such as VDD_GPU on the RK3568 EVB1). In the scope of
this discussion it has been pointed out that turning this voltage on/off
on the fly is not explicitly supported. This patch follows the other RK356x
boards by example and sets the vdd_gpu regulator to always on.

[0] https://lore.kernel.org/linux-rockchip/20211217130919.3035788-1-s.hauer@pengutronix.de/

Signed-off-by: Michael Riesch <michael.riesch at wolfvision.net>
---
 arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
index f3d0bc259166..bb7177ff92ac 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
@@ -219,6 +219,7 @@ regulator-state-mem {
 
 			vdd_gpu: DCDC_REG2 {
 				regulator-name = "vdd_gpu";
+				regulator-always-on;
 				regulator-init-microvolt = <900000>;
 				regulator-initial-mode = <0x2>;
 				regulator-min-microvolt = <500000>;
-- 
2.30.2




More information about the linux-arm-kernel mailing list