[PATCH V3 1/5] dt-bindings: clock: Add imx93 clock support

[Krzysztof Kozlowski]

On 23/02/2022 07:43, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan at nxp.com>
> 
> Add the clock dt-binding file for i.MX93.
> 
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> ---
>  .../bindings/clock/imx93-clock.yaml           | 63 +++++++++++++++++++
>  1 file changed, 63 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/imx93-clock.yaml
> 
> diff --git a/Documentation/devicetree/bindings/clock/imx93-clock.yaml b/Documentation/devicetree/bindings/clock/imx93-clock.yaml
> new file mode 100644
> index 000000000000..a4c3ae23b8c3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/imx93-clock.yaml
> @@ -0,0 +1,63 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/imx93-clock.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP i.MX93 Clock Control Module Binding
> +
> +maintainers:
> +  - Peng Fan <peng.fan at nxp.com>
> +
> +description: |
> +  i.MX93 clock control module is an integrated clock controller, which
> +  includes clock generator, clock gate and supplies to all modules.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - fsl,imx93-ccm
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    description:
> +      specify the external clocks used by the CCM module.
> +    items:
> +      - description: 32k osc
> +      - description: 24m osc
> +      - description: ext1 clock input
> +
> +  clock-names:
> +    description:
> +      specify the external clocks names used by the CCM module.
> +    items:
> +      - const: osc_32k
> +      - const: osc_24m
> +      - const: clk_ext1
> +
> +  '#clock-cells':
> +    const: 1
> +    description:
> +      The clock consumer should specify the desired clock by having the clock
> +      ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx93-clock.h
> +      for the full list of i.MX93 clock IDs.

Skip most of this description, it's obvious. Leave only reference to the
header file, either here or in description of entire file.



Best regards,
Krzysztof