[PATCH v2 06/23] arm64: dts: mt8192: Add usb-phy node

Nícolas F. R. A. Prado nfraprado at collabora.com
Tue Feb 22 12:10:34 PST 2022


On Fri, Feb 18, 2022 at 05:16:16PM +0800, Allen-KH Cheng wrote:
> Add xhci node for mt8192 SoC.
> 
> Signed-off-by: Allen-KH Cheng <allen-kh.cheng at mediatek.com>
> ---
>  arch/arm64/boot/dts/mediatek/mt8192.dtsi | 25 ++++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> index 61aadd7bd397..ce18d692175f 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> @@ -875,6 +875,31 @@
>  			#clock-cells = <1>;
>  		};
>  
> +		u3phy0: usb-phy at 11e40000 {

According to Documentation/devicetree/bindings/phy/mediatek,tphy.yaml, this node
should be called t-phy. Only the child nodes should be usb-phy.

> +			compatible = "mediatek,mt8192-tphy",
> +				     "mediatek,generic-tphy-v2";
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +			status = "okay";

"okay" is already the default status, so you can drop this line, as well as the
ones on the child nodes below.

> +
> +			u2port0: usb-phy at 11e40000 {
> +				reg = <0 0x11e40000 0 0x700>;
> +				clocks = <&clk26m>;
> +				clock-names = "ref";
> +				#phy-cells = <1>;
> +				status = "okay";
> +			};
> +
> +			u3port0: usb-phy at 11e40700 {
> +				reg = <0 0x11e40700 0 0x900>;
> +				clocks = <&clk26m>;
> +				clock-names = "ref";
> +				#phy-cells = <1>;
> +				status = "okay";
> +			};
> +		};
> +
>  		i2c0: i2c at 11f00000 {
>  			compatible = "mediatek,mt8192-i2c";
>  			reg = <0 0x11f00000 0 0x1000>,
> -- 
> 2.18.0
> 
> 



More information about the linux-arm-kernel mailing list