[PATCH] clk: cleanup comments

[trix at redhat.com]

From: Tom Rix <trix at redhat.com>

For spdx
Space instead of tab before spdx tag

Removed repeated works
the, to, two

Replacements
much much to a much
'to to' to 'to do'
aready to already
Comunications to Communications
freqency to frequency

Signed-off-by: Tom Rix <trix at redhat.com>
---
 drivers/clk/at91/sckc.c              | 2 +-
 drivers/clk/axis/clk-artpec6.c       | 2 +-
 drivers/clk/bcm/clk-iproc.h          | 2 +-
 drivers/clk/bcm/clk-kona-setup.c     | 2 +-
 drivers/clk/clk-fractional-divider.c | 2 +-
 drivers/clk/clk-si5341.c             | 2 +-
 drivers/clk/meson/meson8b.c          | 2 +-
 drivers/clk/mmp/pwr-island.c         | 2 +-
 drivers/clk/socfpga/clk-gate-s10.c   | 2 +-
 9 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/clk/at91/sckc.c b/drivers/clk/at91/sckc.c
index 2d65770d8665..fdc9b669f8a7 100644
--- a/drivers/clk/at91/sckc.c
+++ b/drivers/clk/at91/sckc.c
@@ -535,7 +535,7 @@ static int clk_sama5d4_slow_osc_prepare(struct clk_hw *hw)
 
 	/*
 	 * Assume that if it has already been selected (for example by the
-	 * bootloader), enough time has aready passed.
+	 * bootloader), enough time has already passed.
 	 */
 	if ((readl(osc->sckcr) & osc->bits->cr_oscsel)) {
 		osc->prepared = true;
diff --git a/drivers/clk/axis/clk-artpec6.c b/drivers/clk/axis/clk-artpec6.c
index f95959ff85ac..a3f349d4624d 100644
--- a/drivers/clk/axis/clk-artpec6.c
+++ b/drivers/clk/axis/clk-artpec6.c
@@ -2,7 +2,7 @@
 /*
  * ARTPEC-6 clock initialization
  *
- * Copyright 2015-2016 Axis Comunications AB.
+ * Copyright 2015-2016 Axis Communications AB.
  */
 
 #include <linux/clk-provider.h>
diff --git a/drivers/clk/bcm/clk-iproc.h b/drivers/clk/bcm/clk-iproc.h
index a48ddd3e0b28..d7e5b94bed45 100644
--- a/drivers/clk/bcm/clk-iproc.h
+++ b/drivers/clk/bcm/clk-iproc.h
@@ -89,7 +89,7 @@
  * Parameters for VCO frequency configuration
  *
  * VCO frequency =
- * ((ndiv_int + ndiv_frac / 2^20) * (ref freqeuncy  / pdiv)
+ * ((ndiv_int + ndiv_frac / 2^20) * (ref frequency  / pdiv)
  */
 struct iproc_pll_vco_param {
 	unsigned long rate;
diff --git a/drivers/clk/bcm/clk-kona-setup.c b/drivers/clk/bcm/clk-kona-setup.c
index e65eeef9cbaf..5dd65164c8b1 100644
--- a/drivers/clk/bcm/clk-kona-setup.c
+++ b/drivers/clk/bcm/clk-kona-setup.c
@@ -510,7 +510,7 @@ static bool kona_clk_valid(struct kona_clk *bcm_clk)
  * placeholders for non-supported clocks.  Keep track of the
  * position of each clock name in the original array.
  *
- * Allocates an array of pointers to to hold the names of all
+ * Allocates an array of pointers to hold the names of all
  * non-null entries in the original array, and returns a pointer to
  * that array in *names.  This will be used for registering the
  * clock with the common clock code.  On successful return,
diff --git a/drivers/clk/clk-fractional-divider.c b/drivers/clk/clk-fractional-divider.c
index 4274540327ce..8efa5142ff8c 100644
--- a/drivers/clk/clk-fractional-divider.c
+++ b/drivers/clk/clk-fractional-divider.c
@@ -34,7 +34,7 @@
  * and assume that the IP, that needs m and n, has also its own
  * prescaler, which is capable to divide by 2^scale. In this way
  * we get the denominator to satisfy the desired range (2) and
- * at the same time much much better result of m and n than simple
+ * at the same time a much better result of m and n than simple
  * saturated values.
  */
 
diff --git a/drivers/clk/clk-si5341.c b/drivers/clk/clk-si5341.c
index 071f5a1c8a1c..41851f41b682 100644
--- a/drivers/clk/clk-si5341.c
+++ b/drivers/clk/clk-si5341.c
@@ -655,7 +655,7 @@ static unsigned long si5341_synth_clk_recalc_rate(struct clk_hw *hw,
 	f = synth->data->freq_vco;
 	f *= n_den >> 4;
 
-	/* Now we need to to 64-bit division: f/n_num */
+	/* Now we need to do 64-bit division: f/n_num */
 	/* And compensate for the 4 bits we dropped */
 	f = div64_u64(f, (n_num >> 4));
 
diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index cd0f5bae24d4..8f3b7a94a667 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -2232,7 +2232,7 @@ static struct clk_regmap meson8b_vpu_1 = {
 };
 
 /*
- * The VPU clock has two two identical clock trees (vpu_0 and vpu_1)
+ * The VPU clock has two identical clock trees (vpu_0 and vpu_1)
  * muxed by a glitch-free switch on Meson8b and Meson8m2. The CCF can
  * actually manage this glitch-free mux because it does top-to-bottom
  * updates the each clock tree and switches to the "inactive" one when
diff --git a/drivers/clk/mmp/pwr-island.c b/drivers/clk/mmp/pwr-island.c
index ab57c0e995c1..edaa2433a472 100644
--- a/drivers/clk/mmp/pwr-island.c
+++ b/drivers/clk/mmp/pwr-island.c
@@ -76,7 +76,7 @@ static int mmp_pm_domain_power_off(struct generic_pm_domain *genpd)
 	if (pm_domain->lock)
 		spin_lock_irqsave(pm_domain->lock, flags);
 
-	/* Turn off and isolate the the power island. */
+	/* Turn off and isolate the power island. */
 	val = readl(pm_domain->reg);
 	val &= ~pm_domain->power_on;
 	val &= ~0x100;
diff --git a/drivers/clk/socfpga/clk-gate-s10.c b/drivers/clk/socfpga/clk-gate-s10.c
index 32567795765f..3930d922efb4 100644
--- a/drivers/clk/socfpga/clk-gate-s10.c
+++ b/drivers/clk/socfpga/clk-gate-s10.c
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier:	GPL-2.0
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2017, Intel Corporation
  */
-- 
2.26.3