[RFC PATCH 8/8] arm64: dts: ti: use 'freq-table' in UFS node

[Nishanth Menon]

On 14:20-20220221, Krzysztof Kozlowski wrote:
> On 21/02/2022 14:13, Nishanth Menon wrote:
> > On 19:45-20220219, Krzysztof Kozlowski wrote:
> >> The 'freq-table-hz' property is deprecated by UFS bindings.
> >> The uint32-array requires also element to be passed within one <> block.
> >>
> >> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at canonical.com>
> >> ---
> >>  arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 4 +++-
> >>  1 file changed, 3 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> >> index 599861259a30..c3afef0321ae 100644
> >> --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> >> +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> >> @@ -1257,7 +1257,9 @@ ufs at 4e84000 {
> >>  			compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0";
> >>  			reg = <0x0 0x4e84000 0x0 0x10000>;
> >>  			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
> >> -			freq-table-hz = <250000000 250000000>, <19200000 19200000>, <19200000 19200000>;
> >> +			freq-table = <250000000 250000000
> > 
> > <min max> is much more readable and less error prone in case of a large
> > set.
> 
> Pairs are easily visible if split per line, so readability is similar.
> Not much is lost.
> 
> > 
> >> +				      19200000 19200000
> >> +				      19200000 19200000>;
> > 
> > are you sure the removal of the tuple adds value?
> 
> DT schema requires it, or rather: I do not know how to express uint32
> tuples in DT schema. All my tries failed.

https://www.kernel.org/doc/Documentation/devicetree/bindings/opp/opp-v1.yaml
comes to mind..

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D