[PATCH v2 0/3] PHYTEC i.MX 6UL/ULL devicetree patches

[Andrej Picej]

Hi all,

this patch series contains PHYTEC i.MX 6UL/ULL devicetree patches not
yet upstreamed.

First and second patch add devicetree for relatively new phyGATE
Tauri-S, which is based on i.MX 6ULL.

The third patch moves from using 2 pwm-cell to default 3 cell pwm
property.

Changes in v2:
 - dropped the patch: "ARM: dts: imx6ul: phycore: Change USB LDO voltage
   for usb compliance" (LDO regulator shouldn't be configured as
   always-on, it should be enabled/disabled by consumer),
 - other changes are described in the corresponding patches.

Best regards,
Andrej

Alexander Bauer (1):
  ARM: dts: imx6ull: Add support for PHYTEC phyGATE-Tauri-S with i.MX
    6ULL

Andrej Picej (2):
  dt-bindings: arm: fsl: add PHYTEC phyGATE Tauri i.MX6 ULL
  ARM: dts: imx6ul: peb-av-02: move to 3 cell pwm

 .../devicetree/bindings/arm/fsl.yaml          |   9 +
 arch/arm/boot/dts/Makefile                    |   2 +
 .../dts/imx6ul-phytec-segin-peb-av-02.dtsi    |   3 +-
 .../boot/dts/imx6ull-phytec-tauri-emmc.dts    |  20 +
 .../boot/dts/imx6ull-phytec-tauri-nand.dts    |  20 +
 arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi   | 588 ++++++++++++++++++
 6 files changed, 640 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx6ull-phytec-tauri-emmc.dts
 create mode 100644 arch/arm/boot/dts/imx6ull-phytec-tauri-nand.dts
 create mode 100644 arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi

-- 
2.25.1