[PATCH v2 0/2] arm64: renesas: Add R-Car S4-8 Pin control support

[Geert Uytterhoeven]

	Hi all,

This patch series adds pin control support for the Renesas R-Car S4-8
Soc on the Spider board, and enables pin control for the serial console.

Changes compared to v1[1]:
  - Drop register banks 4-7, as they can only be accessed from the
    Control Domain.

Serial console and I2C[2] have been tested on the Renesas Spider
development board.

Thanks for your comments!

[1] "[PATCH/RFC 00/15] arm64: renesas: Add-R-Car S4-8 Pin control support"
    https://lore.kernel.org/r/cover.1642599415.git.geert+renesas@glider.be
[2] "[PATCH 0/3] arm64: dts: renesas: spider: Add I2C and EEPROM support"
    https://lore.kernel.org/r/cover.1643898884.git.geert+renesas@glider.be

Geert Uytterhoeven (2):
  arm64: dts: renesas: r8a779f0: Add pinctrl device node
  arm64: dts: renesas: spider: Complete SCIF3 description

 .../boot/dts/renesas/r8a779f0-spider-cpu.dtsi | 23 +++++++++++++++++++
 arch/arm64/boot/dts/renesas/r8a779f0.dtsi     |  6 +++++
 2 files changed, 29 insertions(+)

-- 
2.25.1

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds