[PATCH v2 7/9] arm64: dts: imx8mp: add HSIO power-domains
Lucas Stach
l.stach at pengutronix.de
Mon Feb 21 02:05:00 PST 2022
Hi Laurent,
Am Samstag, dem 19.02.2022 um 09:40 +0200 schrieb Laurent Pinchart:
> Hi Lucas,
>
> Thank you for the patch.
>
> On Mon, Feb 07, 2022 at 08:25:45PM +0100, Lucas Stach wrote:
> > This adds the GPC and HSIO blk-ctrl nodes providing power control for
> > the high-speed (USB and PCIe) IOs.
> >
> > Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
> > ---
> > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 63 ++++++++++++++++++++---
> > 1 file changed, 57 insertions(+), 6 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > index 6b840c05dd77..dc488a147d0c 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > @@ -4,6 +4,7 @@
> > */
> >
> > #include <dt-bindings/clock/imx8mp-clock.h>
> > +#include <dt-bindings/power/imx8mp-power.h>
> > #include <dt-bindings/gpio/gpio.h>
> > #include <dt-bindings/input/input.h>
> > #include <dt-bindings/interrupt-controller/arm-gic.h>
> > @@ -475,6 +476,44 @@ src: reset-controller at 30390000 {
> > interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
> > #reset-cells = <1>;
> > };
> > +
> > + gpc: gpc at 303a0000 {
> > + compatible = "fsl,imx8mp-gpc";
> > + reg = <0x303a0000 0x10000>;
>
> According to the reference manual, the GPC occupies 4kB, not 64kB.
Right, will fix.
>
> > + interrupt-parent = <&gic>;
> > + interrupt-controller;
> > + #interrupt-cells = <3>;
> > +
> > + pgc {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
>
> We're working on support for the MEDIAMIX power domains, which we'll
> rebase on top of this. In case the HSIO part still needs more work,
> could you split this patch in two, with one patch that adds the PGC,
> with an empty pgc nodde, and a second patch that adds the HSIO-related
> power domains ? The first one could then be merged faster (it would be
> great if it could get in v5.18).
I don't think the HSIO part is controversial. It seems to work well in
my testing and DT binding is already reviewed. Not sure if someone is
going to review it properly, but I hope that we can land it together
with the reset of this series.
>
> > + pgc_pcie_phy: power-domain at 1 {
> > + #power-domain-cells = <0>;
> > + reg = <IMX8MP_POWER_DOMAIN_PCIE_PHY>;
> > + };
> > +
> > + pgc_usb1_phy: power-domain at 2 {
> > + #power-domain-cells = <0>;
> > + reg = <IMX8MP_POWER_DOMAIN_USB1_PHY>;
> > + };
> > +
> > + pgc_usb2_phy: power-domain at 3 {
> > + #power-domain-cells = <0>;
> > + reg = <IMX8MP_POWER_DOMAIN_USB2_PHY>;
> > + };
> > +
> > + pgc_hsiomix: power-domains at 17 {
> > + #power-domain-cells = <0>;
> > + reg = <IMX8MP_POWER_DOMAIN_HSIOMIX>;
> > + clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
> > + <&clk IMX8MP_CLK_HSIO_ROOT>;
> > + assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
> > + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
> > + assigned-clock-rates = <500000000>;
> > + };
> > + };
> > + };
> > };
> >
> > aips2: bus at 30400000 {
> > @@ -908,6 +947,20 @@ ddr-pmu at 3d800000 {
> > interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> > };
> >
> > + hsio_blk_ctrl: blk-ctrl at 32f10000 {
> > + compatible = "fsl,imx8mp-hsio-blk-ctrl", "syscon";
> > + reg = <0x32f10000 0x24>;
> > + clocks = <&clk IMX8MP_CLK_USB_ROOT>,
> > + <&clk IMX8MP_CLK_PCIE_ROOT>;
> > + clock-names = "usb", "pcie";
> > + power-domains = <&pgc_hsiomix>, <&pgc_hsiomix>,
> > + <&pgc_usb1_phy>, <&pgc_usb2_phy>,
> > + <&pgc_hsiomix>, <&pgc_pcie_phy>;
>
> Would it be useful to rework the driver to avoid specifying the same
> parent power domain multiple times in DT ?
I don't think so. That's the pattern we used for all the other blk-
ctrls, where each virtual power-domain in the blk-ctrl has its own
handle to a upstream GPC power domain. I don't see why we would want to
change this now.
Regards,
Lucas
>
> > + power-domain-names = "bus", "usb", "usb-phy1",
> > + "usb-phy2", "pcie", "pcie-phy";
> > + #power-domain-cells = <1>;
> > + };
> > +
> > usb3_phy0: usb-phy at 381f0040 {
> > compatible = "fsl,imx8mp-usb-phy";
> > reg = <0x381f0040 0x40>;
> > @@ -915,6 +968,7 @@ usb3_phy0: usb-phy at 381f0040 {
> > clock-names = "phy";
> > assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>;
> > assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
> > + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB_PHY1>;
> > #phy-cells = <0>;
> > status = "disabled";
> > };
> > @@ -926,6 +980,7 @@ usb3_0: usb at 32f10100 {
> > <&clk IMX8MP_CLK_USB_ROOT>;
> > clock-names = "hsio", "suspend";
> > interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
> > + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
> > #address-cells = <1>;
> > #size-cells = <1>;
> > dma-ranges = <0x40000000 0x40000000 0xc0000000>;
> > @@ -939,9 +994,6 @@ usb_dwc3_0: usb at 38100000 {
> > <&clk IMX8MP_CLK_USB_CORE_REF>,
> > <&clk IMX8MP_CLK_USB_ROOT>;
> > clock-names = "bus_early", "ref", "suspend";
> > - assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
> > - assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
> > - assigned-clock-rates = <500000000>;
> > interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> > phys = <&usb3_phy0>, <&usb3_phy0>;
> > phy-names = "usb2-phy", "usb3-phy";
> > @@ -957,6 +1009,7 @@ usb3_phy1: usb-phy at 382f0040 {
> > clock-names = "phy";
> > assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>;
> > assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
> > + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB_PHY2>;
> > #phy-cells = <0>;
> > };
> >
> > @@ -967,6 +1020,7 @@ usb3_1: usb at 32f10108 {
> > <&clk IMX8MP_CLK_USB_ROOT>;
> > clock-names = "hsio", "suspend";
> > interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
> > + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
> > #address-cells = <1>;
> > #size-cells = <1>;
> > dma-ranges = <0x40000000 0x40000000 0xc0000000>;
> > @@ -980,9 +1034,6 @@ usb_dwc3_1: usb at 38200000 {
> > <&clk IMX8MP_CLK_USB_CORE_REF>,
> > <&clk IMX8MP_CLK_USB_ROOT>;
> > clock-names = "bus_early", "ref", "suspend";
> > - assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
> > - assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
> > - assigned-clock-rates = <500000000>;
> > interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
> > phys = <&usb3_phy1>, <&usb3_phy1>;
> > phy-names = "usb2-phy", "usb3-phy";
> >
>
More information about the linux-arm-kernel
mailing list