[PATCH v1 6/8] ARM: dts: imx6dl-victgo: Add interrupt-counter nodes

[Oleksij Rempel]

From: Robin van der Gracht <robin at protonic.nl>

Interrupt counter is mainlined, now we can add missing counter nodes.

Signed-off-by: Robin van der Gracht <robin at protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel at pengutronix.de>
---
 arch/arm/boot/dts/imx6dl-victgo.dts | 41 ++++++++++++++++++++++++++++-
 1 file changed, 40 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/imx6dl-victgo.dts
index 20c7f80e5ec9..907682248aa7 100644
--- a/arch/arm/boot/dts/imx6dl-victgo.dts
+++ b/arch/arm/boot/dts/imx6dl-victgo.dts
@@ -54,6 +54,27 @@ comp0_out: endpoint {
 		};
 	};
 
+	counter-0 {
+		compatible = "interrupt-counter";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_counter0>;
+		gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	};
+
+	counter-1 {
+		compatible = "interrupt-counter";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_counter1>;
+		gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	};
+
+	counter-2 {
+		compatible = "interrupt-counter";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_counter2>;
+		gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -400,7 +421,7 @@ &gpio1 {
 
 &gpio2 {
 	gpio-line-names =
-		"", "", "", "", "", "", "", "",
+		"YACO_WHEEL", "YACO_RADAR", "YACO_PTO", "", "", "", "", "",
 		"", "LED_PWM", "", "", "",
 			"", "", "",
 		"", "", "", "", "", "", "ISB_IN1", "ON_SWITCH",
@@ -706,6 +727,24 @@ MX6QDL_PAD_KEY_ROW3__GPIO4_IO13			0x13008
 		>;
 	};
 
+	pinctrl_counter0: counter0grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00			0x1b000
+		>;
+	};
+
+	pinctrl_counter1: counter1grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01			0x1b000
+		>;
+	};
+
+	pinctrl_counter2: counter2grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02			0x1b000
+		>;
+	};
+
 	pinctrl_ecspi1: ecspi1grp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D17__ECSPI1_MISO			0x100b1
-- 
2.30.2