[PATCH 2/2] arm64: dts: imx8mm: Add support for Data Modul i.MX8M Mini eDM SBC
Marek Vasut
marex at denx.de
Sun Feb 20 16:17:38 PST 2022
Add support for Data Modul i.MX8M Mini eDM SBC board. This is an
evaluation board for various custom display units. Currently
supported are serial console, ethernet, eMMC, SD, PCIe, SPI NOR,
USB host and USB OTG.
Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Fabio Estevam <festevam at denx.de>
Cc: Peng Fan <peng.fan at nxp.com>
Cc: Shawn Guo <shawnguo at kernel.org>
Cc: NXP Linux Team <linux-imx at nxp.com>
To: linux-arm-kernel at lists.infradead.org
---
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../freescale/imx8mm-data-modul-edm-sbc.dts | 996 ++++++++++++++++++
2 files changed, 997 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index d96eb4cbd9900..8a12a5cf456a1 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -49,6 +49,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-data-modul-edm-sbc.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-emcon-avari.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts
new file mode 100644
index 0000000000000..154116d01c94d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts
@@ -0,0 +1,996 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Marek Vasut <marex at denx.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/net/qca-ar803x.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mm.dtsi"
+
+/ {
+ model = "Data Modul i.MX8M Mini eDM SBC";
+ compatible = "dmo,imx8mm-data-modul-edm-sbc", "fsl,imx8mm";
+
+ aliases {
+ rtc0 = &rtc;
+ rtc1 = &snvs_rtc;
+ };
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ memory at 40000000 {
+ device_type = "memory";
+ /* There are 1/2/4 GiB options, adjusted by bootloader. */
+ reg = <0x0 0x40000000 0 0x40000000>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_panel_backlight>;
+ brightness-levels = <0 1 10 20 30 40 50 60 70 75 80 90 100>;
+ default-brightness-level = <7>;
+ enable-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+ pwms = <&pwm1 0 5000000>;
+ /* Disabled by default, unless display board plugged in. */
+ status = "disabled";
+ };
+
+ clk_xtal25: clk-xtal25 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ panel: panel {
+ backlight = <&backlight>;
+ power-supply = <®_panel_vcc>;
+ /* Disabled by default, unless display board plugged in. */
+ status = "disabled";
+ };
+
+ reg_panel_vcc: regulator-panel-vcc {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_panel_vcc_reg>;
+ regulator-name = "PANEL_VCC";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 6 0>;
+ enable-active-high;
+ /* Disabled by default, unless display board plugged in. */
+ status = "disabled";
+ };
+
+ reg_usdhc2_vcc: regulator-usdhc2-vcc {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2_vcc_reg>;
+ regulator-name = "V_3V3_SD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 19 0>;
+ enable-active-high;
+ };
+
+ watchdog-gpio {
+ /* TPS3813 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_watchdog_gpio>;
+ compatible = "linux,wdt-gpio";
+ always-enabled;
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ hw_algo = "level";
+ /* Reset triggers in 2..3 seconds */
+ hw_margin_ms = <1500>;
+ /* Disabled by default */
+ status = "disabled";
+ };
+};
+
+&A53_0 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&ddrc {
+ operating-points-v2 = <&ddrc_opp_table>;
+
+ ddrc_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-25M {
+ opp-hz = /bits/ 64 <25000000>;
+ };
+
+ opp-100M {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+
+ opp-750M {
+ opp-hz = /bits/ 64 <750000000>;
+ };
+ };
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ flash at 0 { /* W25Q128FVSI */
+ compatible = "jedec,spi-nor";
+ m25p,fast-read;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+};
+
+&ecspi2 { /* Feature connector SPI */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+ /* Disabled by default, unless feature board plugged in. */
+ status = "disabled";
+};
+
+&ecspi3 { /* Display connector SPI */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi3>;
+ cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+ /* Disabled by default, unless display board plugged in. */
+ status = "disabled";
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii-id";
+ phy-handle = <&fec1_phy>;
+ phy-supply = <&buck4_reg>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Atheros AR8031 PHY */
+ fec1_phy: ethernet-phy at 0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ /*
+ * Dedicated ENET_WOL# signal is unused, the PHY
+ * can wake the SoC up via INT signal as well.
+ */
+ interrupts-extended = <&gpio1 15 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <10000>;
+ qca,clk-out-frequency = <125000000>;
+ qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
+ qca,keep-pll-enabled;
+ vddio-supply = <&vddio>;
+
+ vddio: vddio-regulator {
+ regulator-name = "VDDIO";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vddh: vddh-regulator {
+ regulator-name = "VDDH";
+ };
+ };
+ };
+};
+
+&gpio1 {
+ gpio-line-names =
+ "", "ENET_RST#", "WDOG_B#", "PMIC_INT#",
+ "", "M2-B_PCIE_RST#", "M2-B_PCIE_WAKE#", "RTC_IRQ#",
+ "WDOG_KICK#", "M2-B_PCIE_CLKREQ#",
+ "USB1_OTG_ID_3V3", "ENET_WOL#",
+ "", "", "", "ENET_INT#",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+ gpio-line-names =
+ "MEMCFG2", "MEMCFG1", "DSI_RESET_1V8#", "DSI_IRQ_1V8#",
+ "M2-B_FULL_CARD_PWROFF_1V8#", "EEPROM_WP_1V8#",
+ "PCIE_CLK_GEN_CLKPWRGD_PD_1V8#", "GRAPHICS_PRSNT_1V8#",
+ "MEMCFG0", "WDOG_EN",
+ "M2-B_W_DISABLE1_WWAN_1V8#", "M2-B_W_DISABLE2_GPS_1V8#",
+ "", "", "", "",
+ "", "", "", "SD2_RESET#", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+ gpio-line-names =
+ "BL_ENABLE_1V8", "PG_V_IN_VAR#", "", "",
+ "", "", "TFT_ENABLE_1V8", "GRAPHICS_GPIO0_1V8",
+ "CSI_PD_1V8", "CSI_RESET_1V8#", "", "",
+ "", "", "", "",
+ "", "", "", "M2-B_WAKE_WWAN_1V8#",
+ "M2-B_RESET_1V8#", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names =
+ "NC0", "NC1", "BOOTCFG0", "BOOTCFG1",
+ "BOOTCFG2", "BOOTCFG3", "BOOTCFG4", "BOOTCFG5",
+ "BOOTCFG6", "BOOTCFG7", "NC10", "NC11",
+ "BOOTCFG8", "BOOTCFG9", "BOOTCFG10", "BOOTCFG11",
+ "BOOTCFG12", "BOOTCFG13", "BOOTCFG14", "BOOTCFG15",
+ "NC20", "", "", "",
+ "", "CAN_INT#", "CAN_RST#", "GPIO4_IO27",
+ "DIS_USB_DN2", "", "", "";
+};
+
+&gpio5 {
+ gpio-line-names =
+ "", "DIS_USB_DN1", "USBHUB_RESET#", "GPIO5_IO03",
+ "GPIO5_IO04", "", "", "",
+ "", "SPI1_CS#", "", "",
+ "", "SPI2_CS#", "I2C1_SCL_3V3", "I2C1_SDA_3V3",
+ "I2C2_SCL_3V3", "I2C2_SDA_3V3", "I2C3_SCL_3V3", "I2C3_SDA_3V3",
+ "I2C4_SCL_3V3", "I2C4_SDA_3V3", "", "",
+ "", "SPI3_CS#", "", "", "", "", "", "";
+};
+
+&i2c1 {
+ /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ pmic: pmic at 4b {
+ compatible = "rohm,bd71847";
+ reg = <0x4b>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ rohm,reset-snvs-powered;
+
+ /*
+ * i.MX 8M Mini Data Sheet for Consumer Products
+ * 3.1.3 Operating ranges
+ * MIMX8MM4DVTLZAA
+ */
+ regulators {
+ /* VDD_SOC */
+ buck1_reg: BUCK1 {
+ regulator-name = "buck1";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <1250>;
+ };
+
+ /* VDD_ARM */
+ buck2_reg: BUCK2 {
+ regulator-name = "buck2";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <1250>;
+ rohm,dvs-run-voltage = <1000000>;
+ rohm,dvs-idle-voltage = <950000>;
+ };
+
+ /* VDD_DRAM, BUCK5 */
+ buck3_reg: BUCK3 {
+ regulator-name = "buck3";
+ /* 1.5 GHz DDR bus clock */
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* 3V3_VDD, BUCK6 */
+ buck4_reg: BUCK4 {
+ regulator-name = "buck4";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* 1V8_VDD, BUCK7 */
+ buck5_reg: BUCK5 {
+ regulator-name = "buck5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* 1V1_NVCC_DRAM, BUCK8 */
+ buck6_reg: BUCK6 {
+ regulator-name = "buck6";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* 1V8_NVCC_SNVS */
+ ldo1_reg: LDO1 {
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* 0V8_VDD_SNVS */
+ ldo2_reg: LDO2 {
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* 1V8_VDDA */
+ ldo3_reg: LDO3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* 0V9_VDD_PHY */
+ ldo4_reg: LDO4 {
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* 1V2_VDD_PHY */
+ ldo6_reg: LDO6 {
+ regulator-name = "ldo6";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */
+ clock-frequency = <320000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
+ scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ usb-hub at 2c {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_hub>;
+ compatible = "microchip,usb2514bi";
+ reg = <0x2c>;
+ individual-port-switching;
+ reset-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+ self-powered;
+ };
+
+ eeprom: eeprom at 50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+
+ rtc: rtc at 68 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rtc>;
+ compatible = "st,m41t62";
+ reg = <0x68>;
+ interrupts-extended = <&gpio1 7 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ pcieclk: clk at 6a {
+ compatible = "renesas,9fgv0241";
+ reg = <0x6a>;
+ clocks = <&clk_xtal25>;
+ #clock-cells = <1>;
+ };
+};
+
+&i2c3 { /* Display connector I2C */
+ /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */
+ clock-frequency = <320000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ pinctrl-1 = <&pinctrl_i2c3_gpio>;
+ scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+};
+
+&i2c4 { /* Feature connector I2C */
+ /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */
+ clock-frequency = <320000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ pinctrl-1 = <&pinctrl_i2c4_gpio>;
+ scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog_feature>, <&pinctrl_hog_misc>,
+ <&pinctrl_hog_panel>, <&pinctrl_hog_sbc>,
+ <&pinctrl_panel_expansion>;
+
+ pinctrl_ecspi1: ecspi1-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x44
+ MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x44
+ MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x44
+ MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x40
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x44
+ MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x44
+ MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x44
+ MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x40
+ >;
+ };
+
+ pinctrl_ecspi3: ecspi3-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x44
+ MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x44
+ MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x44
+ MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x40
+ >;
+ };
+
+ pinctrl_fec1: fec1-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
+ MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
+ MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
+ MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
+ MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
+ MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
+ MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
+ MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
+ MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
+ MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
+ MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
+ MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
+ MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
+ MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
+ /* ENET_RST# */
+ MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x6
+ /* ENET_WOL# */
+ MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x40000090
+ /* ENET_INT# */
+ MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x40000090
+ >;
+ };
+
+ pinctrl_hog_feature: hog-feature-grp {
+ fsl,pins = <
+ /* GPIO4_IO27 */
+ MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x40000006
+ /* GPIO5_IO03 */
+ MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000006
+ /* GPIO5_IO04 */
+ MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x40000006
+
+ /* CAN_INT# */
+ MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25 0x40000090
+ /* CAN_RST# */
+ MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26 0x26
+ >;
+ };
+
+ pinctrl_hog_panel: hog-panel-grp {
+ fsl,pins = <
+ /* GRAPHICS_GPIO0_1V8 */
+ MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x26
+ >;
+ };
+
+ pinctrl_hog_misc: hog-misc-grp {
+ fsl,pins = <
+ /* PG_V_IN_VAR# */
+ MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x40000000
+ /* CSI_PD_1V8 */
+ MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8 0x0
+ /* CSI_RESET_1V8# */
+ MX8MM_IOMUXC_NAND_DATA03_GPIO3_IO9 0x0
+
+ /* DIS_USB_DN1 */
+ MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1 0x0
+ /* DIS_USB_DN2 */
+ MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x0
+
+ /* EEPROM_WP_1V8# */
+ MX8MM_IOMUXC_SD1_DATA3_GPIO2_IO5 0x100
+ /* PCIE_CLK_GEN_CLKPWRGD_PD_1V8# */
+ MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x0
+ /* GRAPHICS_PRSNT_1V8# */
+ MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7 0x40000000
+
+ /* CLK_CCM_CLKO1_3V3 */
+ MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1 0x10
+ >;
+ };
+
+ pinctrl_hog_sbc: hog-sbc-grp {
+ fsl,pins = <
+ /* MEMCFG[0..2] straps */
+ MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x40000140
+ MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1 0x40000140
+ MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0 0x40000140
+
+ /* BOOT_CFG[0..15] straps */
+ MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x40000000
+ MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x40000000
+ MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x40000000
+ MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x40000000
+ MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x40000000
+ MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000000
+ MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x40000000
+ MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x40000000
+ MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x40000000
+ MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x40000000
+ MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x40000000
+ MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x40000000
+ MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x40000000
+ MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x40000000
+ MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x40000000
+ MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x40000000
+
+ /* Not connected pins */
+ MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20 0x0
+ MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x0
+ MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x0
+ MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x0
+ MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1 0x0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x40000084
+ MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x40000084
+ >;
+ };
+
+ pinctrl_i2c1_gpio: i2c1-gpio-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14 0x84
+ MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15 0x84
+ >;
+ };
+
+ pinctrl_i2c2: i2c2-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000084
+ MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x40000084
+ >;
+ };
+
+ pinctrl_i2c2_gpio: i2c2-gpio-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16 0x84
+ MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17 0x84
+ >;
+ };
+
+ pinctrl_i2c3: i2c3-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x40000084
+ MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x40000084
+ >;
+ };
+
+ pinctrl_i2c3_gpio: i2c3-gpio-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18 0x84
+ MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19 0x84
+ >;
+ };
+
+ pinctrl_i2c4: i2c4-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x40000084
+ MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x40000084
+ >;
+ };
+
+ pinctrl_i2c4_gpio: i2c4-gpio-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20 0x84
+ MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0x84
+ >;
+ };
+
+ pinctrl_panel_backlight: panel-backlight-grp {
+ fsl,pins = <
+ /* BL_ENABLE_1V8 */
+ MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0 0x104
+ >;
+ };
+
+ pinctrl_panel_expansion: panel-expansion-grp {
+ fsl,pins = <
+ /* DSI_RESET_1V8# */
+ MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2 0x2
+ /* DSI_IRQ_1V8# */
+ MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3 0x40000090
+ >;
+ };
+
+ pinctrl_panel_vcc_reg: panel-vcc-grp {
+ fsl,pins = <
+ /* TFT_ENABLE_1V8 */
+ MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6 0x104
+ >;
+ };
+
+ pinctrl_panel_pwm: panel-pwm-grp {
+ fsl,pins = <
+ /* BL_PWM_3V3 */
+ MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x12
+ >;
+ };
+
+ pinctrl_pcie0: pcie-grp {
+ fsl,pins = <
+ /* M2-B_RESET_1V8# */
+ MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x102
+ /* M2-B_PCIE_RST# */
+ MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x2
+ /* M2-B_FULL_CARD_PWROFF_1V8# */
+ MX8MM_IOMUXC_SD1_DATA2_GPIO2_IO4 0x102
+ /* M2-B_W_DISABLE1_WWAN_1V8# */
+ MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x102
+ /* M2-B_W_DISABLE2_GPS_1V8# */
+ MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11 0x102
+ /* CLK_M2_32K768 */
+ MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x14
+ /* M2-B_WAKE_WWAN_1V8# */
+ MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x40000140
+ /* M2-B_PCIE_WAKE# */
+ MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000140
+ /* M2-B_PCIE_CLKREQ# */
+ MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x40000140
+ >;
+ };
+
+ pinctrl_pmic: pmic-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x40000090
+ >;
+ };
+
+ pinctrl_rtc: rtc-grp {
+ fsl,pins = <
+ /* RTC_IRQ# */
+ MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x40000090
+ >;
+ };
+
+ pinctrl_sai5: sai5-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK 0x100
+ MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0 0x0
+ MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC 0x100
+ MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0x100
+ MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0 0x100
+ >;
+ };
+
+ pinctrl_uart1: uart1-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x90
+ MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x90
+ MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x50
+ MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x50
+ >;
+ };
+
+ pinctrl_uart2: uart2-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x50
+ MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x90
+ MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x50
+ MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x90
+ >;
+ };
+
+ pinctrl_uart3: uart3-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x40
+ MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x40
+ >;
+ };
+
+ pinctrl_uart4: uart4-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x40
+ MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x40
+ >;
+ };
+
+ pinctrl_usb_hub: usb-hub-grp {
+ fsl,pins = <
+ /* USBHUB_RESET# */
+ MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x4
+ >;
+ };
+
+ pinctrl_usb_otg1: usb-otg1-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x40000000
+ MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x4
+ MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x40000090
+ >;
+ };
+
+ pinctrl_usdhc2_vcc_reg: usdhc2-vcc-reg-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x4
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
+ MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x400000d6
+ MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x0d6
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
+ MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x400000d6
+ MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x0d6
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
+ MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x400000d6
+ MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x0d6
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
+ MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B 0x40
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
+ MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B 0x40
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
+ MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B 0x40
+ >;
+ };
+
+ pinctrl_watchdog_gpio: watchdog-gpio-grp {
+ fsl,pins = <
+ /* WDOG_B# */
+ MX8MM_IOMUXC_GPIO1_IO02_GPIO1_IO2 0x26
+ /* WDOG_EN -- ungate WDT RESET# signal propagation */
+ MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9 0x6
+ /* WDOG_KICK# / WDI */
+ MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x26
+ >;
+ };
+};
+
+&pcie_phy {
+ fsl,clkreq-unsupported; /* CLKREQ_B is not connected to suitable input */
+ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+ fsl,tx-deemph-gen1 = <0x2d>;
+ fsl,tx-deemph-gen2 = <0xf>;
+ clocks = <&pcieclk 0>;
+ status = "okay";
+};
+
+&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie0>;
+ reset-gpio = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&pcieclk 0>;
+ clock-names = "pcie", "pcie_aux", "pcie_bus";
+ assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&clk IMX8MM_CLK_PCIE1_CTRL>;
+ assigned-clock-rates = <10000000>, <250000000>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+ <&clk IMX8MM_SYS_PLL2_250M>;
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_panel_pwm>;
+ /* Disabled by default, unless display board plugged in. */
+ status = "disabled";
+};
+
+&sai5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai5>;
+ fsl,sai-mclk-direction-output;
+ /* Input into codec PLL */
+ assigned-clocks = <&clk IMX8MM_CLK_SAI5>;
+ assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL2_OUT>;
+ assigned-clock-rates = <22579200>;
+ /* Disabled by default, unless display board plugged in. */
+ status = "disabled";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ uart-has-rtscts;
+ status = "disabled";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "disabled";
+};
+
+&uart3 { /* A53 Debug */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&uart4 { /* M4 Debug */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ /* UART4 is reserved for CM and RDC blocks CA access to UART4. */
+ status = "disabled";
+};
+
+&usbotg1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg1>;
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usdhc2 { /* MicroSD */
+ assigned-clocks = <&clk IMX8MM_CLK_USDHC2_ROOT>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ bus-width = <4>;
+ vmmc-supply = <®_usdhc2_vcc>;
+ status = "okay";
+};
+
+&usdhc3 { /* eMMC */
+ assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
+ assigned-clock-rates = <400000000>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ vmmc-supply = <&buck4_reg>;
+ vqmmc-supply = <&buck5_reg>;
+ status = "okay";
+};
+
+&wdog1 {
+ status = "okay";
+};
--
2.34.1
More information about the linux-arm-kernel
mailing list