[PATCH v2 6/7] media: imx: imx-mipi-csis: Add BGR888

[Laurent Pinchart]

Hi Jacopo,

Thank you for the patch.

On Fri, Feb 18, 2022 at 07:34:20PM +0100, Jacopo Mondi wrote:
> Add support for the BGR888_1X24 image formats.
> 
> The BGR888 format definition matches how pixel components are sent on
> the wire according to the CSI-2 specification.

A bit more information that you may want to capture, for readers who are
not familiar with this:

No existing media bus codes describe exactly the way data is transferred
on the CSI-2 bus. This is not a new issue, the CSI-2 YUV422 8-bit format
is described by MEDIA_BUS_FMT_UYVY8_1X16 which is an arbitrary
convention and not an exact match. Use the MEDIA_BUS_FMT_BGR888_1X24 to
follow the same convention, based on the order in which bits are
transmitted over the CSI-2 bus.

> Signed-off-by: Jacopo Mondi <jacopo at jmondi.org>
> ---
>  drivers/media/platform/imx/imx-mipi-csis.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/media/platform/imx/imx-mipi-csis.c b/drivers/media/platform/imx/imx-mipi-csis.c
> index c7a771e3fdf3..fdf133f81c5b 100644
> --- a/drivers/media/platform/imx/imx-mipi-csis.c
> +++ b/drivers/media/platform/imx/imx-mipi-csis.c
> @@ -366,6 +366,11 @@ static const struct csis_pix_format mipi_csis_formats[] = {
>  		.data_type = MIPI_CSI2_DATA_TYPE_RGB565,
>  		.width = 16,
>  	},
> +	{

	}, {

Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

> +		.code = MEDIA_BUS_FMT_BGR888_1X24,
> +		.data_type = MIPI_CSI2_DATA_TYPE_RGB888,
> +		.width = 24,
> +	},
>  	/* RAW (Bayer and greyscale) formats. */
>  	{
>  		.code = MEDIA_BUS_FMT_SBGGR8_1X8,

-- 
Regards,

Laurent Pinchart