[PATCH] iio: adc: aspeed: Add divider flag to fix incorrect voltage reading.

Jonathan Cameron jic23 at kernel.org
Sat Feb 19 08:00:02 PST 2022


On Fri, 18 Feb 2022 16:57:08 +0800
Billy Tsai <billy_tsai at aspeedtech.com> wrote:

> The formula for the ADC sampling period in ast2400/ast2500 is:
> ADC clock period = PCLK * 2 * (ADC0C[31:17] + 1) * (ADC0C[9:0])
> When ADC0C[9:0] is set to 0 the sampling voltage will be lower than
> expected, because the hardware may not have enough time to
> charge/discharge to a stable voltage.
> 
> Reported-by: Konstantin Klubnichkin <kitsok at yandex-team.ru>
> Signed-off-by: Billy Tsai <billy_tsai at aspeedtech.com>
Hi Billy,

Fixes tag?

Also, would be good to call out in the patch description that
CLK_DIVIDER_ONE_BASED rules at 0 as a valid value and hence
avoids the ADC0C[9:0] value of 0 that is causing problems.

That may be obvious to people who make frequent use of clk dividers
but it's not locally obvious when looking at this patch.

Otherwise looks good to me.

Thanks,

Jonathan

> ---
>  drivers/iio/adc/aspeed_adc.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c
> index a957cad1bfab..ffae64f39221 100644
> --- a/drivers/iio/adc/aspeed_adc.c
> +++ b/drivers/iio/adc/aspeed_adc.c
> @@ -539,7 +539,9 @@ static int aspeed_adc_probe(struct platform_device *pdev)
>  	data->clk_scaler = devm_clk_hw_register_divider(
>  		&pdev->dev, clk_name, clk_parent_name, scaler_flags,
>  		data->base + ASPEED_REG_CLOCK_CONTROL, 0,
> -		data->model_data->scaler_bit_width, 0, &data->clk_lock);
> +		data->model_data->scaler_bit_width,
> +		data->model_data->need_prescaler ? CLK_DIVIDER_ONE_BASED : 0,
> +		&data->clk_lock);
>  	if (IS_ERR(data->clk_scaler))
>  		return PTR_ERR(data->clk_scaler);
>  




More information about the linux-arm-kernel mailing list