[PATCH v4 13/15] ARM: dts: bcm2711: Enable V3D

[Stefan Wahren]

Hi Peter,

Am 13.02.22 um 23:56 schrieb Peter Robinson:
> This enables V3D for bcm2711 (used in the Raspberry Pi 4).
>
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne at suse.de>
> Signed-off-by: Peter Robinson <pbrobinson at gmail.com>
> ---
> Changes since v3:
> - Minor updates for rebase
>
> Changes since v1:
>  - Correct node's name address 
>
>  arch/arm/boot/dts/bcm2711.dtsi | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
> index 171fc5d2acef..9514c0ba481c 100644
> --- a/arch/arm/boot/dts/bcm2711.dtsi
> +++ b/arch/arm/boot/dts/bcm2711.dtsi
> @@ -551,6 +551,18 @@ genet_mdio: mdio at e14 {
>  				#size-cells = <0x0>;
>  			};
>  		};
> +
> +		v3d: gpu at 7ec00000 {
> +			compatible = "brcm,bcm2711-v3d";
> +			reg = <0x0 0x7ec00000 0x4000>,
> +			      <0x0 0x7ec04000 0x4000>;
> +			reg-names = "hub", "core0";
> +
> +			power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
> +			resets = <&pm BCM2835_RESET_V3D>;
> +			clocks = <&firmware_clocks 5>;

please move the firmware clock usage to bcm2711-rpi.dtsi, because it's
not defined here.

Best regards

> +			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
> +		};
>  	};
>  };
>