[v2 11/17] ASoC: mediatek: mt8186: support gpio control in platform driver
AngeloGioacchino Del Regno
angelogioacchino.delregno at collabora.com
Fri Feb 18 06:54:39 PST 2022
Il 17/02/22 14:41, Jiaxin Yu ha scritto:
> This patch add gpio control for all audio interface separately.
>
> Signed-off-by: Jiaxin Yu <jiaxin.yu at mediatek.com>
> ---
> sound/soc/mediatek/mt8186/mt8186-afe-gpio.c | 210 ++++++++++++++++++++
> sound/soc/mediatek/mt8186/mt8186-afe-gpio.h | 19 ++
> 2 files changed, 229 insertions(+)
> create mode 100644 sound/soc/mediatek/mt8186/mt8186-afe-gpio.c
> create mode 100644 sound/soc/mediatek/mt8186/mt8186-afe-gpio.h
>
> diff --git a/sound/soc/mediatek/mt8186/mt8186-afe-gpio.c b/sound/soc/mediatek/mt8186/mt8186-afe-gpio.c
> new file mode 100644
> index 000000000000..6faec5c95bf3
> --- /dev/null
> +++ b/sound/soc/mediatek/mt8186/mt8186-afe-gpio.c
> @@ -0,0 +1,210 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// mt8186-afe-gpio.c -- Mediatek 8186 afe gpio ctrl
> +//
> +// Copyright (c) 2022 MediaTek Inc.
> +// Author: Jiaxin Yu <jiaxin.yu at mediatek.com>
> +
> +#include <linux/gpio.h>
> +#include <linux/pinctrl/consumer.h>
> +
> +#include "mt8186-afe-common.h"
> +#include "mt8186-afe-gpio.h"
> +
> +struct pinctrl *aud_pinctrl;
> +
> +enum mt8186_afe_gpio {
> + MT8186_AFE_GPIO_CLK_MOSI_OFF,
> + MT8186_AFE_GPIO_CLK_MOSI_ON,
> + MT8186_AFE_GPIO_CLK_MISO_OFF,
> + MT8186_AFE_GPIO_CLK_MISO_ON,
> + MT8186_AFE_GPIO_DAT_MISO_OFF,
> + MT8186_AFE_GPIO_DAT_MISO_ON,
> + MT8186_AFE_GPIO_DAT_MOSI_OFF,
> + MT8186_AFE_GPIO_DAT_MOSI_ON,
> + MT8186_AFE_GPIO_I2S0_OFF,
> + MT8186_AFE_GPIO_I2S0_ON,
> + MT8186_AFE_GPIO_I2S1_OFF,
> + MT8186_AFE_GPIO_I2S1_ON,
> + MT8186_AFE_GPIO_I2S2_OFF,
> + MT8186_AFE_GPIO_I2S2_ON,
> + MT8186_AFE_GPIO_I2S3_OFF,
> + MT8186_AFE_GPIO_I2S3_ON,
> + MT8186_AFE_GPIO_TDM_OFF,
> + MT8186_AFE_GPIO_TDM_ON,
> + MT8186_AFE_GPIO_PCM_OFF,
> + MT8186_AFE_GPIO_PCM_ON,
> + MT8186_AFE_GPIO_GPIO_NUM
> +};
> +
> +struct audio_gpio_attr {
> + const char *name;
> + bool gpio_prepare;
> + struct pinctrl_state *gpioctrl;
> +};
> +
> +static struct audio_gpio_attr aud_gpios[MT8186_AFE_GPIO_GPIO_NUM] = {
> + [MT8186_AFE_GPIO_CLK_MOSI_OFF] = {"aud_clk_mosi_off", false, NULL},
> + [MT8186_AFE_GPIO_CLK_MOSI_ON] = {"aud_clk_mosi_on", false, NULL},
> + [MT8186_AFE_GPIO_CLK_MISO_OFF] = {"aud_clk_miso_off", false, NULL},
> + [MT8186_AFE_GPIO_CLK_MISO_ON] = {"aud_clk_miso_on", false, NULL},
> + [MT8186_AFE_GPIO_DAT_MISO_OFF] = {"aud_dat_miso_off", false, NULL},
> + [MT8186_AFE_GPIO_DAT_MISO_ON] = {"aud_dat_miso_on", false, NULL},
> + [MT8186_AFE_GPIO_DAT_MOSI_OFF] = {"aud_dat_mosi_off", false, NULL},
> + [MT8186_AFE_GPIO_DAT_MOSI_ON] = {"aud_dat_mosi_on", false, NULL},
> + [MT8186_AFE_GPIO_I2S0_OFF] = {"aud_gpio_i2s0_off", false, NULL},
> + [MT8186_AFE_GPIO_I2S0_ON] = {"aud_gpio_i2s0_on", false, NULL},
> + [MT8186_AFE_GPIO_I2S1_OFF] = {"aud_gpio_i2s1_off", false, NULL},
> + [MT8186_AFE_GPIO_I2S1_ON] = {"aud_gpio_i2s1_on", false, NULL},
> + [MT8186_AFE_GPIO_I2S2_OFF] = {"aud_gpio_i2s2_off", false, NULL},
> + [MT8186_AFE_GPIO_I2S2_ON] = {"aud_gpio_i2s2_on", false, NULL},
> + [MT8186_AFE_GPIO_I2S3_OFF] = {"aud_gpio_i2s3_off", false, NULL},
> + [MT8186_AFE_GPIO_I2S3_ON] = {"aud_gpio_i2s3_on", false, NULL},
> + [MT8186_AFE_GPIO_TDM_OFF] = {"aud_gpio_tdm_off", false, NULL},
> + [MT8186_AFE_GPIO_TDM_ON] = {"aud_gpio_tdm_on", false, NULL},
> + [MT8186_AFE_GPIO_PCM_OFF] = {"aud_gpio_pcm_off", false, NULL},
> + [MT8186_AFE_GPIO_PCM_ON] = {"aud_gpio_pcm_on", false, NULL},
> +};
> +
> +static DEFINE_MUTEX(gpio_request_mutex);
> +
> +int mt8186_afe_gpio_init(struct device *dev)
> +{
> + int ret;
> + int i = 0;
> +
> + aud_pinctrl = devm_pinctrl_get(dev);
> + if (IS_ERR(aud_pinctrl)) {
> + ret = PTR_ERR(aud_pinctrl);
> + dev_info(dev, "%s(), ret %d, cannot get aud_pinctrl!\n",
> + __func__, ret);
dev_err()
... and return ret.
> + return -ENODEV;
> + }
> +
> + for (i = 0; i < ARRAY_SIZE(aud_gpios); i++) {
> + aud_gpios[i].gpioctrl = pinctrl_lookup_state(aud_pinctrl,
> + aud_gpios[i].name);
> + if (IS_ERR(aud_gpios[i].gpioctrl)) {
> + ret = PTR_ERR(aud_gpios[i].gpioctrl);
> + dev_info(dev, "%s(), pinctrl_lookup_state %s fail, ret %d\n",
> + __func__, aud_gpios[i].name, ret);
dev_err()
P.S.: I think that this function should return ret, at this point, to avoid
unexpected behavior.
> + } else {
> + aud_gpios[i].gpio_prepare = true;
> + }
> + }
> +
> + /* gpio status init */
> + mt8186_afe_gpio_request(dev, false, MT8186_DAI_ADDA, 0);
> + mt8186_afe_gpio_request(dev, false, MT8186_DAI_ADDA, 1);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(mt8186_afe_gpio_init);
> +
> +static int mt8186_afe_gpio_select(struct device *dev,
> + enum mt8186_afe_gpio type)
> +{
> + int ret = 0;
> +
> + if (type < 0 || type >= MT8186_AFE_GPIO_GPIO_NUM) {
> + dev_info(dev, "%s(), error, invalid gpio type %d\n",
> + __func__, type);
> + return -EINVAL;
> + }
> +
> + if (!aud_gpios[type].gpio_prepare) {
> + dev_info(dev, "%s(), error, gpio type %d not prepared\n",
> + __func__, type);
> + return -EIO;
> + }
> +
> + ret = pinctrl_select_state(aud_pinctrl,
> + aud_gpios[type].gpioctrl);
> + if (ret)
> + dev_info(dev, "%s(), error, can not set gpio type %d\n",
> + __func__, type);
> +
> + return ret;
Please change it like so:
if (ret) {
dev_err(dev, "Failed to select picntrl state for type %d\n", type);
return ret;
}
return 0;
> +}
> +
> +static int mt8186_afe_gpio_adda_dl(struct device *dev, bool enable)
> +{
> + if (enable) {
> + mt8186_afe_gpio_select(dev, MT8186_AFE_GPIO_CLK_MOSI_ON);
> + mt8186_afe_gpio_select(dev, MT8186_AFE_GPIO_DAT_MOSI_ON);
> + } else {
> + mt8186_afe_gpio_select(dev, MT8186_AFE_GPIO_DAT_MOSI_OFF);
> + mt8186_afe_gpio_select(dev, MT8186_AFE_GPIO_CLK_MOSI_OFF);
> + }
> +
> + return 0;
> +}
> +
> +static int mt8186_afe_gpio_adda_ul(struct device *dev, bool enable)
> +{
> + if (enable) {
> + mt8186_afe_gpio_select(dev, MT8186_AFE_GPIO_CLK_MISO_ON);
> + mt8186_afe_gpio_select(dev, MT8186_AFE_GPIO_DAT_MISO_ON);
> + } else {
> + mt8186_afe_gpio_select(dev, MT8186_AFE_GPIO_DAT_MISO_OFF);
> + mt8186_afe_gpio_select(dev, MT8186_AFE_GPIO_CLK_MISO_OFF);
> + }
> +
> + return 0;
> +}
> +
> +int mt8186_afe_gpio_request(struct device *dev, bool enable,
> + int dai, int uplink)
> +{
I think that it's more readable and even shorter if you do:
enum mt8186_afe_gpio sel;
int ret = -EINVAL;
mutex_lock(&gpio_request_mutex);
switch (dai) {
case MT8186_DAI_ADDA:
if (uplink)
ret = mt8186_afe_gpio_adda_ul(dev, enable);
else
ret = mt8186_afe_gpio_adda_dl(dev, enable);
goto unlock;
case MT8186_DAI_I2S_0:
sel = enable ? MT8186_AFE_GPIO_I2S0_ON : MT8186_AFE_GPIO_I2S0_OFF;
break;
case MT8186_DAI_I2S_1:
sel = enable ? MT8186_AFE_GPIO_I2S1_ON : MT8186_AFE_GPIO_I2S1_OFF;
break;
.................... all other cases ................
default:
dev_err(dev, "invalid dai %d\n", dai);
goto unlock;
}
ret = mt8186_afe_gpio_select(dev, sel);
unlock:
mutex_unlock(&gpio_request_mutex);
return ret;
}
> + mutex_lock(&gpio_request_mutex);
> + switch (dai) {
> + case MT8186_DAI_ADDA:
> + if (uplink)
> + mt8186_afe_gpio_adda_ul(dev, enable);
> + else
> + mt8186_afe_gpio_adda_dl(dev, enable);
> + break;
> + case MT8186_DAI_I2S_0:
> + if (enable)
> + mt8186_afe_gpio_select(dev, MT8186_AFE_GPIO_I2S0_ON);
> + else
> + mt8186_afe_gpio_select(dev, MT8186_AFE_GPIO_I2S0_OFF);
> + break;
> + case MT8186_DAI_I2S_1:
> + if (enable)
> + mt8186_afe_gpio_select(dev, MT8186_AFE_GPIO_I2S1_ON);
> + else
> + mt8186_afe_gpio_select(dev, MT8186_AFE_GPIO_I2S1_OFF);
> + break;
> + case MT8186_DAI_I2S_2:
> + if (enable)
> + mt8186_afe_gpio_select(dev, MT8186_AFE_GPIO_I2S2_ON);
> + else
> + mt8186_afe_gpio_select(dev, MT8186_AFE_GPIO_I2S2_OFF);
> + break;
> + case MT8186_DAI_I2S_3:
> + if (enable)
> + mt8186_afe_gpio_select(dev, MT8186_AFE_GPIO_I2S3_ON);
> + else
> + mt8186_afe_gpio_select(dev, MT8186_AFE_GPIO_I2S3_OFF);
> + break;
> + case MT8186_DAI_TDM_IN:
> + if (enable)
> + mt8186_afe_gpio_select(dev, MT8186_AFE_GPIO_TDM_ON);
> + else
> + mt8186_afe_gpio_select(dev, MT8186_AFE_GPIO_TDM_OFF);
> + break;
> + case MT8186_DAI_PCM:
> + if (enable)
> + mt8186_afe_gpio_select(dev, MT8186_AFE_GPIO_PCM_ON);
> + else
> + mt8186_afe_gpio_select(dev, MT8186_AFE_GPIO_PCM_OFF);
> + break;
> + default:
> + mutex_unlock(&gpio_request_mutex);
> + dev_info(dev, "%s(), invalid dai %d\n", __func__, dai);
> + return -EINVAL;
> + }
> + mutex_unlock(&gpio_request_mutex);
> + return 0;
> +}
> diff --git a/sound/soc/mediatek/mt8186/mt8186-afe-gpio.h b/sound/soc/mediatek/mt8186/mt8186-afe-gpio.h
> new file mode 100644
> index 000000000000..1ddc27838eb1
> --- /dev/null
> +++ b/sound/soc/mediatek/mt8186/mt8186-afe-gpio.h
> @@ -0,0 +1,19 @@
> +/* SPDX-License-Identifier: GPL-2.0
> + *
> + * mt6833-afe-gpio.h -- Mediatek 6833 afe gpio ctrl definition
> + *
> + * Copyright (c) 2022 MediaTek Inc.
> + * Author: Jiaxin Yu <jiaxin.yu at mediatek.com>
> + */
> +
> +#ifndef _MT8186_AFE_GPIO_H_
> +#define _MT8186_AFE_GPIO_H_
> +
> +struct mtk_base_afe;
> +
> +int mt8186_afe_gpio_init(struct device *dev);
> +
> +int mt8186_afe_gpio_request(struct device *dev, bool enable,
> + int dai, int uplink);
> +
> +#endif
More information about the linux-arm-kernel
mailing list