[PATCH v2 5/7] arm64: dts: imx8mp-phycore-som: Set VDD_ARM run and standby voltage

[Teresa Remmet]

Add bindings for VDD_ARM (BUCK2) run and standby voltage.

Signed-off-by: Teresa Remmet <t.remmet at phytec.de>
---
 arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
index fb84032e529f..4855bfc9e6a3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
@@ -114,6 +114,8 @@ buck2: BUCK2 {
 				regulator-boot-on;
 				regulator-always-on;
 				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
 			};
 
 			buck4: BUCK4 {
-- 
2.25.1