[RFC v2 0/8] Move HEVC stateless controls out of staging

Hans Verkuil hverkuil-cisco at xs4all.nl
Fri Feb 18 03:05:51 PST 2022


On 18/02/2022 11:54, Benjamin Gaignard wrote:
> 
> Le 18/02/2022 à 10:59, Hans Verkuil a écrit :
>> Hi Benjamin,
>>
>> On 15/02/2022 12:00, Benjamin Gaignard wrote:
>>> This series aims to make HEVC uapi stable and usable for hardware
>>> decoder. HEVC uapi is used by 2 mainlined drivers (Cedrus and Hantro)
>>> and 2 out of the tree drivers (rkvdec and RPI).
>>>
>>> The 3 first patches are from Hans to implement v4l2 dynamic control
>>> feature which is need by patch 7 for V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSET
>>> definition.
>>>
>>> Patch 4 move the existing uapi to stable, including definitions renaming
>>> and CID number change to fit with v4l2 naming.
>>>
>>> Patches 5 and 7 add fields needed for rkvdec and RPI decoders.
>>>
>>> Patches 6 is cleaning up the uapi of useless field.
>>> Patches 8 change one field description and name to define offset by
>>> bytes rather than by bits
>> I have some housekeeping questions:
>>
>> I have several older HEVC-related patches from you, which of those are still
>> valid?
>>
>> "[v4,0/9] Additional features for Hantro HEVC":
>> https://patchwork.linuxtv.org/project/linux-media/cover/20210625141143.577998-1-benjamin.gaignard@collabora.com/
>>
>> "media: hevc: fix pictures lists type":
>> https://patchwork.linuxtv.org/project/linux-media/patch/20210823082949.237716-1-benjamin.gaignard@collabora.com/
>>
>> "media: hantro: Trace hevc hw cycles performance register":
>> https://patchwork.linuxtv.org/project/linux-media/patch/20210823135606.633052-1-benjamin.gaignard@collabora.com/
>>
>> "media: hantro: Add support of compressed reference buffers"
>> https://patchwork.linuxtv.org/project/linux-media/patch/20210823162916.824336-1-benjamin.gaignard@collabora.com/
>>
>> Before moving the HEVC API out of staging I would prefer to have any remaining
>> issues fixed. So one series that adds any remaining fixes (i.e. from the older patches
>> mentioned above), and a second series on top that moves it out of staging.
> 
> Hi Hans,
> 
> They are all related to Hantro diver and, after post-proc patches, the internal driver design
> has change so they won't apply anymore. You can discard them.

OK, I'll mark them as Obsoleted.

> HEVC UAPI migration isn't not impacted by these patches.
> My plan is a finish the HEVC UAPI first, send patches to add features (compression, 10bits, scaling)
> to Hantro driver and finally move it out of staging too.
> If possible I would like to not make HEVC UAPI topic depends of Hantro features.
> 
> Does that makes sense for you ?

Well, only if you are absolutely certain that those features won't impact the uAPI.
The easiest way to do that is to implement them and show that it doesn't :-)

That's really my main concern: that those additions require uAPI changes.

Looking over those patches it appears that this is the only one touching on
the uAPI:

"media: hevc: fix pictures lists type":
https://patchwork.linuxtv.org/project/linux-media/patch/20210823082949.237716-1-benjamin.gaignard@collabora.com/

I haven't read all the comments in details, but it is something that needs to
be clarified.

Regards,

	Hans

> 
> Regards,
> Benjamin
> 
>>
>> That way I can mark the older patches as Superseded, and we have a
>> fresh series that we can discuss.
>>
>> Regards,
>>
>>     Hans
>>
>>> Benjamin
>>>
>>> Benjamin Gaignard (5):
>>>    media: uapi: Move HEVC stateless controls out of staging
>>>    media: uapi: Add fields needed for RKVDEC driver
>>>    media: uapi: Remove bit_size field from v4l2_ctrl_hevc_slice_params
>>>    media: uapi: Add V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSET control
>>>    media: uapi: Change data_bit_offset definition
>>>
>>> Hans Verkuil (3):
>>>    videodev2.h: add V4L2_CTRL_FLAG_DYNAMIC_ARRAY
>>>    v4l2-ctrls: add support for dynamically allocated arrays.
>>>    vivid: add dynamic array test control
>>>
>>>   .../userspace-api/media/drivers/hantro.rst    |   5 -
>>>   .../media/v4l/ext-ctrls-codec.rst             |  58 ++--
>>>   .../media/v4l/vidioc-queryctrl.rst            |   8 +
>>>   .../media/test-drivers/vivid/vivid-ctrls.c    |  15 ++
>>>   drivers/media/v4l2-core/v4l2-ctrls-api.c      | 103 ++++++--
>>>   drivers/media/v4l2-core/v4l2-ctrls-core.c     | 182 ++++++++++---
>>>   drivers/media/v4l2-core/v4l2-ctrls-defs.c     |  32 +--
>>>   drivers/media/v4l2-core/v4l2-ctrls-priv.h     |   3 +-
>>>   drivers/media/v4l2-core/v4l2-ctrls-request.c  |  13 +-
>>>   drivers/staging/media/hantro/hantro_drv.c     |  27 +-
>>>   drivers/staging/media/hantro/hantro_hevc.c    |   8 +-
>>>   drivers/staging/media/sunxi/cedrus/cedrus.c   |  24 +-
>>>   .../staging/media/sunxi/cedrus/cedrus_dec.c   |  10 +-
>>>   .../staging/media/sunxi/cedrus/cedrus_h265.c  |  13 +-
>>>   include/linux/hantro-media.h                  |  17 ++
>>>   include/media/hevc-ctrls.h                    | 250 ------------------
>>>   include/media/v4l2-ctrls.h                    |  48 +++-
>>>   include/uapi/linux/v4l2-controls.h            | 224 ++++++++++++++++
>>>   include/uapi/linux/videodev2.h                |   8 +
>>>   19 files changed, 640 insertions(+), 408 deletions(-)
>>>   create mode 100644 include/linux/hantro-media.h
>>>   delete mode 100644 include/media/hevc-ctrls.h
>>>




More information about the linux-arm-kernel mailing list